SSD28

Features
Support up to total of 4Gbps over the serial link
Support up to 4 data lanes
Number of signals is significantly reduced when compare to traditional RGB transfer
Support up to 1920 pixels per display row in Video mode, up to 60hz refresh rate
Support up to 2560 pixels per display row in Video mode, up to 30hz refresh rate
Reduce power consumption and decrease EMI by using low amplitude signal over differential pair for serial data.
Support parallel RGB interface (DPI 2.0) up to 24-bits
Support serial SPI interface (DBI 2.0) up to 16-bits
Support both command mode and video mode in MIPI DSI standard
Support 16, 18 and 24-bit per pixel in Raw or Pixel mode for command mode transfer
Support independent bi-directional data transfer (forward link in High Speed and Low Power mode and reverse link in Low Power mode) for each DSI
Support Ultra low power mode in idle state for each DSI
Support CABC function for Video mode
On-chip PLL with variable output frequency
MIPI analog and digital power supply: (MDVDD and MAVDD) 1.2V +/-10%
IO Power supply: (VDDIO) 1.8 ~ 3.3V +/-10%
Support of MIPI standard DSI(v1.01.00), DCS(v1.02.00), D-PHY (v1.00.00)
Ordering Information