RK3568 CPU最高频率为2GHz的修改方法

RK3568 CPU最高频率为2GHz的修改方法

RK3568 CPU默认最高频率为1992MHz，如果要修改为2016MHz，可以按如下修改。
注意这里只是显示2016MHz，实际还是跑1992MHz。
kernel的版本是develop-4.19
kernel下面的补丁：

diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
index 5b744b2b5755..97c88f587615 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
@@ -206,8 +206,8 @@
 			opp-microvolt-L2 = <1050000 1050000 1150000>;
 			clock-latency-ns = <40000>;
 		};
-		opp-1992000000 {
-			opp-hz = /bits/ 64 <1992000000>;
+		opp-2016000000 {
+			opp-hz = /bits/ 64 <2016000000>;
 			opp-microvolt = <1150000 1150000 1150000>;
 			opp-microvolt-L0 = <1150000 1150000 1150000>;
 			opp-microvolt-L1 = <1100000 1100000 1150000>;
diff --git a/drivers/clk/clk-scmi.c b/drivers/clk/clk-scmi.c
index 7da2c01c4444..a129cf95e4c1 100644
--- a/drivers/clk/clk-scmi.c
+++ b/drivers/clk/clk-scmi.c
@@ -69,6 +69,9 @@ static int scmi_clk_set_rate(struct clk_hw *hw, unsigned long rate,
 {
 	struct scmi_clk *clk = to_scmi_clk(hw);
 
+	if ((clk->id == 0) && (rate == 2016000000))
+		rate = 1992000000;
+
 	return clk->handle->clk_ops->rate_set(clk->handle, clk->id, rate);
 }
 
@@ -129,6 +132,8 @@ static int scmi_clk_ops_init(struct device *dev, struct scmi_clk *sclk)
 		min_rate = sclk->info->range.min_rate;
 		max_rate = sclk->info->range.max_rate;
 	}
+	if (sclk->id == 0)
+		max_rate = 2016000000;
 
 	clk_hw_set_rate_range(&sclk->hw, min_rate, max_rate);
 	return ret;
--