重点字符
求字符串长度 strlen
长度不受限制的字符串函数 strcpy strcat strcmp
长度受限制的字符串函数介绍 strncpy strncat strncmp
字符串查找 strstr strtok
错误信息报告 strerror
前言
C语言中对字符和字符串的处理很是频繁,但是C语言本身是没有字符串类型的,字符串通常放在 常量字符串 中 或者 字符数组 中。 字符串常量 适用于那些对它不做修改的字符串函数
函数介绍
strlen
size_t strlen ( const char * str );
1.字符串已经 '\0' 作为结束标志,strlen函数返回的是在字符串中 '\0' 前面出现的字符个数(不包含 '\0' )。
2.参数指向的字符串必须要以 '\0' 结束。
3.注意函数的返回值为size_t,是无符号的( 易错 )
4.学会strlen函数的模拟实现:
#include <stdio.h>
int main()
{
const char*str1 = "abcdef";
const char*str2 = "bbb";
if(strlen(str2)-strlen(str1)>0)
{
printf("str2>str1\n");
}
else
{
printf("srt1>str2\n");
}
return 0;
}
strcpy
char* strcpy(char * destination, const char * source );
1.Copies the C string pointed by source into the array pointed by destination, including the terminating null character (and stopping at that point).
2.源字符串必须以 '\0' 结束。
3.会将源字符串中的 '\0' 拷贝到目标空间。
4.目标空间必须足够大,以确保能存放源字符串。
5.目标空间必须可变。
strcat
char * strcat ( char * destination, const char * source );
1.Appends a copy of the source string to the destination string. The terminating null character in destination is overwritten by the first character of source, and a null-character is included at the end of the new string formed by the concatenation of both in destination.
2.源字符串必须以 '\0' 结束。
3.目标空间必须有足够的大,能容纳下源字符串的内容。
4.目标空间必须可修改。
strcmp
int strcmp(const char * str1, const char * str2 );
标准规定: 第一个字符串大于第二个字符串,则返回大于0的数字
第一个字符串等于第二个字符串,则返回0
第一个字符串,小于第二个字符串,则返回小于0的数字
strncpy
char * strncpy ( char * destination, const char * source, size_t num );
1.Copies the first num characters of source to destination. If the end of the source C string (which is signaled by a null-character) is found before num characters have been copied, destination is padded with zeros until a total of num characters have been written to it.
2.拷贝num个字符从源字符串到目标空间。
3.如果源字符串的长度小于num,则拷贝完源字符串之后,在目标的后边追加0,直到num个。
strncat
char * strncat ( char * destination, const char * source, size_t num );
/* strncat example */
#include <stdio.h>
#include <string.h>
int main ()
{
char str1[20];
char str2[20];
strcpy (str1,"To be ");
strcpy (str2,"or not to be");
strncat (str1, str2, 6);
puts (str1);
return 0;
}
strncmp
int strcmp( const char * str1, const char * str2, size_t num );
比较到出现另个字符不一样或者一个字符串结束或者num个字符全部比较完。
/* strncmp example */
#include <stdio.h>
#include <string.h>
int main ()
{
char str[][5] = { "R2D2" , "C3PO" , "R2A6" };
int n;
puts ("Looking for R2 astromech droids...");
for (n=0 ; n<3 ; n++)
if (strncmp (str[n],"R2xx",2) == 0)
{
printf ("found %s\n",str[n]);
}
return 0;
}
strstr
char * strstr ( const char *, const char * );
/* strstr example */
#include <stdio.h>
#include <string.h>
int main ()
{
char str[] ="This is a simple string";
char * pch;
pch = strstr (str,"simple");
strncpy (pch,"sample",6);
puts (str);
return 0;
}
strtok
char * strtok( char * str, const char * sep );
1.sep参数是个字符串,定义了用作分隔符的字符集合
2.第一个参数指定一个字符串,它包含了0个或者多个由sep字符串中一个或者多个分隔符分割的标记。
3.strtok函数找到str中的下一个标记,并将其用 \0 结尾,返回一个指向这个标记的指针。(注:strtok函数会改 变被操作的字符串,所以在使用strtok函数切分的字符串一般都是临时拷贝的内容并且可修改。)
4.strtok函数的第一个参数不为 NULL ,函数将找到str中第一个标记,strtok函数将保存它在字符串中的位置。
5.strtok函数的第一个参数为 NULL ,函数将在同一个字符串中被保存的位置开始,查找下一个标记。
6.如果字符串中不存在更多的标记,则返回 NULL 指针。
/* strtok example */
#include <stdio.h>
#include <string.h>
int main ()
{
char str[] ="- This, a sample string.";
char * pch;
printf ("Splitting string \"%s\" into tokens:\n",str);
pch = strtok (str," ,.-");
while (pch != NULL)
{
printf ("%s\n",pch);
pch = strtok (NULL, " ,.-");
}
return 0;
}
strerror
char * strerror(int errnum);
返回错误码,所对应的错误信息。