CISCO设备如何执行TCL脚本

在CISCO设备类型及版本支持tc的情况下，通过tclsh命令运行，比如：
C3750#tclsh tftp://192.168.1.1/TCLtest.tcl
Loading TCLtest.tcl from 192.168.1.1 (via Vlan1): !
[OK - 287 bytes]

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.1.1, timeout is 2 seconds:
!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/9 ms

Variables loaded. Interfaces are valid. Let’s get started!
First some global stuff…
Reloading the switch in 1 minute, type reload cancel to halt—it’s not real
这里用到的脚本文件TCLtest.tcl内容如下;
ping 192.168.1.1

puts “\n”
puts “Variables loaded. Interfaces are valid. Let’s get started!”
puts “First some global stuff…”

puts “Reloading the switch in 1 minute, type reload cancel to halt—it’s not real”