华为Ensp Gvrp的三种注册模式

GVRP的端口的三种注册模式

1. Normal模式：允许该端口动态注册或注销VLAN，传播动态VLAN和静态VLAN信息。
2. Fixed模式：禁止该端口动态注册或注销VLAN，只传播静态VLAN信息，不传播动态VLAN信息。也就是说被设置为Fixed模式的Trunk口，即使允许所有VLAN通过，实际能通过的VLAN也只是手动配置的静态VLAN。
3. Forbidden模式：禁止该端口动态注册或注销VLAN，不传播除VLAN１之外的任何VLAN信息。也就是说被设置为Forbidden模式的Trunk口，即使允许所有VLAN通过，实际能通过的VLAN也只是VLAN1。

默认GVRP工作在Normal模式
SW-1配置

[SW-1]gvrp   #开启全局gvrp
[SW-1]vlan batch 2 to 5 #创建vlan 2，3，4，5
Info: This operation may take a few seconds. Please wait for a moment...done.
[SW-1]interface GigabitEthernet0/0/1
[SW-1-GigabitEthernet0/0/1]port link-type trunk
[SW-1-GigabitEthernet0/0/1]port trunk allow-pass vlan 2 to 5
[SW-1-GigabitEthernet0/0/1]gvrp
[SW-1-GigabitEthernet0/0/1]

SW-2配置

[Huawei]sysname SW-2
[SW-2]gvrp
[SW-2]interface GigabitEthernet0/0/1
[SW-2-GigabitEthernet0/0/1]port link-type trunk
[SW-2-GigabitEthernet0/0/1]port trunk allow-pass vlan 2 to 5
[SW-2-GigabitEthernet0/0/1]gvrp
[SW-2-GigabitEthernet0/0/1]quit

SW-3配置

[Huawei]sysname SW-3
[SW-3]gvrp
[SW-3]interface GigabitEthernet0/0/1
[SW-3-GigabitEthernet0/0/1]port link-type trunk
[SW-3-GigabitEthernet0/0/1]port trunk allow-pass vlan 2 to 5
[SW-3-GigabitEthernet0/0/1]gvrp
[SW-3-GigabitEthernet0/0/1]quit

端口配置成其他注册模式的命令

[SW-1]interface GigabitEthernet0/0/1
[SW-1-GigabitEthernet0/0/1]gvrp
[SW-1-GigabitEthernet0/0/1]gvrp registration fixed
[SW-1-GigabitEthernet0/0/1]gvrp registration forbidden