DSP
文章平均质量分 79
big pineapple
程序工人,但是又偏爱理财,又苦于没有多少时间。
想要交流的或者有兴趣的可以关注我的公众号:大菠萝屋
展开
-
DSP 串口报错frame error,怎么处理
这3天接了一个维护的活儿,发现对方的串口转光部分,上下电会引起DSP里的串口接收数据报错:SCIRXBUF_BITS结构Uint16 SCIFFPE:1; // 14 Receiver error flag Uint16 SCIFFFE:1; // 15 Receiver error flag 就是这俩货报错。于是网上慢慢求索:方法有三:1、重启串口接收部分。2、重启串口外围设备。3、重启DSP,杀看门狗。按照需求原创 2020-10-30 10:01:58 · 3514 阅读 · 3 评论 -
This error is generated by TI‘s USCIF driver or utilities
昨天神奇的使用DSP来刚9针的调试线,死活都提示这个玩意:This error is generated by TI’s USCIF driver or utilities于是乎,吭哧吭哧的按照PCB线路图接起来,怎么都不对呢?what’s wrong?大大的黑人问号。再看看xds2000:经过不断的努力:RTCK + TCK 连接在一起DIS + GND 连接在一起这样就OK了,希望能解惑一些类似的情况。...原创 2020-10-21 15:59:26 · 6772 阅读 · 2 评论 -
creating output section “HRCap1RegsFile“ without a SECTIONS
CCS编译的时候,类似出现这种creating output section “xxx” without a SECTIONS的提示,只需要两个步骤:1、是否添加对应型号的DSP2803x_Headers_nonBIOS.cmd文件?2、添加的DSP2803x_GlobalVariableDefs.c文件是否和上面的CMD文件版本一一对应?比如ti\controlSUITE\device_support\f2803x*v130*\DSP2803x_headers\source解决完毕,下课。...原创 2020-10-13 10:19:25 · 1108 阅读 · 2 评论 -
After trying to increase PLL frequency, system shows the error: “Device may be operating in low-powe
今天为了测试同事压的数据线在DSP的调试器下是否可以使用找了一块板子,开始干活,确遇到这个提示:After trying to increase PLL frequency, system shows the error: “Device may be operating in low-power mode. The debugger has forced the device to wake up.”, and never connects想了想,这个板子使用的程序DSP的芯片不匹配,结果换成板子匹配的原创 2020-10-08 16:48:56 · 2201 阅读 · 0 评论 -
Error initializing emulator: The XDS200 update cannot work if more than one XDS2xx probe is attached
更换成2020年的新版本CCS,再次去调试DSP程序的时候报错:Error initializing emulator: The XDS200 update cannot work if more than one XDS2xx probe is attached.此时选择update继续,得到另外的提示:Error initializing emulator:The XDS200 update cannot work if more than one XDS2xx probe is attache原创 2020-10-08 16:46:46 · 3503 阅读 · 1 评论 -
解决ccs在c2000下 报错program will not fit into available memory.
报错program will not fit into available memory.修改编译优化,见下图:原创 2020-08-17 16:03:45 · 3339 阅读 · 0 评论