linux树莓派跑马灯,树莓派/香蕉派 pro 跑马灯

拿到香蕉派pro，为了熟悉树莓派的系统和python控制GPIO，写个跑马灯玩玩。

1、sudo apt-get update

2、sudo apt-get install python-dev

3、按github安装香蕉派pro的rpi.gpio

4、香蕉派pro代码，6个二极管闪烁三次后，开始跑马灯，执行两次后，再次闪烁三次。

import RPi.GPIO as GPIO

import time

# 声明针脚

PIN_8 = 8

PIN_10 = 10

PIN_11 = 11

PIN_13 = 13

PIN_15 = 15

PIN_31 = 31

# 电源长接，所以针脚低电平，灯点亮

myFlag = 0

myTime = 1

GPIO.setmode(GPIO.BOARD)

arr = (PIN_11, PIN_13, PIN_15, PIN_31, PIN_8, PIN_10);

for pin in arr:

GPIO.setup(pin, GPIO.OUT)

# 所有灯灭

for pin in arr:

GPIO.output(pin, 1)

i = 0;

while True:

if i % 2 == 0:

for num in range(0, 3):

for pin in arr:

GPIO.output(pin, 0)

time.sleep(0.4);

for pin in arr:

GPIO.output(pin, 1)

time.sleep(0.4);

time.sleep(1);

for pin in arr:

GPIO.output(pin, myFlag)

for otherPin in arr:

if pin != otherPin:

GPIO.output(otherPin, not myFlag)

time.sleep(myTime)

i = i+1