Mixly遥控调光器实验三

Mixly遥控调光器

组块化编程

下面直接上代码

#include <IRremote.h>
//定义好变量
volatile int LED;
IRrecv irrecv_5(5);
decode_results results_5;
long ir_item;
volatile boolean ledstate;`

void setup(){
  Serial.begin(9600);
  irrecv_5.enableIRIn();
  pinMode(10, OUTPUT);
  LED = 0;
  ledstate = 0;
}

void loop(){
  if (irrecv_5.decode(&results_5)) {
    ir_item=results_5.value;
    String type="UNKNOWN";
    String typelist[14]={"UNKNOWN", "NEC", "SONY", "RC5", "RC6", "DISH", "SHARP", "PANASONIC", "JVC", "SANYO", "MITSUBISHI", "SAMSUNG", "LG", "WHYNTER"};
    if(results_5.decode_type>=1&&results_5.decode_type<=13){
      type=typelist[results_5.decode_type];
    }
    Serial.print("IR TYPE:"+type+"  ");
    Serial.println(ir_item,HEX);
    irrecv_5.resume();
  } else {
  }
  if (ir_item == 0xFF629D) {
    digitalWrite(10,(!digitalRead(10)));
  }

if (ir_item == 0xFF629D) {
    ledstate = !ledstate;
    LED = ledstate * 128;

  }
  if (LED != 0 && ir_item == 0xFFE21D) {
    LED = constrain(LED, 1, 255);
    LED = LED - 50;

  }
  if (LED != 0 && ir_item == 0xFFA25D) {
    LED = constrain(LED, 1, 255);
    LED = LED + 50;

  }
  analogWrite(10,LED);

}

下面给出组块的拼接