大数据之Flume：Flume企业开发案例之聚合

1）案例需求：
hadoop101上的Flume-1监控文件/opt/module/group.log，
hadoop102上的Flume-2监控某一个端口的数据流，
Flume-1与Flume-2将数据发送给hadoop103上的Flume-3，Flume-3将最终数据打印到控制台。
2）需求分析

3）实现步骤：
0.准备工作
分发Flume
[hadoop@hadoop101 module]$ xsync flume
在hadoop101、hadoop102以及hadoop103的/opt/module/flume/job目录下创建一个group3文件夹。
[hadoop@hadoop101 job]$ mkdir group3
[hadoop@hadoop102 job]$ mkdir group3
[hadoop@hadoop103 job]$ mkdir group3
1.创建flume1-logger-flume.conf
配置Source用于监控hive.log文件，配置Sink输出数据到下一级Flume。
在hadoop101上编辑配置文件
[hadoop@hadoop101 group3]$ vim flume1-logger-flume.conf
添加如下内容

# Name the components on this agent
a1.sources = r1
a1.sinks = k1
a1.channels = c1

# Describe/configure the source
a1.sources.r1.type = exec
a1.sources.r1.command = tail -F /opt/module/group.log
a1.sources.r1.shell = /bin/bash -c

# Describe the sink
a1.sinks.k1.type = avro
a1.sinks.k1.hostname = hadoop103
a1.sinks.k1.port = 4141

# Describe the channel
a1.channels.c1.type = memory
a1.channels.c1.capacity = 10000
a1.channels.c1.transactionCapacity = 1000

# Bind the source and sink to the channel
a1.sources.r1.channels = c1
a1.sinks.k1.channel = c1

2.创建flume2-netcat-flume.conf
配置Source监控端口44444数据流，配置Sink数据到下一级Flume：
在hadoop102上编辑配置文件
[hadoop@hadoop102 group3]$ vim flume2-netcat-flume.conf
添加如下内容

# Name the components on this agent
a2.sources = r1
a2.sinks = k1
a2.channels = c1

# Describe/configure the source
a2.sources.r1.type = netcat
a2.sources.r1.bind = hadoop102
a2.sources.r1.port = 44444

# Describe the sink
a2.sinks.k1.type = avro
a2.sinks.k1.hostname = hadoop103
a2.sinks.k1.port = 4141

# Use a channel which buffers events in memory
a2.channels.c1.type = memory
a2.channels.c1.capacity = 10000
a2.channels.c1.transactionCapacity = 1000

# Bind the source and sink to the channel
a2.sources.r1.channels = c1
a2.sinks.k1.channel = c1

3.创建flume3-flume-logger.conf
配置source用于接收flume1与flume2发送过来的数据流，最终合并后sink到控制台。
在hadoop103上编辑配置文件
[hadoop@hadoop103 group3]$ touch flume3-flume-logger.conf
[hadoop@hadoop103 group3]$ vim flume3-flume-logger.conf
添加如下内容

# Name the components on this agent
a3.sources = r1
a3.sinks = k1
a3.channels = c1

# Describe/configure the source
a3.sources.r1.type = avro
a3.sources.r1.bind = hadoop103
a3.sources.r1.port = 4141

# Describe the sink
# Describe the sink
a3.sinks.k1.type = logger

# Describe the channel
a3.channels.c1.type = memory
a3.channels.c1.capacity = 10000
a3.channels.c1.transactionCapacity = 1000

# Bind the source and sink to the channel
a3.sources.r1.channels = c1
a3.sinks.k1.channel = c1

4.执行配置文件
分别开启对应配置文件：flume3-flume-logger.conf，flume2-netcat-flume.conf，flume1-logger-flume.conf。

[hadoop@hadoop103 flume]$ bin/flume-ng agent -c conf/ -n a3 -f  job/group3/flume3-flume-logger.conf -Dflume.root.logger=INFO,console

[hadoop@hadoop101 flume]$ bin/flume-ng agent -c conf/ -n a1 -f job/group3/flume1-logger-flume.conf

[hadoop@hadoop102 flume]$ bin/flume-ng agent -c conf/ -n a2 -f job/group3/flume2-netcat-flume.conf

5．在hadoop102上向/opt/module目录下的group.log追加内容

[hadoop@hadoop101 module]$ echo 'hello' > group.log

6．在hadoop101上向44444端口发送数据

[hadoop@hadoop102 flume]$ nc hadoop102 44444

7.检查hadoop103上数据