linux内核配置成qspi挂载,Zynq-Linux移植学习笔记之11-qspi驱动配置

1、  devicetree配置

devicetree中涉及到QSPI FLASH的部分如下：

spi@e000d000 {

clock-names= "ref_clk", "pclk";

clocks= <0x1 0xa 0x1 0x2b>;

compatible ="xlnx,zynq-qspi-1.0";

status= "okay";

interrupt-parent= <0x3>;

interrupts= <0x0 0x13 0x4>;

reg= <0xe000d000 0x1000>;

#address-cells= <0x1>;

#size-cells= <0x0>;

is-dual = <0x0>;

num-cs = <0x1>;

flash@0{

compatible ="n25q256a13";

reg= <0x0>;

spi-tx-bus-width= <0x1>;

spi-rx-bus-width= <0x4>;

spi-max-frequency= <0x2faf080>;

#address-cells= <0x1>;

#size-cells= <0x1>;

partition@qspi-fsbl-uboot{ </