weixin_43397981的博客

原创 树莓派CSI摄像头使用

如图接好摄像头进入树莓派系统，打开终端输入sudo raspi-config（开启摄像头）测试摄像头raspistill -v -o test.jpg安装摄像头软件sudo apt-get upgradesudo apt install motionsudo nano /etc/motion/motion.conf(配置相关文件)#根据情况，更改配置文件内容stream_port 8081 (看端口)stream_localhost off(no改为off)width（Im.