开机按 Ctrl + B 进入扩展模式
Starting......
Press Ctrl+D to access BASIC BOOT MENU
Booting Normal Extend BootWare....
********************************************************************************
* *
* H3C S5130S-28S-HI Switch BOOTROM, Version 110 *
* *
********************************************************************************
Copyright (c) 2004-2017 New H3C Technologies Co., Ltd.
Creation Date : Apr 17 2017, 16:17:22
CPU Clock Speed : 800MHz
Memory Size : 512MB
Flash Size : 256MB
CPLD Version : 001
PCB Version : Ver.C
Mac Address : 38
Press Ctrl+B to access EXTENDED BOOT MENU..
Password recovery capability is enabled.
一、跳过console 密码启动
Password recovery capability is enabled.
EXTENDED BOOT MENU
1. Download image to flash
2. Select image to boot
3. Display all files in flash
4. Delete file from flash
5. Restore to factory default configuration
6. Enter BootRom upgrade menu
7. Skip current system configuration
8. Set switch startup mode
9. Set The Operating Device
0. Reboot
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format file system
Ctrl+P: Change authentication for console login 跳过console验证
Ctrl+R: Download image to SDRAM and run
Ctrl+C: Display Copyright
Enter your choice(0-9):
Authentication is required for console login.
Are you sure you want to skip the authentication for console login? (Y/N):Y
Setting...Done.
二、跳过保存配置启动
EXTENDED BOOT MENU
1. Download image to flash
2. Select image to boot
3. Display all files in flash
4. Delete file from flash
5. Restore to factory default configuration
6. Enter BootRom upgrade menu
7. Skip current system configuration
8. Set switch startup mode
9. Set The Operating Device
0. Reboot
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format file system
Ctrl+P: Change authentication for console login
Ctrl+R: Download image to SDRAM and run
Ctrl+C: Display Copyright
Enter your choice(0-9): 7
The current setting will run with current configuration file when reboot.
Are you sure you want to skip current configuration file when reboot? Yes or No(Y/N):Y
Setting...Done.
三、下载文件到FLASH
使用超级终端,发送Xmodem文件
EXTENDED BOOT MENU
1. Download image to flash
2. Select image to boot
3. Display all files in flash
4. Delete file from flash
5. Restore to factory default configuration
6. Enter BootRom upgrade menu
7. Skip current system configuration
8. Set switch startup mode
9. Set The Operating Device
0. Reboot
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format file system
Ctrl+P: Change authentication for console login
Ctrl+R: Download image to SDRAM and run
Ctrl+C: Display Copyright
Enter your choice(0-9): 1
1. Set TFTP protocol parameters
2. Set FTP protocol parameters
3. Set XMODEM protocol parameters
0. Return to boot menu
Enter your choice(0-3): 3
Please select your download baudrate:
1.* 9600
2. 19200
3. 38400
4. 57600
5. 115200
0. Return to boot menu
Enter your choice(0-5): 1
Download baudrate is 9600 bps
Please change the terminal's baudrate to 9600 bps and select XMODEM protocol
Press enter key when ready
Are you sure to download file to flash? Yes or No (Y/N):Y
Now please start transfer file with XMODEM protocol
If you want to exit, Press <Ctrl+X>
Loading ...CCCCCCCCCCCCCCCCCCCCCCCCC
Starting xmodem transfer. Press Ctrl+C to cancel.
Transferring sta.cf...
100% 2 KB 935 bytes/sec 00:00:03 0 Errors
Free space: 189048832 bytes
Writing flash.....
Done.
Your baudrate should be set to 9600 bps again!
Press enter key when ready
使用TFTP服务器下载文件
EXTENDED BOOT MENU
1. Download image to flash
2. Select image to boot
3. Display all files in flash
4. Delete file from flash
5. Restore to factory default configuration
6. Enter BootRom upgrade menu
7. Skip current system configuration
8. Set switch startup mode
9. Set The Operating Device
0. Reboot
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format file system
Ctrl+P: Change authentication for console login
Ctrl+R: Download image to SDRAM and run
Ctrl+C: Display Copyright
Enter your choice(0-9): 1
1. Set TFTP protocol parameters
2. Set FTP protocol parameters
3. Set XMODEM protocol parameters
0. Return to boot menu
Enter your choice(0-3): 1
Load File Name :a.cfg
:a.cfg 需要传输的文件名
Server IP Address :192.168.1.66 10.0.0.2 终端的IP地址,TFTP服务器地址
Local IP Address :192.168.1.2 10.0.0.1 交换机配置的地址
Subnet Mask :0.0.0.0
Gateway IP Address :0.0.0.0
Are you sure to download file to flash? Yes or No (Y/N):Y
Loading...Done.
The file you download is not an image.
Free space: 189042688 bytes
Writing flash....
Done.
四、删除文件
EXTENDED BOOT MENU
1. Download image to flash
2. Select image to boot
3. Display all files in flash
4. Delete file from flash
5. Restore to factory default configuration
6. Enter BootRom upgrade menu
7. Skip current system configuration
8. Set switch startup mode
9. Set The Operating Device
0. Reboot
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format file system
Ctrl+P: Change authentication for console login
Ctrl+R: Download image to SDRAM and run
Ctrl+C: Display Copyright
Enter your choice(0-9): 4
Deleting the file in flash:
File Number File Size(bytes) File Name
================================================================================
1 2816 flash:/default_file
2 2807 flash:/a.cfg
3 567 flash:/dsakey
4 591 flash:/serverkey
5 735 flash:/hostkey
6 50 flash:/.trash/.trashinfo
7 2984 flash:/.trash/startup.cfg_0001
8 80642 flash:/startup.mdb
9(*) 2849 flash:/startup.cfg
10 2902 flash:/running
11 926 flash:/ifindex.dat
12 536 flash:/versionInfo/version0.dat
13 8 flash:/versionInfo/versionCtl.dat
14 220684 flash:/defaultfile.zip
15 9032640 flash:/logfile/logfile.log
16(*) 53148672 flash:/s5130s_hi-cmw710-system-r6113.bin
17(*) 5165056 flash:/s5130s_hi-cmw710-boot-r6113.bin
Free space: 189036544 bytes
The current image is s5130s_hi-cmw710-boot-r6113.bin
(*)-with main attribute
(b)-with backup attribute
(*b)-with both main and backup attribute
Please input the file number to change: 2
The file you selected is a.cfg,Delete it? (Y/N):Y
Deleting...Done.