android串口gdb调试,将GDB通过串口连接到KGDB构建内核的问题

我想通过串口ttyS0从我的64位suse机器调试MIPS linux驱动程序.使用的gdb通过LAN调试应用程序而不是kgdb over serial.我使用此页面和其他一些内容来启动调试,但没有最终结果.

我的内核使用以下设置编译:

CONFIG_MAGIC_SYSRQ=y

CONFIG_HAVE_ARCH_KGDB=y

CONFIG_KGDB=y

CONFIG_KGDB_SERIAL_CONSOLE=y

# CONFIG_KGDB_TESTS is not set

CONFIG_CMDLINE="kgdboc=ttyS0,115200"

如果我运行gdb:

gdb vmlinux

(gdb) set remotebaud 115200

(gdb) set debug remote 1

(gdb) target remote /dev/ttyS0

我可以观察以下输出:

输出(GDB_TERMINAL):

(gdb) target remote /dev/ttyS0

Remote debugging using /dev/ttyS0

Sending packet: $qSupported:qRelocInsn+#9a...Ack

Timeout in mid-packet, retrying

Timed out.

Timed out.

Ignoring packet error, continuing...

Packet qSupported (supported-packets) is supported

warning: unrecognized item "qSupported:qRelocIns" in "qSupported" response

Sending packet: $Hg0#df...Nak

Sending packet: $Hg0#df...Ack

Packet received: Hg0

Sending packet: $?#3f...Packet instead of Ack, ignoring it

Ack

Timed out.

Timed out.

Timed out.

Ignoring packet error, continuing...

Sending packet: $Hc-1#09...Nak

Sending packet: $Hc-1#09...Ack

Reply contains invalid hex digit 36

输出(REMOTE_TARGET):

+$?#3f09n+#9a$Hg0#df+09

没有更多的事情发生!

我也测试了sysrq但是提到的sysrq-option'g'似乎不适合!

echo b > /proc/sysrq-trigger

#successfully reboot

echo g > /proc/sysrq-trigger

#prints only the help message (SysRq : HELP : loglevel(0-9) reBoot Crash termin .....)

sysrq是否正常运行？

有没有我错过的东西？

有没有办法测试我的远程设备上运行的kgdb？