MicroPython+ESP32 C3+ST7735S LCD屏 WIFI联网显示实时时间

whltaoin

于 2024-06-20 21:43:30 发布

阅读量706

点赞数 20

分类专栏：物联技术笔记文章标签：物联网嵌入式硬件 python

本文链接：https://blog.csdn.net/weixin_45793745/article/details/139843207

版权

笔记同时被 2 个专栏收录

19 篇文章 4 订阅

订阅专栏

物联技术

2 篇文章 0 订阅

订阅专栏

案例地址：https://gitee.com/whltaoin_admin/MP_ESP32_ST7735S-

展示效果

ESP32+LCD屏 WIFI联网并显示实时时间

TFT LCD模块参数介绍

名称：1.8 128*160 RGB_TFT
驱动芯片：ST7735S

ESP32 C3 参数介绍（经典款）

外观及引脚分布

接线

LCD屏接口	功能	ESP32 C3 对应连接引脚
GND	电源（接地）	GND
VCC	电源（正极3.3V）	3.3V
SCL	SPI时钟线（与单片机SPI_CLK对接）	IO02
SDA	SPI数据线（与单片机SPI_MOSI对接）	IO03
RES	复位	IO10
DC	数据/命令	IO06
CS	SPI片选	IO07
BL	背光控制开发，默认可不接	IO08

项目初始化

一、项目结构

boot.py：用于连接WIFI,打印初始化信息等。
font.bmf: 文字库
st7735.py: ST7735驱动
test.py: 测试效果文件
ufont.py: 字体文件

二、st7735.py

"""
使用方法(以合宙ESP32C3为例):
    from machine import SPI, Pin
    from st7735 import ST7735
    spi = SPI(1, 30000000, sck=Pin(2), mosi=Pin(3))
    ST7735(spi, rst=10, dc=6, cs=7, bl=11, width=160, height=80, rotate=1)  # 直插横屏显示
    ST7735(spi, rst=10, dc=6, cs=7, bl=11, width=160, height=80, rotate=0)  # 直插竖屏显示
"""
import gc
import time
import math

import machine
import framebuf
from micropython import const

SWRESET = const(0x01)
SLPOUT = const(0x11)
NORON = const(0x13)

INVOFF = const(0x20)
DISPON = const(0x29)
CASET = const(0x2A)
RASET = const(0x2B)
RAMWR = const(0x2C)

MADCTL = const(0x36)
COLMOD = const(0x3A)

FRMCTR1 = const(0xB1)
FRMCTR2 = const(0xB2)
FRMCTR3 = const(0xB3)

INVCTR = const(0xB4)

PWCTR1 = const(0xC0)
PWCTR2 = const(0xC1)
PWCTR3 = const(0xC2)
PWCTR4 = const(0xC3)
PWCTR5 = const(0xC4)
VMCTR1 = const(0xC5)

GMCTRP1 = const(0xE0)
GMCTRN1 = const(0xE1)

ROTATIONS = [0x00,0x60]  # 只给了两个旋转方向


def color(r, g, b):
    i = (((b & 0xF8) << 8) | ((g & 0xFC) << 3) | (r >> 3)).to_bytes(2, "little")
    return (i[0] << 8) + i[1]

RED = color(255, 0, 0)
GREEN = color(0, 255, 0)
BLUE = color(0, 0, 255)
WHITE = color(255, 255, 255)
BLACK = color(0, 0, 0)


class ST7735(framebuf.FrameBuffer):
    def __init__(self, spi, rst, dc, cs, bl=None, width=None, height=None, offset=None, rotate=1, rgb=True):
        """
        :param spi:
        :param rst:
        :param dc:
        :param cs: 使能
        :param bl: 背光
        :param width: 宽度
        :param height: 高度
        :param offset: 偏移 (x, y): (23, -1)|(-1, 23)
        :param rotate: 旋转 0 横屏 1 竖屏
        :param rgb: RGB 色彩模式
        """
        # 根据方向自动设置偏移
        self.rotate = rotate
        self.offset = offset
        self.rgb = rgb
        if offset is None and rotate == 1:
            self.offset = (-1, 23)
        elif offset is None and rotate == 0:
            self.offset = (23, -1)
        self.width = width
        self.height = height

        self.spi = spi
        self.rst = machine.Pin(rst, machine.Pin.OUT, machine.Pin.PULL_DOWN)
        self.dc = machine.Pin(dc, machine.Pin.OUT, machine.Pin.PULL_DOWN)
        self.cs = machine.Pin(cs, machine.Pin.OUT, machine.Pin.PULL_DOWN)
        if bl is not None:
            self.bl = machine.PWM(machine.Pin(bl))

        gc.collect()
        self.buffer = bytearray(self.height * self.width * 2)
        super().__init__(self.buffer, self.width, self.height, framebuf.RGB565)
        self.init()
        self.set_windows()
        self.clear()

    def set_windows(self, x_start=None, y_start=None, x_end=None, y_end=None):
        """
        设置窗口
        :return:
        """
        x_start = (x_start + self.offset[0] + 1) if x_start is not None else (self.offset[0] + 1)
        x_end = x_end + self.rotate + self.offset[0] if x_end is not None else self.width + self.rotate + \
                                                                               self.offset[0]
        y_start = y_start + self.offset[1] + 1 if y_start is not None else self.offset[1] + 1
        y_end = y_end + self.rotate + self.offset[1] if y_end is not None else self.height + self.rotate + \
                                                                               self.offset[1]
 
        self.write_cmd(CASET)
        self.write_data(bytearray([0x00, x_start, 0x00, x_end]))
 
        self.write_cmd(RASET)
        self.write_data(bytearray([0x00, y_start, 0x00, y_end]))
 
        self.write_cmd(RAMWR)
 
    def init(self):
        self.reset()
 
        self.write_cmd(SWRESET)
        time.sleep_us(150)
        self.write_cmd(SLPOUT)
        time.sleep_us(300)
 
        self.write_cmd(FRMCTR1)
        self.write_data(bytearray([0x01, 0x2C, 0x2D]))
        self.write_cmd(FRMCTR2)
        self.write_data(bytearray([0x01, 0x2C, 0x2D]))
        self.write_cmd(FRMCTR3)
        self.write_data(bytearray([0x01, 0x2C, 0x2D, 0x01, 0x2C, 0x2D]))
        time.sleep_us(10)
 
        self.write_cmd(INVCTR)
        self.write_data(bytearray([0x07]))
 
        self.write_cmd(PWCTR1)
        self.write_data(bytearray([0xA2, 0x02, 0x84]))
        self.write_cmd(PWCTR2)
        self.write_data(bytearray([0xC5]))
        self.write_cmd(PWCTR3)
        self.write_data(bytearray([0x0A, 0x00]))
        self.write_cmd(PWCTR4)
        self.write_data(bytearray([0x8A, 0x2A]))
        self.write_cmd(PWCTR5)
        self.write_data(bytearray([0x8A, 0xEE]))
        self.write_cmd(VMCTR1)
        self.write_data(bytearray([0x0E]))
 
        self.write_cmd(INVOFF)
 
        self.write_cmd(MADCTL)
        self.write_data(bytearray([ROTATIONS[self.rotate] | 0x00 if self.rgb else 0x08]))
 
        self.write_cmd(COLMOD)
        self.write_data(bytearray([0x05]))
 
        self.write_cmd(GMCTRP1)
        self.write_data(
            bytearray([0x02, 0x1c, 0x07, 0x12, 0x37, 0x32, 0x29, 0x2d, 0x29, 0x25, 0x2b, 0x39, 0x00, 0x01, 0x03, 0x10]))
 
        self.write_cmd(GMCTRN1)
        self.write_data(
            bytearray([0x03, 0x1d, 0x07, 0x06, 0x2e, 0x2c, 0x29, 0x2d, 0x2e, 0x2e, 0x37, 0x3f, 0x00, 0x00, 0x02, 0x10]))
 
        self.write_cmd(NORON)
        time.sleep_us(10)
 
        self.write_cmd(DISPON)
        time.sleep_us(100)
 
        self.cs(1)
 
    def reset(self):
        """
        设备重置
        :return:
        """
        self.rst(1)
        time.sleep(0.2)
        self.rst(0)
        time.sleep(0.2)
        self.rst(1)
        time.sleep(0.2)
 
    def write_cmd(self, cmd):
        self.dc(0)
        self.cs(0)
        self.spi.write(bytearray([cmd]))
        self.cs(1)
 
    def write_data(self, buf):
        self.dc(1)
        self.cs(0)
        self.spi.write(buf)
        self.cs(1)
 
    def back_light(self, value):
        """
        背光调节
        :param value: 背光���级 0 ~ 256
        :return:
        """
        self.bl.freq(1000)
        if value >= 0xff:
            value = 0xff
        data = value * 0xffff >> 8
        self.bl.duty_u16(data)
 
    def clear(self):
        """
        清屏
        :return:
        """
        self.fill(0)
        self.show()
 
    def show(self):
        """
        显示
        :return:
        """
        self.set_windows()  # 如果没有这行就会偏移
        self.write_data(self.buffer)
 
    def circle(self, center, radius, c=color(255, 255, 255), section=100):
        """
        画圆
        :param c: 颜色
        :param center: 中心(x, y)
        :param radius: 半径
        :param section: 分段
        :return:
        """
        arr = []
        for m in range(section + 1):
            x = round(radius * math.cos((2 * math.pi / section) * m - math.pi) + center[0])
            y = round(radius * math.sin((2 * math.pi / section) * m - math.pi) + center[1])
            arr.append([x, y])
        for i in range(len(arr) - 1):
            self.line(*arr[i], *arr[i + 1], c)
 
    def image(self, file_name):
        with open(file_name, "rb") as bmp:
            for b in range(0, 80 * 160 * 2, 1024):
                self.buffer[b:b + 1024] = bmp.read(1024)
            self.show()

三、ufont.py

__version__ = 3
 
import time
import struct
 
import framebuf
 
DEBUG = False
 
def timeit(f, *args, **kwargs):
    try:
        myname = str(f).split(' ')[1]
    except:
        myname = "UNKONW"
 
    def new_func(*args, **kwargs):
        if DEBUG:
            try:
                t = time.ticks_us()
                result = f(*args, **kwargs)
                delta = time.ticks_diff(time.ticks_us(), t)
                print('Function {} Time = {:6.3f}ms'.format(myname, delta / 1000))
            except AttributeError:
                t = time.perf_counter_ns()
                result = f(*args, **kwargs)
                delta = time.perf_counter_ns() - t
                print('Function {} Time = {:6.3f}ms'.format(myname, delta / 1000000))
            return result
        else:
            return f(*args, **kwargs)
 
    return new_func
 
class BMFont:
    @staticmethod
    def _list_to_byte(arr):
        b = 0
        for a in arr:
            b = (b << 1) + a
        return bytes([b])
 
    @timeit
    def _bit_list_to_byte_data(self, bit_list):
        """将点阵转换为字节数据
        Args:
            bit_list:
        Returns:
        """
        byte_data = b''
        for _col in bit_list:
            for i in range(0, len(_col), 8):
                byte_data += self._list_to_byte(_col[i:i + 8])
        return byte_data
 
    @timeit
    def __init__(self, font_file):
        self.font_file = font_file
 
        self.font = open(font_file, "rb", buffering=0xff)
 
        self.bmf_info = self.font.read(16)
 
        if self.bmf_info[0:2] != b"BM":
            raise TypeError("字体文件格式不正确: " + font_file)
 
        self.version = self.bmf_info[2]
        if self.version != 3:
            raise TypeError("字体文件版本不正确: " + str(self.version))
 
        self.map_mode = self.bmf_info[3]  # 映射方式
        self.start_bitmap = struct.unpack(">I", b'\x00' + self.bmf_info[4:7])[0]  # 位图开始字节
        self.font_size = self.bmf_info[7]  # 字体大小
        self.bitmap_size = self.bmf_info[8]  # 点阵所占字节
 
    @timeit
    def _to_bit_list(self, byte_data, font_size, *, _height=None, _width=None):
        """将字节数据转��为点阵数据
        Args:
            byte_data: 字节数据
            font_size: 字号大小
            _height: 字体原高度
            _width: 字体原宽度
        Returns:
        """
        _height = _height or self.font_size
        _width = _width or self.bitmap_size // self.font_size * 8
        new_bitarray = [[0 for j in range(font_size)] for i in range(font_size)]
        for _col in range(len(new_bitarray)):
            for _row in range(len(new_bitarray[_col])):
                _index = int(_col / (font_size / _height)) * _width + int(_row / (font_size / _width))
                new_bitarray[_col][_row] = byte_data[_index // 8] >> (7 - _index % 8) & 1
        return new_bitarray
 
    @timeit
    def _color_render(self, bit_list, color):
        """将二值点阵图像转换为 RGB565 彩色字节图像
        Args:
            bit_list:
            color:
        Returns:
        """
        color_array = b""
        for _col in range(len(bit_list)):
            for _row in range(len(bit_list)):
                color_array += struct.pack("<H", color) if bit_list[_col][_row] else b'\x00\x00'
        return color_array
 
    @timeit
    def _get_index(self, word):
        """获取索引
        Args:
            word: 字符
        Returns:
        """
        word_code = ord(word)
        start = 0x10
        end = self.start_bitmap
 
        while start <= end:
            mid = ((start + end) // 4) * 2
            self.font.seek(mid, 0)
            target_code = struct.unpack(">H", self.font.read(2))[0]
            if word_code == target_code:
                return (mid - 16) >> 1
            elif word_code < target_code:
                end = mid - 2
            else:
                start = mid + 2
        return -1
 
    @timeit
    def get_bitmap(self, word):
        """获取点阵图
        Args:
            word: 字符
        Returns:
            bytes 字符点阵
        """
        index = self._get_index(word)
        if index == -1:
            return b'\xff\xff\xff\xff\xff\xff\xff\xff\xf0\x0f\xcf\xf3\xcf\xf3\xff\xf3\xff\xcf\xff?\xff?\xff\xff\xff' \
                   b'?\xff?\xff\xff\xff\xff'
 
        self.font.seek(self.start_bitmap + index * self.bitmap_size, 0)
        return self.font.read(self.bitmap_size)
 
    @timeit
    def text(self, display, string, x, y, color=1, *, font_size=None, reverse=False, clear=False, show=False,
             half_char=True, auto_wrap=False, **kwargs):
        """通过显示屏显示文字
        使用此函数显示文字，必须先确认显示对象是否继承与 framebuf.FrameBuffer。
        如果显示对象没有 clear 方法，需要自行调用 fill 清屏
        Args:
            display: 显示实例
            string: 字符串
            x: 字体左上角 x 轴
            y: 字体左上角 y 轴
            color: 颜色
            font_size: 字号
            reverse: 是否反转背景
            clear: 是否清��之前显示的内容
            show: 是否立刻显示
            half_char: 是否半字节显示 ASCII 字符
            auto_wrap: 自动换行
            **kwargs:
            Returns:
            None
        """
        font_size = font_size or self.font_size
        initial_x = x
 
        # 清屏
        try:
            display.clear() if clear else 0
        except AttributeError:
            print("请自行调用 display.fill(*) 清屏")
 
        for char in range(len(string)):
            # 是否自动换行
            if auto_wrap:
                if auto_wrap and ((x + font_size // 2 >= 128 and ord(string[char]) < 128 and half_char) or
                                  (x + font_size >= 128 and (not half_char or ord(string[char]) > 128))):
                    y += font_size
                    x = initial_x
 
            # 回车
            if string[char] == '\n':
                y += font_size
                x = initial_x
                continue
            # Tab
            elif string[char] == '\t':
                x = ((x // font_size) + 1) * font_size + initial_x % font_size
                continue
            
            # 其它的控制字符不显示
            elif ord(string[char]) < 16:
                continue
            
            # 超过范围的字符不会显示*
            if x > 160 or y > 80:
                continue
            
            byte_data = list(self.get_bitmap(string[char]))
 
            # 反���
            if reverse:
                for _pixel in range(len(byte_data)):
                    byte_data[_pixel] = ~byte_data[_pixel] & 0xff
 
            # 缩放和色彩*
            if color > 1 or font_size != self.font_size:
                bit_data = self._to_bit_list(byte_data, font_size)
                if color > 1:
                    display.blit(
                        framebuf.FrameBuffer(bytearray(self._color_render(bit_data, color)), font_size, font_size,
                                             framebuf.RGB565), x, y)
                else:
                    display.blit(
                        framebuf.FrameBuffer(bytearray(self._bit_list_to_byte_data(bit_data)), font_size, font_size,
                                             framebuf.MONO_HLSB), x, y)
            else:
                display.blit(framebuf.FrameBuffer(bytearray(byte_data), font_size, font_size, framebuf.MONO_HLSB), x, y)
 
            # 英文字符半格显示
            if ord(string[char]) < 128 and half_char:
                x += font_size // 2
            else:
                x += font_size
 
        display.show() if show else 0
 
    def char(self, char, color=1, font_size=None, reverse=False):
        """ 获取字体字��数据
        在没有继承 framebuf.FrameBuffer 的显示驱动,或者内存不足以将一整个屏幕载入缓存帧时
        可以直接获取单字的字节数据,局部更新
        Args:
            char: 单个字符
            color: 颜色
            font_size: 字体大小
            reverse: 反转
            Returns:
            bytearray
        """
        font_size = font_size or self.font_size
        byte_data = list(self.get_bitmap(char))
 
        # 反转
        if reverse:
            for _pixel in range(len(byte_data)):
                byte_data[_pixel] = ~byte_data[_pixel] & 0xff
        if color > 1 or font_size != self.font_size:
            bit_data = self._to_bit_list(byte_data, font_size)
            if color > 1:
                return self._color_render(bit_data, color)
            else:
                return self._bit_list_to_byte_data(bit_data)
        else:
            return bytearray(byte_data)

四、字库font.bmf

下载地址：https://gitee.com/whltaoin_admin/MP_ESP32_ST7735S-

WIFI连接初始化屏幕

# This file is executed on every boot (including wake-boot from deepsleep)
#import esp
#esp.osdebug(None)
#import webrepl
#webrepl.start()
# print("varin")

from machine import Pin,SPI
from st7735 import ST7735,color
from ufont import BMFont
import time
import random
import network
import ntptime

 
font = BMFont("font.bmf")
#  WIFI名称和连接密码
ssid="aaa"
password="12345678"
 
spi = SPI(1,baudrate = 60_000_000,polarity = 0,sck = Pin(2),mosi = Pin(3),miso = None)
tft = ST7735(spi,rst = 10,dc = 6,cs = 7,bl = 8, width = 160, height = 127, offset=(-1,0)  ,rotate = 1, rgb = True)
def network_connect():
    font.text(tft,"WIFI网络连接中~" ,0,0,color(random.randint(1,256),random.randint(1,256),random.randint(1,256)),font_size = 16,reverse = False,clear = False,show = True,half_char = True,auto_wrap = False)   
    sta = network.WLAN(network.STA_IF)
    sta.active(True)
    # 判断WIF是否连接，如无连接通过循环等待WIFI连接后再执行后续代码
    if not sta.isconnected():
        sta.connect(ssid,password)
        while not sta.isconnected():
            pass
        print(sta.ifconfig())
        ntptime.settime()
        print()
        font.text(tft,"WIFI网络连接成功~" ,0,0,color(random.randint(1,256),random.randint(1,256),random.randint(1,256)),font_size = 16,reverse = False,clear = False,show = True,half_char = True,auto_wrap = False)   
        font.text(tft,"WIFI名称为："+ssid ,0,20,color(random.randint(1,256),random.randint(1,256),random.randint(1,256)),font_size = 16,reverse = False,clear = False,show = True,half_char = True,auto_wrap = False)   
        font.text(tft,"IP地址："+sta.ifconfig()[0] ,0,40,color(random.randint(1,256),random.randint(1,256),random.randint(1,256)),font_size = 16,reverse = False,clear = False,show = True,half_char = True,auto_wrap = False)   
        while True:
            # 实时更新屏幕时间，
            t=time.localtime()
            timeStr=   '当前时间是：{}:{}:{}'.format( t[3], t[4], t[5])
            font.text(tft,timeStr ,0,60,color(random.randint(1,256),random.randint(1,256),random.randint(1,256)),font_size = 16,reverse = False,clear = False,show = True,half_char = True,auto_wrap = False)   
            font.text(tft,"今天又是加油的一天呀" ,0,80,color(random.randint(1,256),random.randint(1,256),random.randint(1,256)),font_size = 16,reverse = False,clear = False,show = True,half_char = True,auto_wrap = False)   




if __name__ == "__main__":
    network_connect()

# This file is executed on every boot (including wake-boot from deepsleep)
#import esp
#esp.osdebug(None)
#import webrepl
#webrepl.start()
# print("varin")

from machine import Pin,SPI
from st7735 import ST7735,color
from ufont import BMFont
import time
import random
import network
import ntptime
from machine import RTC
import time

rtc = RTC()



 
font = BMFont("font.bmf")
#  WIFI名称和连接密码
ssid="aaa"
password="12345678"
 
spi = SPI(1,baudrate = 60_000_000,polarity = 0,sck = Pin(2),mosi = Pin(3),miso = None)
tft = ST7735(spi,rst = 10,dc = 6,cs = 7,bl = 8, width = 160, height = 127, offset=(-1,0)  ,rotate = 1, rgb = True)
def network_connect():
    font.text(tft,"WIFI网络连接中~" ,0,0,color(random.randint(1,256),random.randint(1,256),random.randint(1,256)),font_size = 16,reverse = False,clear = False,show = True,half_char = True,auto_wrap = False)   
    sta = network.WLAN(network.STA_IF)
    sta.active(True)
    # 判断WIF是否连接，如无连接通过循环等待WIFI连接后再执行后续代码
    if not sta.isconnected():
        sta.connect(ssid,password)
        while not sta.isconnected():
            pass
        print(sta.ifconfig())
        ntptime.settime()
        print()
        font.text(tft,"WIFI网络连接成功~" ,0,0,color(random.randint(1,256),random.randint(1,256),random.randint(1,256)),font_size = 16,reverse = False,clear = False,show = True,half_char = True,auto_wrap = False)   
        font.text(tft,"WIFI名称为："+ssid ,0,20,color(random.randint(1,256),random.randint(1,256),random.randint(1,256)),font_size = 16,reverse = False,clear = False,show = True,half_char = True,auto_wrap = False)   
        font.text(tft,"IP地址："+sta.ifconfig()[0] ,0,40,color(random.randint(1,256),random.randint(1,256),random.randint(1,256)),font_size = 16,reverse = False,clear = False,show = True,half_char = True,auto_wrap = False)   
        while True:
            # 实时更新屏幕时间
            t= rtc.datetime()
            timeStr=   '当前时间是：{}:{}:{}'.format( t[4]+8, t[5], t[6])
            font.text(tft,timeStr ,0,60,color(random.randint(1,256),random.randint(1,256),random.randint(1,256)),font_size = 16,reverse = False,clear = False,show = True,half_char = True,auto_wrap = False)   
            font.text(tft,"今天又是加油的一天呀" ,0,80,color(random.randint(1,256),random.randint(1,256),random.randint(1,256)),font_size = 16,reverse = False,clear = False,show = True,half_char = True,auto_wrap = False)   
            time.sleep(1)



if __name__ == "__main__":
    network_connect()