SSH远程登录设置:
Switch#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#hostname cisco-sw1 交换机重新命名
cisco-sw1(config)#ip domain-name cisco.com 配置域名
cisco-sw1(config)#line vty 0 4
cisco-sw1(config-line)#transport input ssh 登录方式为SSH
cisco-sw1(config-line)#exit
cisco-sw1(config)#crypto key generate rsa 配置秘钥
The name for the keys will be: cisco-sw1.cisco.com
Choose the size of the key modulus in the range of 360 to 2048 for your
General Purpose Keys. Choosing a key modulus greater than 512 may take
a few minutes.
How many bits in the modulus [512]: 1024 思科推荐使用1024
% Generating 1024 bit RSA keys, keys will be non-exportable...[OK]