入手--新唐NUC240与点亮OLED

入手–新唐NUC240与点亮OLED

一、SDK与烧录

1.SDK

新唐官网
可以在官网下载你所需要的SDK与pack。

2.烧录

首先下载官网自带模拟IIC的SDK。

打开代码，选择NUlink烧录。

二、代码修改

由于官网自带的是EEPRON的软件IIC，我们需要稍微修改一下。


EEPRON写入时序为sta(1 byte)+address(2 byte)+data(1 byte)
IIC写入时序为address(1 byte)+control(1 byte)+data(1 byte)

修改I2C_GPIO_Write_Byte()函数代码如下

void I2C_GPIO_Write_Byte(uint16_t u16Cmd, uint8_t u8Data)
{
    uint8_t u8Addr, u8cmd;

    u8Addr = u16Cmd >> 8;
    u8cmd = (uint8_t)u16Cmd;

    I2C_Start();
	
    I2C_Write(u8Addr);
	
	I2C_Write(u8cmd);
	
	I2C_Write(u8Data);
	
	I2C_Stop();
	
}

三、点亮OLED

//OLED初始化
void OLED_Init(void)
{		
		I2C_GPIO_Write_Byte(0x7800, 0xAE);
		I2C_GPIO_Write_Byte(0x7800, 0xD5);
		I2C_GPIO_Write_Byte(0x7800, 0x50);
		I2C_GPIO_Write_Byte(0x7800, 0xA8);
		I2C_GPIO_Write_Byte(0x7800, 0X3F);
		I2C_GPIO_Write_Byte(0x7800, 0xD3);
		I2C_GPIO_Write_Byte(0x7800, 0X00);
		I2C_GPIO_Write_Byte(0x7800, 0x40);
		I2C_GPIO_Write_Byte(0x7800, 0x8D);
		I2C_GPIO_Write_Byte(0x7800, 0x14);
		I2C_GPIO_Write_Byte(0x7800, 0x20);
		I2C_GPIO_Write_Byte(0x7800, 0x02);
		I2C_GPIO_Write_Byte(0x7800, 0xA0);
		I2C_GPIO_Write_Byte(0x7800, 0xC0);
		I2C_GPIO_Write_Byte(0x7800, 0xDA);
		I2C_GPIO_Write_Byte(0x7800, 0x12);
		I2C_GPIO_Write_Byte(0x7800, 0x81);
		I2C_GPIO_Write_Byte(0x7800, 0xEF);
		I2C_GPIO_Write_Byte(0x7800, 0xD9);
		I2C_GPIO_Write_Byte(0x7800, 0xf1);
		I2C_GPIO_Write_Byte(0x7800, 0xDB);
		I2C_GPIO_Write_Byte(0x7800, 0x30);
		I2C_GPIO_Write_Byte(0x7800, 0xA4);
		I2C_GPIO_Write_Byte(0x7800, 0xA6);
		I2C_GPIO_Write_Byte(0x7800, 0xAF);
		
		CLK_SysTickDelay(10000);//延时10MS
		
	    OLED_Clear();//清屏
}

//OLED Clear
void OLED_Clear(void)
{
      u8 i,n;
	  for(i=0;i<8;i++)
	  {
			  I2C_GPIO_Write_Byte(0x7800,0xb0+i);
			  I2C_GPIO_Write_Byte(0x7800,0x00);
			  I2C_GPIO_Write_Byte(0x7800,0x10);
			  for(n=0;n<128;n++)
			  {
				  I2C_GPIO_Write_Byte(0x7840,0x00);
			  }
	  }
}

//OLED Set pos
void OLED_Set_Pos(unsigned char x,unsigned char y)
{
      I2C_GPIO_Write_Byte(0x7800,0xb0+y);
	  I2C_GPIO_Write_Byte(0x7800,((x&0xf0)>>4)|0x10);
	  I2C_GPIO_Write_Byte(0x7800,(x&0x0f));
}	

//显示字符
void OLED_ShowChar(u8 x,u8 y,u8 string,u8 size)
{
        unsigned char data=0,i=0;
		data = string - ' ';//得到偏移后的值
		if(x>128-1) 
		{
				x = 0;
				y = y + 2;
		}
		if(size == 16)
		{
				OLED_Set_Pos(x,y);
				for(i=0; i<8; i++)
			      I2C_GPIO_Write_Byte(0x7840,F8X16[data*16+i]);
				OLED_Set_Pos(x,y+1);
				for(i=0; i<8; i++)
			      I2C_GPIO_Write_Byte(0x7840,F8X16[data*16+i+8]);
		}
		else 
		{
				OLED_Set_Pos(x,y);
				for(i=0; i<6; i++)
			      I2C_GPIO_Write_Byte(0x7840,F6x8[data][i]);
		}
}

//显示字符串
void OLED_ShowString(u8 x,u8 y,u8* string,u8 size)
{
      unsigned char i=0;
	  while(string[i]!='\0')
		{
		    OLED_ShowChar(x,y,string[i],size);
			  x+=8;
			  if(x > 120)//大于一行
				{
				    x=0;
					y+=2;
				}
				i++;
		}
}	

//main添加初始化
    OLED_Init();
	
	OLED_ShowString(1,1,"Hello World",16);

将代码烧录到MCU
效果如下