LTE射频测试中的NS

最新推荐文章于 2024-06-27 15:29:49 发布
最新推荐文章于 2024-06-27 15:29:49 发布
阅读量1.4k 收藏 10
点赞数 1
分类专栏： 蜂窝 文章标签： 射频工程
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/weixin_43668678/article/details/127111377
版权

NS=Network Signalling value
NS 同测试频段，信道带宽和RB 占用有固定的关系。详细的关系定义在测试规范TS 36.521, 表 6.2.4.3-1 中
请添加图片描述

NS_01
Requirements (sub-clause)6.6.2.1.1
请添加图片描述
E-UTRA Band Table 5.2-1

Channel bandwidth (MHz) 1.4,3,5,10,1 5,20
Resources Blocks (NRB) Table 5.4.2-1
在这里插入图片描述

调射频的猫
关注
  • 1
    点赞
  • 踩
  • 10
    收藏
    觉得还不错? 一键收藏
  • 1
    评论
专栏目录
利用NS3部署一个LTE网络
Shmily1107的博客
12-09 4706
网络通信实现技术——实验三 实验内容 利用NS3部署一个LTE网络，具体参数如表所示 绘制仿真的Radio Environment Map 实验目的 理解无线蜂窝网络基本概念 实验环境 操作系统 Linux Ubuntu 7.5.0 网络仿真软件 NS3-3.29 绘图软件 gnuplot 实验步骤 在src/lte/examples中找到lena-dual-stripe.cc示例程序源码，这个示例程序中包含了很多源码，根据这个修改即可 一、小区拓扑：正六边形，7个小区，21个扇形，基站间距500m ns
ns-3 lte模块详细介绍文档
06-08
详细讲述了ns3 中lte模块的各个细节，十分有用
TD-LTE无线射频标准
10-31
Contents Intellectual Property Rights ................................................................................................................................ 2 Foreword ............................................................................................................................................................. 2 Foreword ........................................................................................................................................................... 13 1 Scope ...................................................................................................................................................... 14 2 References .............................................................................................................................................. 14 3 Definitions, symbols and abbreviations ................................................................................................. 14 3.1 Definitions ........................................................................................................................................................ 14 3.2 Symbols ............................................................................................................................................................ 15 3.3 Abbreviations ................................................................................................................................................... 17 4 General ................................................................................................................................................... 18 4.1 Relationship between minimum requirements and test requirements .............................................................. 18 4.2 Applicability of minimum requirements ......................................................................................................... 18 4.3 Void .................................................................................................................................................................. 18 4.3A Applicability of minimum requirements (CA, UL-MIMO, eDL-MIMO) ........................................................ 18 4.4 RF requirements in later releases ..................................................................................................................... 19 5 Operating bands and channel arrangement ............................................................................................. 19 5.1 General ............................................................................................................................................................. 19 5.2 Void .................................................................................................................................................................. 19 5.3 Void .................................................................................................................................................................. 19 5.4 Void .................................................................................................................................................................. 19 5.5 Operating bands ................................................................................................................................................ 19 5.5A Operating bands for CA ................................................................................................................................... 20 5.5B Operating bands for UL-MIMO ....................................................................................................................... 21 5.6 Channel bandwidth ........................................................................................................................................... 21 5.6.1 Channel bandwidths per operating band ..................................................................................................... 22 5.6A Channel bandwidth for CA ............................................................................................................................... 23 5.6A.1 Channel bandwidths per operating band for CA ......................................................................................... 25 5.6B Channel bandwidth for UL-MIMO .................................................................................................................. 25 5.6B.1 Void ............................................................................................................................................................ 26 5.7 Channel arrangement ........................................................................................................................................ 26 5.7.1 Channel spacing .......................................................................................................................................... 26 5.7.1A Channel spacing for CA .............................................................................................................................. 26 5.7.2 Channel raster ............................................................................................................................................. 26 5.7.2A Channel raster for CA ................................................................................................................................. 26 5.7.3 Carrier frequency and EARFCN ................................................................................................................. 26 5.7.4 TX–RX frequency separation ..................................................................................................................... 27 5.7.4A TX–RX frequency separation for CA ......................................................................................................... 28 6 Transmitter characteristics ..................................................................................................................... 28 6.1 General ............................................................................................................................................................. 28 6.2 Transmit power ................................................................................................................................................ 28 6.2.1 Void ............................................................................................................................................................ 28 6.2.2 UE maximum output power ........................................................................................................................ 28 6.2.2A UE maximum output power for CA ............................................................................................................ 29 6.2.2B UE maximum output power for UL-MIMO ............................................................................................... 30 6.2.3 UE maximum output power for modulation / channel bandwidth .............................................................. 31 6.2.3A UE Maximum Output power for modulation / channel bandwidth for CA ................................................ 32 6.2.3B UE maximum output power for modulation / channel bandwidth for UL-MIMO ..................................... 33 6.2.4 UE maximum output power with additional requirements ......................................................................... 33 6.2.4A UE maximum output power with additional requirements for CA ............................................................. 35 6.2.4A.1 A-MPR for CA_NS_01 for CA_1C ...................................................................................................... 35 6.2.4A.2 A-MPR for CA_NS_02 for CA_1C ...................................................................................................... 36 6.2.4A.3 A-MPR for CA_NS_03 for CA_1C ...................................................................................................... 36 6.2.4B UE maximum output power with additional requirements for UL-MIMO ................................................. 36 6.2.5 Configured transmitted power .................................................................................................................... 37 6.2.5A Configured transmitted power for CA ........................................................................................................ 37 6.2.5B Configured transmitted power for UL-MIMO ............................................................................................ 40 6.3 Output power dynamics .................................................................................................................................... 41 6.3.1 (Void) .......................................................................................................................................................... 41 6.3.2 Minimum output power .............................................................................................................................. 41 6.3.2.1 Minimum requirement .......................................................................................................................... 41 6.3.2A UE Minimum output power for CA ............................................................................................................ 41 6.3.2A.1 Minimum requirement for CA .............................................................................................................. 41 6.3.2 UE Minimum output power for UL-MIMO ............................................................................................... 42 6.3.2B.1 Minimum requirement .......................................................................................................................... 42 6.3.3 Transmit OFF power ................................................................................................................................... 42 6.3.3.1. Minimum requirement .......................................................................................................................... 42 6.3.3A UE Transmit OFF power for CA ................................................................................................................ 43 6.3.3A.1 Minimum requirement for CA .............................................................................................................. 43 6.3.3B UE Transmit OFF power for UL-MIMO .................................................................................................... 43 6.3.3B.1 Minimum requirement .......................................................................................................................... 43 6.3.4 ON/OFF time mask ..................................................................................................................................... 43 6.3.4.1 General ON/OFF time mask ................................................................................................................. 43 6.3.4.2 PRACH and SRS time mask ................................................................................................................. 44 6.3.4.2.1 PRACH time mask .......................................................................................................................... 44 6.3.4.2.2 SRS time mask ................................................................................................................................ 44 6.3.4.3 Slot / Sub frame boundary time mask ................................................................................................... 45 6.3.4.4 PUCCH / PUSCH / SRS time mask ...................................................................................................... 46 6.3.4A ON/OFF time mask for CA ........................................................................................................................ 47 6.3.4B ON/OFF time mask for UL-MIMO ............................................................................................................ 47 6.3.5 Power Control ............................................................................................................................................. 47 6.3.5.1 Absolute power tolerance ...................................................................................................................... 47 6.3.5.1.1 Minimum requirements ................................................................................................................... 47 6.3.5.2 Relative Power tolerance ....................................................................................................................... 48 6.3.5.2.1 Minimum requirements ................................................................................................................... 48 6.3.5.3 Aggregate power control tolerance ....................................................................................................... 49 6.3.5.3.1 Minimum requirement ..................................................................................................................... 49 6.3.5A Power control for CA .................................................................................................................................. 49 6.3.5A.1 Absolute power tolerance ...................................................................................................................... 49 6.3.5A.1.1 Minimum requirements ................................................................................................................... 49 6.3.5A.2 Relative power tolerance ....................................................................................................................... 50 6.3.5A.2.1 Minimum requirements ................................................................................................................... 50 6.3.5A.3 Aggregate power control tolerance ....................................................................................................... 50 6.3.5A.3.1 Minimum requirements ................................................................................................................... 50 6.3.5B Power control for UL-MIMO ..................................................................................................................... 50 6.4 Void .................................................................................................................................................................. 51 6.5 Transmit signal quality ..................................................................................................................................... 51 6.5.1 Frequency error ........................................................................................................................................... 51 6.5.1A Frequency error for CA ............................................................................................................................... 51 6.5.1B Frequency error for UL-MIMO .................................................................................................................. 51 6.5.2 Transmit modulation quality ....................................................................................................................... 51 6.5.2.1 Error Vector Magnitude ........................................................................................................................ 51 6.5.2.1.1 Minimum requirement ..................................................................................................................... 52 6.5.2.2 Carrier leakage ...................................................................................................................................... 52 6.5.2.2.1 Minimum requirements ................................................................................................................... 52 6.5.2.3 In-band emissions ................................................................................................................................. 52 6.5.2.3.1 Minimum requirements ................................................................................................................... 52 6.5.2.4 EVM equalizer spectrum flatness ......................................................................................................... 53 6.5.2.4.1 Minimum requirements ................................................................................................................... 53 6.5.2A Transmit modulation quality for CA ........................................................................................................... 54 6.5.2A.1 Error Vector Magnitude ........................................................................................................................ 54 6.5.2A.2 Carrier leakage for CA .......................................................................................................................... 55 6.5.2A.2.1 Minimum requirements ................................................................................................................... 55 6.5.2A.3 In-band emissions ................................................................................................................................. 55 6.5.2A.3.1 Minimum requirement for CA ....................
NR通信学习协议解读(R18)——RF最大发射功率
最新发布
weixin_43152775的博客
06-27 1021
通信协议最大发射功率范围解读：最大输出功率上界是23db（也就是不回退），下界主要是由mp和ampr决定的。MPR是由rb数，调制方式、band，帧配置决定的。对于固定class3，mpr仅取决于调制方式和rb。对于只考虑class3 mpr的简单情况，最大输出功率可以计算为 P =23-MPR，具体的mpr取值取决于RF实际性能情况。
NSValue的详解
isfly_cool的专栏
05-27 856
转载▼ 一个NSValue对象是用来存储一个C或者Objective－C数据的简单容器。它可以保存任意类型的数据，比如int，float，char，当然也可以是指pointers, structures, and object ids。NSValue类的目标就是允许以上数据类型的数据结构能够被添加到集合里，例如那些需要其元素是对象的数据结构，如NSArray或者NSSet的实例。需要
ns-3-manual_ns3_
10-01
在ns-3中，你可以模拟各种网络环境，包括无线网络（如Wi-Fi、WiMAX、LTE）、移动网络（如UMTS、4G、5G）、互联网基础设施以及各种应用层协议。以下是一些主要知识点的详细解释： 1. **网络架构**：ns-3模拟器基于...
电子测量中的Linear推出宽动态范围均方射频检测器
11-28
凌力尔特（Linear Technology）推出的LT5570是一款创新的宽动态范围均方射频（RF）检测器，专为应对电子测量领域中日益复杂的无线通信标准挑战而设计。这款检测器在60dB的动态范围内，能够对40MHz至2.7GHz的交流信号...
RFID技术中的Linear推出2.7GHz宽动态范围均方射频检测器
11-29
总结来说，LT5570是针对现代无线通信标准如WiMAX和LTE中高阶调制需求而开发的一款高性能射频检测器。它以出色的动态范围、准确度、速度和温度稳定性，以及紧凑的封装，满足了日益复杂无线环境下的功率测量挑战，是...
LTE射频标准 3GPP TS 36.521-13 V11.1.0 (2013-06) Word版
08-24
LTE 射频标准 3GPP TS 36.521-13 V11.1.0 (2013-06) 3rd Generation Partnership Project; Technical Specification Group Radio Access Network; Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment (UE) conformance specification Radio transmission and reception Part 1: Conformance Testing; (Release 11)
LTE 3GPP射频规范
08-07
LTE 3GPP射频规范 3rd Generation Partnership Project; Technical Specification Group Radio Access Network; Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment (UE) radio transmission and reception
RFID技术中的凌力尔特推出宽动态范围均方射频检测器
11-29
凌力尔特公司 (Linear Technology Corporation) 新推出的宽动态范围均方射频检测器将准确度和速度性能提高到一个新的水平。LT5570 在 60dB 动态范围内对 40MHz 至 2.7GHz 的交流信号进行准确的均方根 (RMS) 功率测量...
3GPP接口定义及相关协议一, 手机通信专有名词中英文对照
热门推荐
Wenxy's computer science technology blog
08-21 1万+
1 3GPP接口定义及相关协议一览Controlling Radio Network Controller (CRNC)A role an RNC can take with respect to a specific set of Node B’s. This represents the RNC functions that deal with control of subtending No
LTE网络优化笔记
TXNMG的博客
10-28 4158
SRS是探测参考信号的缩写，所谓参考信号，那么是为谁提供参考？参考的指标是什么？答案是为eNodeB的调度提供参考，参考的内容是为上行信道质量做参考。那么为什么需要SRS呢？众所周知，在LTE网络中，eNodeB通常是分配系统带宽的一部分区域给特定的UE，也就是在一个特定时间、给UE分配特定的频率区域资源，此时若eNodeB知道哪一部分特定频率区域质量较好，优先分配给UE将使UE的业务质量更有保障；当然，若eNodeB每次都把整个系统带宽分配给UE，那么SRS的参考意义就不重要了，所以SRS是一个可选的参考
3GPP-LTE Band13标准定义频点和信道（V17.3.0 (2022-09)
勤奋的伟哥哥的博客
03-21 222
Low Range5 23205779.55205748.510 232307825230751Mid Range7825230751High Range5 23255784.55255753.510 232307825230751。
有关RF的一些缩写
学习笔记
07-20 2037
ACLR Adjacent Channel Leakage Ratio AWGN Additive White Gaussian Noise CQI Channel Quality Indicator DL Downlink E-UMTS Evolved UMTS Terrestrial Radio Access EVM Error Vector Magnitude FDD Frequ...
评论 1
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值