【源码】Simscape中的电池组模型

用于热管理任务的电池组模型，具有串联和并联形式。

Battery pack model for thermal management tasks, with modules of cells in series and parallel.

此示例显示如何为热管理任务建模汽车电池组。

This example shows how to model an automotive battery pack for thermal management tasks.

电池组由多个电池模块组成，这些模块是串联和并联电池的组合。

The battery pack consists of several battery modules, which are combinations of cells in series and parallel.

每个电池单元都使用电池（基于表格）Simscape电气模块进行建模。

Each battery cell is modeled using the Battery (Table-Based) Simscape Electrical block.

在本例中，八个电池模块（一种类型的六个和另一种类型的两个）串联起来以模拟电池组。

In this example, eight battery modules, six of one type and two of another type, are connected in series to simulate a battery pack.

电池控制子系统定义逻辑以确定所施加电流负载所需的冷却（流速和冷却液温度）。

The Battery Controls subsystem defines the logic to determine the required cooling (flow rate and coolant temperature) for the applied current load.

打开文件Battery_Pack_Thermal_Management.prj开始使用。

Open Battery_Pack_Thermal_Management.prj to get started.

要了解有关Simscape的更多信息，请访问参考资料页以获取教程和示例：

To learn more about Simscape, visit the resources page for tutorials and examples:

https://www.mathworks.com/solutions/physical-modeling/resources.html

更多精彩文章请关注公众号：