openwifi ap sta路由配置教程

一、先启动AP

./wgd.sh

sysctl -w net.ipv4.conf.all.forwarding=1
sysctl -w net.ipv4.conf.default.forwarding=1
sysctl -w net.ipv6.conf.all.forwarding=1
sysctl -w net.ipv6.conf.default.forwarding=1
sysctl -w net.ipv4.conf.all.send_redirects=0
sysctl -w net.ipv4.conf.default.send_redirects=010
sysctl -w net.ipv4.conf.all.rp_filter=0
sysctl -w net.ipv4.conf.default.rp_filter=0
sysctl -w net.ipv4.conf.eth0.forwarding=1
sysctl -w net.ipv4.conf.eth0.send_redirects=0
sysctl -w net.ipv4.conf.eth0.rp_filter=0
sysctl -w net.ipv4.conf.sdr0.forwarding=1
sysctl -w net.ipv4.conf.sdr0.send_redirects=0
sysctl -w net.ipv4.conf.sdr0.rp_filter=0

./fosdem.sh

删除默认网关
route del default gw 192.168.10.1
添加默认网关
route add default gw 192.168.13.XX（STA无线口）

二、再启动STA

启动openwifi脚本
./wgd.sh

有线无线连接
sysctl -w net.ipv4.conf.all.forwarding=1
sysctl -w net.ipv4.conf.default.forwarding=1
sysctl -w net.ipv6.conf.all.forwarding=1
sysctl -w net.ipv6.conf.default.forwarding=1
sysctl -w net.ipv4.conf.all.send_redirects=0
sysctl -w net.ipv4.conf.default.send_redirects=010
sysctl -w net.ipv4.conf.all.rp_filter=0
sysctl -w net.ipv4.conf.default.rp_filter=0
sysctl -w net.ipv4.conf.eth0.forwarding=1
sysctl -w net.ipv4.conf.eth0.send_redirects=0
sysctl -w net.ipv4.conf.eth0.rp_filter=0
sysctl -w net.ipv4.conf.sdr0.forwarding=1
sysctl -w net.ipv4.conf.sdr0.send_redirects=0
sysctl -w net.ipv4.conf.sdr0.rp_filter=0

STA连接AP
wpa_supplicant -i sdr0 -c wpa-openwifi.conf &

STA动态分配
dhclient sdr0

配置STA有线口
ifconfig eth0 192.168.1.20

指定路由
route add -net 192.168.1.0 netmask 255.255.255.0 gw 192.168.1.20

加网关
route add default gw 192.168.13.1