CCS烧录问题记录
CCS烧录问题记录 28335
CCS报错
C28xx: GEL Output:
ADC Calibration not complete, check if device is unlocked and recalibrate.C28xx: Flash Programmer: Warning: The configured device (TMS320F28335), does not match the detected device (). Flash Programming operations could be affected. Please consider modifying your target configuration file.
C28xx: GEL Output:
ADC Calibration not complete, check if device is unlocked and recalibrate.C28xx: File Loader: Verification failed: Values at address 0x08016@Program do not match Please verify target memory and memory map.
C28xx: GEL: File: G:\windPowerProject\code\Project\Example_2833xCpuTimer\Debug\Example_2833xCpuTimer.out: a data verification error occurred, file load failed.
解决方法
电源部分
首先查看图中VDD3VFL 该引脚是否有3.3V 供电,该引脚不供电,导致闪存不供电,烧录过程中ADC校验不工作,ADC Calibration not complete,校验不通过。
JTAG口
EMU1引脚需接入Vcc3.3电压