四阶魔方java1002四阶魔方java_4x4四阶魔方一看就懂,超简单入门图文教程1:基本知识和操作...

大家好,欢迎来到大超小志,今天我们开始一起学习四阶魔方。在学习之前,我们还是老规矩,先要了解四阶魔方。

181218159_1_20200127020323456

其实,四阶魔方是二阶魔方和三阶魔方的结合体,为什么这么说呢,大家可以观察一下,中心的这四个中心块跟二阶魔方是一样的。所以说,四阶魔方里面就像嵌套了一个二阶魔方,我们拿一个二阶魔方来看一下。

181218159_2_20200127020323597

而如果把里面嵌套的这个二阶魔方看成一个整体的话,又会变成了三阶魔方,我们拿一个三阶魔方来对比一下。我们把四阶魔方的四个中心块组合成一个整体,相当于三阶魔方的中心块,把四阶魔方的两个棱块组合成一个整体,又相当于三阶魔方的一个棱块。剩下的四个角块和三阶魔方是一样的,不需要合并。

181218159_3_20200127020323722

对比完了以后,就很清楚我们的复原思路了,我们要先把最中心的二阶魔方先复原了,也就是把每个面的四个中心块合并在一起。然后把所有相同的棱块组合在一起,这样就把四阶魔方降阶为一个三阶魔方,最后按照三阶魔方的复原方法把四阶魔方最终复原。

既然降阶为一个三阶魔方,那么三阶魔方里面的公式在四阶魔方里面同样适用,比如“上拨下回”、“上拨下拨上拨拨下”等都可以用在四阶魔方。

但是,四阶魔方和三阶魔方还是有区别的。

首先,三阶魔方的中心块是固定的,复原的时候不用考虑中心块的顺序。而四阶魔方的中心块不是固定的,这就需要你在合并中心块的时候,一定要按照“下白上黄,蓝红绿橙”的顺序,否则,后面你会遇到问题,这一点和二阶魔方是一致的。

另外,四阶魔方还会遇到三阶魔方里面没有的特殊情况,主要出现在顶层棱块和角块的复原步骤中,到时候再详细解说。

好了,四阶魔方的基本知识和操作先了解到这里,有问题请在评论区或者公众号留言,下节课我们就正式开始讲四阶魔方复原的第一步:复原中心块,如果你喜欢本教程,请多多订阅和分享,谢谢!

  • 0
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
当然可以,以下是一个在 Code::Blocks 中使用 OpenGL 的 GLUT 库绘制四阶魔方的示例代码。由于代码比较长,我会把代码分开来逐一解释。 ```c #include <stdio.h> #include <stdlib.h> #include <GL/glut.h> #define WINDOW_WIDTH 800 #define WINDOW_HEIGHT 600 #define CUBE_SIZE 1.0f #define CUBE_GAP 0.1f #define CUBE_TOTAL_SIZE (CUBE_SIZE + CUBE_GAP) #define ROTATE_STEP 3.0f #define KEY_UP 101 #define KEY_DOWN 103 #define KEY_LEFT 100 #define KEY_RIGHT 102 typedef enum { FRONT, BACK, LEFT, RIGHT, UP, DOWN } Direction; typedef struct { GLfloat x; GLfloat y; GLfloat z; } Point3D; typedef struct { GLfloat r; GLfloat g; GLfloat b; } ColorRGB; typedef struct { Point3D pos; ColorRGB color; } Cube; static GLfloat angleX = 0.0f; static GLfloat angleY = 0.0f; static Cube cubes[4][4][4]; static GLfloat cameraX = 10.0f; static GLfloat cameraY = 10.0f; static GLfloat cameraZ = 10.0f; static Direction currentDirection = FRONT; static int currentLayer = 0; static void initCubes() { int i, j, k; for (i = 0; i < 4; i++) { for (j = 0; j < 4; j++) { for (k = 0; k < 4; k++) { Cube *cube = &cubes[i][j][k]; cube->pos.x = (i - 1.5f) * CUBE_TOTAL_SIZE; cube->pos.y = (j - 1.5f) * CUBE_TOTAL_SIZE; cube->pos.z = (k - 1.5f) * CUBE_TOTAL_SIZE; cube->color.r = (GLfloat) i / 4.0f; cube->color.g = (GLfloat) j / 4.0f; cube->color.b = (GLfloat) k / 4.0f; } } } } static void drawCube(Cube *cube) { glColor3f(cube->color.r, cube->color.g, cube->color.b); glPushMatrix(); glTranslatef(cube->pos.x, cube->pos.y, cube->pos.z); glutSolidCube(CUBE_SIZE); glPopMatrix(); } static void drawCubes() { int i, j, k; for (i = 0; i < 4; i++) { for (j = 0; j < 4; j++) { for (k = 0; k < 4; k++) { drawCube(&cubes[i][j][k]); } } } } static void drawAxis() { glBegin(GL_LINES); glColor3f(1.0f, 0.0f, 0.0f); glVertex3f(0.0f, 0.0f, 0.0f); glVertex3f(10.0f, 0.0f, 0.0f); glColor3f(0.0f, 1.0f, 0.0f); glVertex3f(0.0f, 0.0f, 0.0f); glVertex3f(0.0f, 10.0f, 0.0f); glColor3f(0.0f, 0.0f, 1.0f); glVertex3f(0.0f, 0.0f, 0.0f); glVertex3f(0.0f, 0.0f, 10.0f); glEnd(); } static void display() { glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glMatrixMode(GL_MODELVIEW); glLoadIdentity(); gluLookAt(cameraX, cameraY, cameraZ, 0.0f, 0.0f, 0.0f, 0.0f, 1.0f, 0.0f); glPushMatrix(); glRotatef(angleX, 1.0f, 0.0f, 0.0f); glRotatef(angleY, 0.0f, 1.0f, 0.0f); drawCubes(); glPopMatrix(); drawAxis(); glutSwapBuffers(); } static void reshape(GLsizei width, GLsizei height) { glViewport(0, 0, width, height); glMatrixMode(GL_PROJECTION); glLoadIdentity(); gluPerspective(45.0f, (GLfloat) width / (GLfloat) height, 0.1f, 100.0f); } static void rotateLayer(int layer, Direction direction) { Cube tempCubes[4][4]; int i, j; for (i = 0; i < 4; i++) { for (j = 0; j < 4; j++) { switch (direction) { case FRONT: tempCubes[i][j] = cubes[layer][i][j]; break; case BACK: tempCubes[i][j] = cubes[layer][3 - i][3 - j]; break; case LEFT: tempCubes[i][j] = cubes[3 - j][layer][3 - i]; break; case RIGHT: tempCubes[i][j] = cubes[j][layer][i]; break; case UP: tempCubes[i][j] = cubes[i][3 - layer][3 - j]; break; case DOWN: tempCubes[i][j] = cubes[i][layer][j]; break; } } } for (i = 0; i < 4; i++) { for (j = 0; j < 4; j++) { switch (direction) { case FRONT: cubes[layer][i][j] = tempCubes[j][3 - i]; break; case BACK: cubes[layer][i][j] = tempCubes[3 - j][i]; break; case LEFT: cubes[3 - j][layer][3 - i] = tempCubes[i][j]; break; case RIGHT: cubes[j][layer][i] = tempCubes[i][j]; break; case UP: cubes[i][3 - layer][3 - j] = tempCubes[j][3 - i]; break; case DOWN: cubes[i][layer][j] = tempCubes[j][3 - i]; break; } } } } static void rotateCurrentLayer(Direction direction) { rotateLayer(currentLayer, direction); } static void specialKey(int key, int x, int y) { switch (key) { case KEY_UP: angleX += ROTATE_STEP; break; case KEY_DOWN: angleX -= ROTATE_STEP; break; case KEY_LEFT: angleY += ROTATE_STEP; break; case KEY_RIGHT: angleY -= ROTATE_STEP; break; } glutPostRedisplay(); } static void keyboard(unsigned char key, int x, int y) { switch (key) { case 'f': currentDirection = FRONT; currentLayer = 0; break; case 'b': currentDirection = BACK; currentLayer = 3; break; case 'l': currentDirection = LEFT; currentLayer = 0; break; case 'r': currentDirection = RIGHT; currentLayer = 3; break; case 'u': currentDirection = UP; currentLayer = 3; break; case 'd': currentDirection = DOWN; currentLayer = 0; break; case 'F': rotateCurrentLayer(FRONT); break; case 'B': rotateCurrentLayer(BACK); break; case 'L': rotateCurrentLayer(LEFT); break; case 'R': rotateCurrentLayer(RIGHT); break; case 'U': rotateCurrentLayer(UP); break; case 'D': rotateCurrentLayer(DOWN); break; case 'q': exit(0); break; } glutPostRedisplay(); } int main(int argc, char **argv) { glutInit(&argc, argv); glutInitDisplayMode(GLUT_DOUBLE | GLUT_RGB | GLUT_DEPTH); glutInitWindowSize(WINDOW_WIDTH, WINDOW_HEIGHT); glutCreateWindow("4x4x4 Rubik's Cube"); initCubes(); glutDisplayFunc(display); glutReshapeFunc(reshape); glutSpecialFunc(specialKey); glutKeyboardFunc(keyboard); glEnable(GL_DEPTH_TEST); glutMainLoop(); return 0; } ``` 首先,我们需要定义一些常量和数据结构。在这个示例中,我们定义了窗口的大小,每个小方的大小,旋转步长,方向和颜色等信息。我们使用一个三维数组 `cubes` 来存储所有的小方,每个方包含了位置和颜色信息。 接下来,我们需要实现一些绘制函数。`drawCube` 函数用于绘制一个小方,`drawCubes` 函数用于绘制所有的小方,`drawAxis` 函数用于绘制坐标轴。在 `display` 函数中,我们使用 OpenGL 的矩阵操作来控制摄像机位置和旋转角度,然后分别调用上述绘制函数来绘制场景。 我们还需要实现一些交互函数。`rotateLayer` 函数用于旋转一个层,`rotateCurrentLayer` 函数用于旋转当前选中的层,`specialKey` 函数用于响应特殊按键事件(如方向键),`keyboard` 函数用于响应普通按键事件(如字母键)。在 `main` 函数中,我们创建窗口并注册这些函数,然后进入主循环。 这段代码只是一个示例,可能不够完整和健壮。如果你想要学习更多关于 OpenGL 和 GLUT 的内容,可以参考一些教程和书籍,如《OpenGL Programming Guide》和《OpenGL SuperBible》等。

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值