main.c
/*!
\file main.c
\brief running LED
\version 2023-03-31, V1.0.0, firmware for GD32H7xx
*/
/*
Copyright (c) 2023, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its contributors
may be used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
*/
#include "gd32h7xx.h"
#include "systick.h"
#include "string.h"
#include "stdio.h"
/*!
\brief enable the CPU Chache
\param[in] none
\param[out] none
\retval none
*/
static void cache_enable(void)
{
/* Enable I-Cache */
// SCB_EnableICache();
/* Enable D-Cache */
// SCB_EnableDCache();
}
void led_config()
{
rcu_periph_clock_enable(RCU_GPIOJ);
gpio_mode_set(GPIOJ, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, GPIO_PIN_8);
gpio_output_options_set(GPIOJ, GPIO_OTYPE_PP, GPIO_OSPEED_60MHZ, GPIO_PIN_8);
gpio_mode_set(GPIOJ, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, GPIO_PIN_9);
gpio_output_options_set(GPIOJ, GPIO_OTYPE_PP, GPIO_OSPEED_60MHZ, GPIO_PIN_9);
gpio_bit_set(GPIOJ, GPIO_PIN_8);
gpio_bit_set(GPIOJ, GPIO_PIN_9);
}
void clock_config()
{
rcu_system_clock_source_config(RCU_CKSYSSRC_IRC64MDIV);
rcu_deinit();
rcu_osci_on(RCU_HXTAL); //开启外部时钟
rcu_osci_stab_wait(RCU_HXTAL); //等待外部时钟稳定 25MHZ
rcu_ahb_clock_config(RCU_AHB_CKSYS_DIV2); //AHB 300MHz
rcu_apb1_clock_config(RCU_APB1_CKAHB_DIV2); //APB1 150MHz
rcu_apb2_clock_config(RCU_APB2_CKAHB_DIV1); //APB2 300MHz
rcu_apb3_clock_config(RCU_APB3_CKAHB_DIV2); //APB3 150MHz
rcu_apb4_clock_config(RCU_APB4_CKAHB_DIV2); //APB4 150MHz
rcu_pll_source_config(RCU_PLLSRC_HXTAL); //选择外部高速时钟源 25MHz
rcu_pll0_config(1, 24, 1, 1, 1); //PLL0P 600MHz
rcu_pll_clock_output_enable(RCU_PLL0P | RCU_PLL0Q | RCU_PLL0R); //PLL0输出使能
RCU_CTL |= RCU_CTL_PLL0EN; //PLL0 使能
rcu_osci_stab_wait(RCU_PLL0_CK); //等待PLL0稳定
rcu_system_clock_source_config(RCU_CKSYSSRC_PLL0P); //CK_SYS 600MHz
SystemCoreClock = 600 * 1000 * 1000; //600MHz
}
void timer_config()
{
nvic_irq_enable(TIMER1_IRQn, 0,0);
timer_parameter_struct timer_initpara;
rcu_periph_clock_enable(RCU_TIMER1);
//AHB 300MHz -> 1Hz
timer_deinit(TIMER1);
timer_struct_para_init(&timer_initpara);
timer_initpara.prescaler = 3000 -1;
timer_initpara.alignedmode = TIMER_COUNTER_EDGE;
timer_initpara.counterdirection = TIMER_COUNTER_UP;
timer_initpara.period = (uint64_t)(100000-1);
timer_initpara.clockdivision = TIMER_CKDIV_DIV1;
timer_initpara.repetitioncounter = 0;
timer_init(TIMER1, &timer_initpara);
timer_interrupt_flag_clear(TIMER1, TIMER_INT_FLAG_UP);
timer_interrupt_enable(TIMER1, TIMER_INT_UP);
timer_enable(TIMER1);
}
void TIMER1_IRQHandler(void)
{
if(SET == timer_interrupt_flag_get(TIMER1, TIMER_INT_FLAG_UP)){
timer_interrupt_flag_clear(TIMER1, TIMER_INT_FLAG_UP);
gpio_bit_toggle(GPIOJ, GPIO_PIN_8);
}
}
/*!
\brief main function
\param[in] none
\param[out] none
\retval none
*/
int main(void)
{
/* enable the CPU Cache */
cache_enable();
clock_config(); //使用外部时钟
/* configure systick */
systick_config();
led_config();
timer_config();
while(1) {
delay_1ms(1000);
}
}