kail-linux如何使用NAT连接修改静态IP

1、Contos修改静态IP

vi /etc/sysconfig/network-scripts/ifcfg-ens33， 标记红色处可能序号会变动

参考linux配置网络不通解决方案_kylinv10sp2 网关不通-CSDN博客https://tanrt06.blog.csdn.net/article/details/132430485?spm=1001.2014.3001.5502

 Kail时候NAT连接如何修改静态IP

百度后/etc/network/interfaces修改静态ip，修改后不生效

最终解决办法

nmcli NetworkManager 的命来配置网络接口生效

查看 相当于cat

nmcli device show
 

IP静态地址更新

sudo nmcli con mod "Wired connection 1" ipv4.addresses "192.168.203.11/24"

网关设置

sudo nmcli con mod "Wired connection 1" ipv4.gateway "192.168.203.1"

DNS设置

sudo nmcli con mod "Wired connection 1" ipv4.dns "8.8.8.8 8.8.4.4"

设置 IP 配置方法为手动

sudo nmcli con mod "Wired connection 1" ipv4.method manual

关闭

sudo nmcli con down "Wired connection 1"

重新激活

sudo nmcli con up "Wired connection 1"