华为设备--Hybrid实验

实验环境
建立如图所示拓扑图：

实验步骤：
按照图示配置PC1到PC5五台主机的IP地址，网关，子网掩码
例：PC1

配置完后
在SW1中设置配置

Sys
sysname SW1
vlan batch 2 to 3 10
#interface Ethernet0/0/1
 port hybrid untagged vlan 2
interface Ethernet0/0/2
 port hybrid untagged vlan 2
interface Ethernet0/0/3
 port hybrid untagged vlan 3 10
interface GigabitEthernet0/0/1
 port hybrid tagged vlan 3 10
 port hybrid untagged vlan 2

根据要求设置PVID
SW1
[SW1]int e0/0/1
[SW1-Ethernet0/0/1]p h p v 1
[SW1-Ethernet0/0/1]int e0/0/2
[SW1-Ethernet0/0/2]p h p v 1
[SW1-Ethernet0/0/2]int e0/0/3
[SW1-Ethernet0/0/3]p h p v 10
[SW[SW1]int g0/0/1
[SW1-GigabitEthernet0/0/1]p h p v 1
[SW1-GigabitEthernet0/0/1]]q

在SW2中设置配置
SW2命令

Sys
sysname R2
vlan batch 2 to 3 10
interface Ethernet0/0/1
 port hybrid untagged vlan 2
interface Ethernet0/0/2
 port hybrid untagged vlan 3 10
interface GigabitEthernet0/0/1
 port hybrid tagged vlan 3 10
 port hybrid untagged vlan 2

SW2]int e0/0/1
[SW2-Ethernet0/0/1]p h p v 2
[SW2-Ethernet0/0/1]int e0/0/2
[SW2-Ethernet0/0/2]p h 
Jun  1 2020 11:21:54-08:00 R2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 10, the c
hange loop count is 0, and the maximum number of records is 4095.	
[SW2-Ethernet0/0/2]p h p v 3
[SW2-Ethernet0/0/2]
[SW2-Ethernet0/0/2]int g0/0/1
[SW2-GigabitEthernet0/0/1]p h p v 1
[SW2-GigabitEthernet0/0/1]q

设置完成后
此时PC1,PC2,PC4 可以互相ping通，与PC3，PC5不通


PC3,PC5可以互通，与其他PC不通

实验结束。