kubeadm极速离线部署Kubernetes 1.27.1版本集群

kubeadm极速部署Kubernetes 1.27.1版本集群

一、集群节点准备

1.1 主机操作系统说明

序号	操作系统及版本	备注
1	CentOS7u9

1.2 主机硬件配置说明

需求	CPU	内存	硬盘	角色	主机名
值	2C	8G	80GB	master	k8s-master01
值	1C	2G	40GB	worker(node)	k8s-worker01
值	1C	2G	40GB	worker(node)	k8s-worker02

1.3 主机配置

1.3.1 主机名配置

由于本次使用3台主机完成kubernetes集群部署，其中1台为master节点,名称为k8s-master01;其中2台为worker节点，名称分别为：k8s-worker01及k8s-worker02

master节点
# hostnamectl set-hostname k8s-master01

worker01节点
# hostnamectl set-hostname k8s-worker01

worker02节点
# hostnamectl set-hostname k8s-worker02

1.3.2 主机IP地址配置

k8s-master节点IP地址为：192.168.71.120/24
# vim /etc/sysconfig/network-scripts/ifcfg-ens33
TYPE="Ethernet"
PROXY_METHOD="none"
BROWSER_ONLY="no"
BOOTPROTO="none"
DEFROUTE="yes"
IPV4_FAILURE_FATAL="no"
IPV6INIT="yes"
IPV6_AUTOCONF="yes"
IPV6_DEFROUTE="yes"
IPV6_FAILURE_FATAL="no"
IPV6_ADDR_GEN_MODE="stable-privacy"
NAME="ens33"
DEVICE="ens33"
ONBOOT="yes"
IPADDR="192.168.71.120"
PREFIX="24"
GATEWAY="192.168.71.2"

k8s-worker1节点IP地址为：192.168.71.121/24
# vim /etc/sysconfig/network-scripts/ifcfg-ens33
TYPE="Ethernet"
PROXY_METHOD="none"
BROWSER_ONLY="no"
BOOTPROTO="none"
DEFROUTE="yes"
IPV4_FAILURE_FATAL="no"
IPV6INIT="yes"
IPV6_AUTOCONF="yes"
IPV6_DEFROUTE="yes"
IPV6_FAILURE_FATAL="no"
IPV6_ADDR_GEN_MODE="stable-privacy"
NAME="ens33"
DEVICE="ens33"
ONBOOT="yes"
IPADDR="192.168.71.121"
PREFIX="24"
GATEWAY="192.168.71.2"

k8s-worker2节点IP地址为：192.168.71.122/24
# vim /etc/sysconfig/network-scripts/ifcfg-ens33
TYPE="Ethernet"
PROXY_METHOD="none"
BROWSER_ONLY="no"
BOOTPROTO="none"
DEFROUTE="yes"
IPV4_FAILURE_FATAL="no"
IPV6INIT="yes"
IPV6_AUTOCONF="yes"
IPV6_DEFROUTE="yes"
IPV6_FAILURE_FATAL="no"
IPV6_ADDR_GEN_MODE="stable-privacy"
NAME="ens33"
DEVICE="ens33"
ONBOOT="yes"
IPADDR="192.168.71.122"
PREFIX="24"
GATEWAY="192.168.71.2"

1.3.3 主机名与IP地址解析

所有集群主机均需要进行配置。

# cat /etc/hosts
127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.71.120 k8s-master01
192.168.71.121 k8s-worker01
192.168.71.122 k8s-worker02

1.3.4 防火墙配置

所有主机均需要操作。

关闭现有防火墙firewalld
# systemctl disable firewalld
# systemctl stop firewalld
# firewall-cmd --state
not running

1.3.5 SELINUX配置

所有主机均需要操作。修改SELinux配置需要重启操作系统。

# sed -ri 's/SELINUX=enforcing/SELINUX=disabled/' /etc/selinux/config

# sestatus

1.3.6 时间同步配置

所有主机均需要操作。最小化安装系统需要安装ntpdate软件。

# crontab -l
0 */1 * * * /usr/sbin/ntpdate time1.aliyun.com

1.3.7 升级操作系统内核(在同操作系统下载好打包到服务器)

所有主机均需要操作。

导入elrepo gpg key
# rpm --import https://www.elrepo.org/RPM-GPG-KEY-elrepo.org
~~~有网的服务器下载打包到服务器



~~~powershell
安装elrepo YUM源仓库
# yum -y install https://www.elrepo.org/elrepo-release-7.0-4.el7.elrepo.noarch.rpm  

安装kernel-ml版本，ml为长期稳定版本，lt为长期维护版本
# yum --enablerepo="elrepo-kernel" -y install kernel-lt.x86_64
yum install --enablerepo="elrepo-kernel" kernel-lt.x86_64 --downloadonly --downloaddir=/fw

设置grub2默认引导为0
# grub2-set-default 0

重新生成grub2引导文件
# grub2-mkconfig -o /boot/grub2/grub.cfg

更新后，需要重启，使用升级的内核生效。
# reboot

重启后，需要验证内核是否为更新对应的版本
# uname -r

1.3.8 配置内核路由转发及网桥过滤

所有主机均需要操作。

添加网桥过滤及内核转发配置文件
# cat /etc/sysctl.d/k8s.conf
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
net.ipv4.ip_forward = 1
vm.swappiness = 0

加载br_netfilter模块
# modprobe br_netfilter

查看是否加载
# lsmod | grep br_netfilter
br_netfilter           22256  0
bridge                151336  1 br_netfilter

1.3.9 安装ipset及ipvsadm

所有主机均需要操作。

安装ipset及ipvsadm
# yum -y install ipset ipvsadm
yum install ipset ipvsadm --downloadonly --downloaddir=/fw

配置ipvsadm模块加载方式
添加需要加载的模块
# cat > /etc/sysconfig/modules/ipvs.modules <<EOF
#!/bin/bash
modprobe -- ip_vs
modprobe -- ip_vs_rr
modprobe -- ip_vs_wrr
modprobe -- ip_vs_sh
modprobe -- nf_conntrack
EOF

授权、运行、检查是否加载
# chmod 755 /etc/sysconfig/modules/ipvs.modules && bash /etc/sysconfig/modules/ipvs.modules && lsmod | grep -e ip_vs -e nf_conntrack

1.3.10 关闭SWAP分区

修改完成后需要重启操作系统，如不重启，可临时关闭，命令为swapoff -a

永远关闭swap分区，需要重启操作系统
# cat /etc/fstab
......

# /dev/mapper/centos-swap swap                    swap    defaults        0 0

在上一行中行首添加#

二、Docker准备（离线安装包）

链接：https://pan.baidu.com/s/1c1wyYpzSCyybVznPlWBifw?pwd=ewpa
提取码：ewpa
–来自百度网盘超级会员V3的分享

2.1 Docker安装YUM源准备（同操作系统下载打包到服务器）

使用阿里云开源软件镜像站。

# wget https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo -O /etc/yum.repos.d/docker-ce.repo

2.2 Docker安装

# yum -y install docker-ce
yum install docker-ce --downloadonly --downloaddir=/fw/docker-ce

链接：https://pan.baidu.com/s/1c1wyYpzSCyybVznPlWBifw?pwd=ewpa 
提取码：ewpa 
--来自百度网盘超级会员V3的分享

2.3 启动Docker服务

# systemctl enable --now docker

2.4 修改cgroup方式

/etc/docker/daemon.json 默认没有此文件，需要单独创建

在/etc/docker/daemon.json添加如下内容

# cat /etc/docker/daemon.json
{
        "exec-opts": ["native.cgroupdriver=systemd"]
}

# systemctl restart docker

2.5 cri-dockerd安装（离线安装包）

链接：https://pan.baidu.com/s/1c1wyYpzSCyybVznPlWBifw?pwd=ewpa
提取码：ewpa
–来自百度网盘超级会员V3的分享

# wget https://github.com/Mirantis/cri-dockerd/releases/download/v0.3.1/cri-dockerd-0.3.1-3.el7.x86_64.rpm

# yum install cri-dockerd-0.3.1-3.el7.x86_64.rpm

# vim /usr/lib/systemd/system/cri-docker.service

修改第10行内容
ExecStart=/usr/bin/cri-dockerd --pod-infra-container-image=registry.k8s.io/pause:3.9 --container-runtime-endpoint fd://

# systemctl start cri-docker
# systemctl enable cri-docker

三、kubernetes 1.27.1 集群部署（离线安装包）

链接：https://pan.baidu.com/s/1c1wyYpzSCyybVznPlWBifw?pwd=ewpa
提取码：ewpa
–来自百度网盘超级会员V3的分享

3.1 集群软件及版本说明

	kubeadm	kubelet	kubectl
版本	1.27.1	1.27.1	1.27.1
安装位置	集群所有主机	集群所有主机	集群所有主机
作用	初始化集群、管理集群等	用于接收api-server指令，对pod生命周期进行管理	集群应用命令行管理工具

3.2 kubernetes YUM源准备

3.2.1 谷歌YUM源

[kubernetes]
name=Kubernetes
baseurl=https://packages.cloud.google.com/yum/repos/kubernetes-el7-x86_64
enabled=1
gpgcheck=0
repo_gpgcheck=0
gpgkey=https://packages.cloud.google.com/yum/doc/yum-key.gpg
        https://packages.cloud.google.com/yum/doc/rpm-package-key.gpg

3.2.2 阿里云YUM源

# cat > /etc/yum.repos.d/k8s.repo <<EOF
[kubernetes]
name=Kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/
enabled=1
gpgcheck=0
repo_gpgcheck=0
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF

3.3 集群软件安装

所有节点均可安装

默认安装
# yum -y install  kubeadm  kubelet kubectl

查看指定版本
# yum list kubeadm.x86_64 --showduplicates | sort -r
# yum list kubelet.x86_64 --showduplicates | sort -r
# yum list kubectl.x86_64 --showduplicates | sort -r

安装指定版本
# yum -y install  kubeadm-1.27.X-0  kubelet-1.27.X-0 kubectl-1.27.X-0
yum install kubeadm-1.27.1-0 kubelet-1.27.1-0 kubectl-1.27.1-0 --downloadonly --downloaddir=/fw/k8s

链接：https://pan.baidu.com/s/1c1wyYpzSCyybVznPlWBifw?pwd=ewpa
提取码：ewpa
–来自百度网盘超级会员V3的分享

3.4 配置kubelet

为了实现docker使用的cgroupdriver与kubelet使用的cgroup的一致性，建议修改如下文件内容。

# vim /etc/sysconfig/kubelet
KUBELET_EXTRA_ARGS="--cgroup-driver=systemd"

设置kubelet为开机自启动即可，由于没有生成配置文件，集群初始化后自动启动
# systemctl enable kubelet

3.5 集群镜像准备（离线镜像）

链接：https://pan.baidu.com/s/1O5BulDhg4h2X4ftv8HgG0g?pwd=ngki
提取码：ngki
–来自百度网盘超级会员V3的分享

可使用VPN实现下载。

# kubeadm config images list --kubernetes-version=v1.27.1

# cat image_download.sh
#!/bin/bash
images_list='
镜像列表'

for i in $images_list
do
        docker pull $i
done

docker save -o k8s-1-27-1.tar $images_list

3.6 集群初始化

[root@k8s-master01 ~]# kubeadm init --kubernetes-version=v1.27.1 --pod-network-cidr=10.244.0.0/16 --apiserver-advertise-address=192.168.71.120  --cri-socket unix:///var/run/cri-dockerd.sock

如果不添加--cri-socket选项，则会报错，内容如下：
Found multiple CRI endpoints on the host. Please define which one do you wish to use by setting the 'criSocket' field in the kubeadm configuration file: unix:///var/run/containerd/containerd.sock, unix:///var/run/cri-dockerd.sock
To see the stack trace of this error execute with --v=5 or higher

初始化过程输出
[init] Using Kubernetes version: v1.27.1
[preflight] Running pre-flight checks
[preflight] Pulling images required for setting up a Kubernetes cluster
[preflight] This might take a minute or two, depending on the speed of your internet connection
[preflight] You can also perform this action in beforehand using 'kubeadm config images pull'
[certs] Using certificateDir folder "/etc/kubernetes/pki"
[certs] Generating "ca" certificate and key
[certs] Generating "apiserver" certificate and key
[certs] apiserver serving cert is signed for DNS names [k8s-master01 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 192.168.10.160]
[certs] Generating "apiserver-kubelet-client" certificate and key
[certs] Generating "front-proxy-ca" certificate and key
[certs] Generating "front-proxy-client" certificate and key
[certs] Generating "etcd/ca" certificate and key
[certs] Generating "etcd/server" certificate and key
[certs] etcd/server serving cert is signed for DNS names [k8s-master01 localhost] and IPs [192.168.10.160 127.0.0.1 ::1]
[certs] Generating "etcd/peer" certificate and key
[certs] etcd/peer serving cert is signed for DNS names [k8s-master01 localhost] and IPs [192.168.10.160 127.0.0.1 ::1]
[certs] Generating "etcd/healthcheck-client" certificate and key
[certs] Generating "apiserver-etcd-client" certificate and key
[certs] Generating "sa" key and public key
[kubeconfig] Using kubeconfig folder "/etc/kubernetes"
[kubeconfig] Writing "admin.conf" kubeconfig file
[kubeconfig] Writing "kubelet.conf" kubeconfig file
[kubeconfig] Writing "controller-manager.conf" kubeconfig file
[kubeconfig] Writing "scheduler.conf" kubeconfig file
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Starting the kubelet
[control-plane] Using manifest folder "/etc/kubernetes/manifests"
[control-plane] Creating static Pod manifest for "kube-apiserver"
[control-plane] Creating static Pod manifest for "kube-controller-manager"
[control-plane] Creating static Pod manifest for "kube-scheduler"
[etcd] Creating static Pod manifest for local etcd in "/etc/kubernetes/manifests"
[wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory "/etc/kubernetes/manifests". This can take up to 4m0s
[apiclient] All control plane components are healthy after 13.006785 seconds
[upload-config] Storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace
[kubelet] Creating a ConfigMap "kubelet-config" in namespace kube-system with the configuration for the kubelets in the cluster
[upload-certs] Skipping phase. Please see --upload-certs
[mark-control-plane] Marking the node k8s-master01 as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]
[mark-control-plane] Marking the node k8s-master01 as control-plane by adding the taints [node-role.kubernetes.io/master:NoSchedule node-role.kubernetes.io/control-plane:NoSchedule]
[bootstrap-token] Using token: 8x4o2u.hslo8xzwwlrncr8s
[bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles
[bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes
[bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials
[bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token
[bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster
[bootstrap-token] Creating the "cluster-info" ConfigMap in the "kube-public" namespace
[kubelet-finalize] Updating "/etc/kubernetes/kubelet.conf" to point to a rotatable kubelet client certificate and key
[addons] Applied essential addon: CoreDNS
[addons] Applied essential addon: kube-proxy

Your Kubernetes control-plane has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

Alternatively, if you are the root user, you can run:

  export KUBECONFIG=/etc/kubernetes/admin.conf

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
  https://kubernetes.io/docs/concepts/cluster-administration/addons/

Then you can join any number of worker nodes by running the following on each as root:

kubeadm join 192.168.10.160:6443 --token 8x4o2u.hslo8xzwwlrncr8s \
        --discovery-token-ca-cert-hash sha256:7323a8b0658fc33d89e627f078f6eb16ac94394f9a91b3335dd3ce73a3f313a0

3.7 集群应用客户端管理集群文件准备

[root@k8s-master01 ~]# mkdir -p $HOME/.kube
[root@k8s-master01 ~]# cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
[root@k8s-master01 ~]# chown $(id -u):$(id -g) $HOME/.kube/config
[root@k8s-master01 ~]# ls /root/.kube/
config

3.8 集群网络插件部署 calico（离线部署）

链接：https://pan.baidu.com/s/1O5BulDhg4h2X4ftv8HgG0g?pwd=ngki
提取码：ngki
–来自百度网盘超级会员V3的分享
docker load -i 导入镜像
kubectl apply -f calico.yaml

使用calico部署集群网络

3.8 集群网络插件部署 calico（vpn部署）

应用operator资源清单文件
[root@k8s-master01 ~]# kubectl create -f https://raw.githubusercontent.com/projectcalico/calico/v3.25.1/manifests/tigera-operator.yaml

~~~powershell
通过自定义资源方式安装
[root@k8s-master01 ~]# wget https://raw.githubusercontent.com/projectcalico/calico/v3.25.1/manifests/custom-resources.yaml

修改文件第13行，修改为使用kubeadm init ----pod-network-cidr对应的IP地址段
[root@k8s-master01 ~]# vim custom-resources.yaml
......
 11     ipPools:
 12     - blockSize: 26
 13       cidr: 10.244.0.0/16 
 14       encapsulation: VXLANCrossSubnet
......

应用资源清单文件
[root@k8s-master01 ~]# kubectl create -f custom-resources.yaml




## 3.9  集群工作节点添加

> 因容器镜像下载较慢，可能会导致报错，主要错误为没有准备好cni（集群网络插件），如有网络，请耐心等待即可。



~~~powershell
[root@k8s-worker01 ~]# kubeadm join 192.168.71.120:6443 --token 8x4o2u.hslo8xzwwlrncr8s \                              --discovery-token-ca-cert-hash sha256:7323a8b0658fc33d89e627f078f6eb16ac94394f9a91b3335dd3ce73a3f313a0 --cri-socket unix:///var/run/cri-dockerd.sock

[root@k8s-worker02 ~]# kubeadm join 192.168.71.120:6443 --token 8x4o2u.hslo8xzwwlrncr8s \
        --discovery-token-ca-cert-hash sha256:7323a8b0658fc33d89e627f078f6eb16ac94394f9a91b3335dd3ce73a3f313a0 --cri-socket unix:///var/run/cri-dockerd.sock

四、 验证集群可用性

查看所有的节点
[root@k8s-master01 ~]# kubectl get nodes
NAME           STATUS   ROLES           AGE   VERSION
k8s-master01   Ready    control-plane   12h   v1.27.1
k8s-worker01   Ready    <none>          12h   v1.27.1
k8s-worker02   Ready    <none>          12h   v1.27.1

再次查看calico-system命名空间中pod运行情况。
[root@k8s-master01 ~]# kubectl get pods -n kube-system -o wide

![在这里插入图片描述](https://i-blog.csdnimg.cn/direct/8a73567ea28d4354bcb23caa194e95c0.png)