- 博客(10)
- 收藏
- 关注
RSS订阅原创 思科6506恢复密码
一、加电启动按Ctrl+Break二、confreg 0x2142 更改三、reset四、copy startup-config running-config五、config-register 0x2102六、enable password PASS七、保存并重启步骤System Bootstrap, Version 12.2(50r)SYS3, RELEASE SOFTWARE (fc1)Technical Support: http://www.cisco.com/t.
2021-01-08 19:37:32
1664
1
原创 H3C扩展模式作用
一、下载文件使用超级终端，发送Xmodem文件 EXTENDED BOOT MENU1. Download image to flash2. Select image to boot3. Display all files in flash4. Delete file from flash5. Restore to factory default configuration6. Enter BootRom upgrade menu7. Skip current system co..
2020-12-31 16:09:00
1065
原创 思科2960恢复系统
consol口接入电脑Using driver version 1 for media type 1Base ethernet MAC Address: 34:db:fd:4b:58:80Xmodem file system is available.The password-recovery mechanism is enabled.The system has been interrupted prior to initializing theflash filesystem. The.
2020-12-28 11:13:40
1433
原创 思科2960导出系统
电脑配置IP 10.0.0.2启动TFTP交换机配置IP 10.0.0.1输入命令：copy flash:c2960s-universalk9-mz.122-55.SE7/c2960s-universalk9-mz.122-55.SE7.bin tftp://10.0.0.2 步骤Switch con0 is now availablePress RETURN to get started.Switch>enableSwitch#configure terminalEnt..
2020-12-28 09:39:17
576
原创 思科2960恢复密码
Using driver version 1 for media type 1Base ethernet MAC Address: 34:db:fd:4b:58:80Xmodem file system is available.The password-recovery mechanism is enabled.The system has been interrupted prior to initializing theflash filesystem. The following c..
2020-12-25 10:28:38
1737
1
原创 光模块
GBIC Gigabit Interface Converter 千兆位电信号转换为光信号的接口器件SFP Small Form-factor Pluggable 小的外形可插拔
2020-12-23 09:06:11
465
3
原创 数据包顺序
TCP Previous sement not captured出现在连续的数据包，出现丢包的情况，他前面的丢包，与上一个数据包之间存在丢包现象TCP Dup ACK 序号#次数出现在丢包然后再次请求TCP Fast Restransmission出现在客户端请求丢失的报文，快速重传的的第一个丢失的数据包TCP Restransmission按顺序发送的丢失的数据包三次握手建立连接客户端请求序号1467的数据包报文接收完毕客户端又请求数据序号195..
2020-12-11 16:36:38
621
空空如也
空空如也
TA创建的收藏夹 TA关注的收藏夹
TA关注的人