stm32f10x.h文件分析理解

于 2022-05-01 15:38:22 发布
阅读量2.6k 收藏
点赞数 1
分类专栏： 笔记 文章标签： 单片机
原文链接：https://www.cnblogs.com/caihongsheng/p/3513279.html
版权
这篇博客详细解析了STM32F10x的头文件stm32f10x.h，讲解了extern "C"的作用，以及如何根据不同的器件容量选择合适的定义。文章还介绍了如何设置外设驱动，以及关于HSE、HSI的配置，并给出了中断线的定义。最后，博主提到了外设寄存器的结构体定义和位操作的宏定义。

摘要生成于 C知道 ，由 DeepSeek-R1 满血版支持， 前往体验 >

stm32f10x.h文件分析理解 - Hans.Cai - 博客园

extern "C" { 这个语句的意思，经度娘，了解到原来是用来说明后面的定义都是使用C语言写的。这个 __cplusplus 是指C++来的，4、5句的意思就是说如果用C++编译器的话，它里面是定义有__cplusplus 这个的，而通过 extern "C" { 告知编译器，这段代码是用C编写的，要按照C语言编译。这是因为C++里面有函数重载，编译的时候把参数也编译了，而C的话，编译只编译函数名。

下面这段是用来定义器件容量，可以通过自己取消注释来选择，也可以在KEIL里面设置全局宏定义，2种方式。

#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD) && !defined (STM32F10X_HD_VL) && !defined (STM32F10X_XL) && !defined (STM32F10X_CL) 
  /* #define STM32F10X_LD */     /*!< STM32F10X_LD: STM32 Low density devices */
  /* #define STM32F10X_LD_VL */  /*!< STM32F10X_LD_VL: STM32 Low density Value Line devices */  
  /* #define STM32F10X_MD */     /*!< STM32F10X_MD: STM32 Medium density devices */
  /* #define STM32F10X_MD_VL */  /*!< STM32F10X_MD_VL: STM32 Medium density Value Line devices */  
  /* #define STM32F10X_HD */     /*!< STM32F10X_HD: STM32 High density devices */
  /* #define STM32F10X_HD_VL */  /*!< STM32F10X_HD_VL: STM32 High density value line devices */  
  /* #define STM32F10X_XL */     /*!< STM32F10X_XL: STM32 XL-density devices */
  /* #define STM32F10X_CL */     /*!< STM32F10X_CL: STM32 Connectivity line devices */
#endif


#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD) && !defined (STM32F10X_HD_VL) && !defined (STM32F10X_XL) && !defined (STM32F10X_CL)
 #error "Please select first the target STM32F10x device used in your application (in stm32f10x.h file)"
#endif

 

如果没有定义器件的话，编译的时候就会出现以下错误：

"Please select first the target STM32F10x device used in your application (in stm32f10x.h file)"

用于定义是否使用外设驱动，如果注释掉或者keil中没设全局宏定义的话，则代表不使用ST库提供的外设驱动库，在本文倒数第二段代码中有句

　　#ifdef USE_STDPERIPH_DRIVER

　　　#include "stm32f10x_conf.h"

　　#endif

　stm32f10x_conf.h用于外设注释配置。

#if !defined  USE_STDPERIPH_DRIVER
/**
 * @brief Comment the line below if you will not use the peripherals drivers.
   In this case, these drivers will not be included and the application code will 
   be based on direct access to peripherals registers 
   */
  /*#define USE_STDPERIPH_DRIVER*/
#endif

 

下面应该是对于器件HSE的设置

/**
 * @brief In the following line adjust the value of External High Speed oscillator (HSE)
   used in your application 
   
   Tip: To avoid modifying this file each time you need to use different HSE, you
        can define the HSE value in your toolchain compiler preprocessor.
  */           
#if !defined  HSE_VALUE
 #ifdef STM32F10X_CL   
  #define HSE_VALUE    ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */
 #else 
  #define HSE_VALUE    ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
 #endif /* STM32F10X_CL */
#endif /* HSE_VALUE */

 　设置启动超时值和HSI

/**
 * @brief In the following line adjust the External High Speed oscillator (HSE) Startup 
   Timeout value 
   */
#define HSE_STARTUP_TIMEOUT   ((uint16_t)0x0500) /*!< Time out for HSE start up */

#define HSI_VALUE    ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/

 　标准外设库版本号的定义

/**
 * @brief STM32F10x Standard Peripheral Library version number
   */
#define __STM32F10X_STDPERIPH_VERSION_MAIN   (0x03) /*!< [31:24] main version */                                  
#define __STM32F10X_STDPERIPH_VERSION_SUB1   (0x05) /*!< [23:16] sub1 version */
#define __STM32F10X_STDPERIPH_VERSION_SUB2   (0x00) /*!< [15:8]  sub2 version */
#define __STM32F10X_STDPERIPH_VERSION_RC     (0x00) /*!< [7:0]  release candidate */ 
#define __STM32F10X_STDPERIPH_VERSION       ( (__STM32F10X_STDPERIPH_VERSION_MAIN << 24)\
                                             |(__STM32F10X_STDPERIPH_VERSION_SUB1 << 16)\
                                             |(__STM32F10X_STDPERIPH_VERSION_SUB2 << 8)\
                                             |(__STM32F10X_STDPERIPH_VERSION_RC))

 　配置Cortex-M3处理器和核内外设

/**
 * @brief Configuration of the Cortex-M3 Processor and Core Peripherals 
 */
#ifdef STM32F10X_XL
 #define __MPU_PRESENT             1 /*!< STM32 XL-density devices provide an MPU */
#else
 #define __MPU_PRESENT             0 /*!< Other STM32 devices does not provide an MPU */
#endif /* STM32F10X_XL */
#define __NVIC_PRIO_BITS          4 /*!< STM32 uses 4 Bits for the Priority Levels    */
#define __Vendor_SysTickConfig    0 /*!< Set to 1 if different SysTick Config is used */

 　中断线定义，前部分对于所有STM32F10x都有相同定义，后部分根据不同器件容量采用条件编译定义不同中断线。

/**
 * @brief STM32F10x Interrupt Number Definition, according to the selected device 
 *        in @ref Library_configuration_section 
 */
typedef enum IRQn
{
/******  Cortex-M3 Processor Exceptions Numbers ***************************************************/
  NonMaskableInt_IRQn         = -14,    /*!< 2 Non Maskable Interrupt                             */
  MemoryManagement_IRQn       = -12,    /*!< 4 Cortex-M3 Memory Management Interrupt              */
  BusFault_IRQn               = -11,    /*!< 5 Cortex-M3 Bus Fault Interrupt                      */
  UsageFault_IRQn             = -10,    /*!< 6 Cortex-M3 Usage Fault Interrupt                    */
  SVCall_IRQn                 = -5,     /*!< 11 Cortex-M3 SV Call Interrupt                       */
  DebugMonitor_IRQn           = -4,     /*!< 12 Cortex-M3 Debug Monitor Interrupt                 */
  PendSV_IRQn                 = -2,     /*!< 14 Cortex-M3 Pend SV Interrupt                       */
  SysTick_IRQn                = -1,     /*!< 15 Cortex-M3 System Tick Interrupt                   */

/******  STM32 specific Interrupt Numbers *********************************************************/
  WWDG_IRQn                   = 0,      /*!< Window WatchDog Interrupt                            */
  PVD_IRQn                    = 1,      /*!< PVD through EXTI Line detection Interrupt            */
  TAMPER_IRQn                 = 2,      /*!< Tamper Interrupt                                     */
  RTC_IRQn                    = 3,      /*!< RTC global Interrupt                                 */
  FLASH_IRQn                  = 4,      /*!< FLASH global Interrupt                               */
  RCC_IRQn                    = 5,      /*!< RCC global Interrupt                                 */
  EXTI0_IRQn                  = 6,      /*!< EXTI Line0 Interrupt                                 */
  EXTI1_IRQn                  = 7,      /*!< EXTI Line1 Interrupt                                 */
  EXTI2_IRQn                  = 8,      /*!< EXTI Line2 Interrupt                                 */
  EXTI3_IRQn                  = 9,      /*!< EXTI Line3 Interrupt                                 */
  EXTI4_IRQn                  = 10,     /*!< EXTI Line4 Interrupt                                 */
  DMA1_Channel1_IRQn          = 11,     /*!< DMA1 Channel 1 global Interrupt                      */
  DMA1_Channel2_IRQn          = 12,     /*!< DMA1 Channel 2 global Interrupt                      */
  DMA1_Channel3_IRQn          = 13,     /*!< DMA1 Channel 3 global Interrupt                      */
  DMA1_Channel4_IRQn          = 14,     /*!< DMA1 Channel 4 global Interrupt                      */
  DMA1_Channel5_IRQn          = 15,     /*!< DMA1 Channel 5 global Interrupt                      */
  DMA1_Channel6_IRQn          = 16,     /*!< DMA1 Channel 6 global Interrupt                      */
  DMA1_Channel7_IRQn          = 17,     /*!< DMA1 Channel 7 global Interrupt                      */

  #ifdef STM32F10X_LD
  ...
  #endif /* STM32F10X_LD */  

  #ifdef STM32F10X_LD_VL
  ...
  #endif /* STM32F10X_LD_VL */

  #ifdef STM32F10X_MD
  ...
  #endif /* STM32F10X_MD */  

  #ifdef STM32F10X_MD_VL
  ...
  #endif /* STM32F10X_MD_VL */

  #ifdef STM32F10X_HD
  ...
  #endif /* STM32F10X_HD */  

  ...
  ...
  ...
} IRQn_Type;

 为兼容旧版本类似而生。

@addtogroup Exported_types/*!< STM32F10x Standard Peripheral Library old types (maintained for legacy purpose) */
typedef int32_t  s32;
typedef int16_t s16;
typedef int8_t  s8;

typedef const int32_t sc32;  /*!< Read Only */
typedef const int16_t sc16;  /*!< Read Only */
typedef const int8_t sc8;   /*!< Read Only */

typedef __IO int32_t  vs32;
typedef __IO int16_t  vs16;
typedef __IO int8_t   vs8;

typedef __I int32_t vsc32;  /*!< Read Only */
typedef __I int16_t vsc16;  /*!< Read Only */
typedef __I int8_t vsc8;   /*!< Read Only */

typedef uint32_t  u32;
typedef uint16_t u16;
typedef uint8_t  u8;

typedef const uint32_t uc32;  /*!< Read Only */
typedef const uint16_t uc16;  /*!< Read Only */
typedef const uint8_t uc8;   /*!< Read Only */

typedef __IO uint32_t  vu32;
typedef __IO uint16_t vu16;
typedef __IO uint8_t  vu8;

typedef __I uint32_t vuc32;  /*!< Read Only */
typedef __I uint16_t vuc16;  /*!< Read Only */
typedef __I uint8_t vuc8;   /*!< Read Only */

typedef enum {RESET = 0, SET = !RESET} FlagStatus, ITStatus;

typedef enum {DISABLE = 0, ENABLE = !DISABLE} FunctionalState;
#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))

typedef enum {ERROR = 0, SUCCESS = !ERROR} ErrorStatus;
/*!< STM32F10x Standard Peripheral Library old definitions (maintained for legacy purpose) */
#define HSEStartUp_TimeOut   HSE_STARTUP_TIMEOUT
#define HSE_Value            HSE_VALUE
#define HSI_Value            HSI_VALUE

 　把全部外设寄存器定义成结构体

/* @addtogroup Peripheral_registers_structures  */  

/** 
  * @brief Analog to Digital Converter  
  */
typedef struct
{
} ADC_TypeDef;

/** 
  * @brief Backup Registers  
  */
typedef struct
{
} BKP_TypeDef;

/**

 对上面定义的结构体的成员，即寄存器映射到相应的地址上，以下包括一个是地址映射，一个是寄存器声明。

/** @addtogroup Peripheral_memory_map
  * @{
  */
#define FLASH_BASE            ((uint32_t)0x08000000) /*!< FLASH base address in the alias region */
#define SRAM_BASE             ((uint32_t)0x20000000) /*!< SRAM base address in the alias region */
#define PERIPH_BASE           ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */

#define SRAM_BB_BASE          ((uint32_t)0x22000000) /*!< SRAM base address in the bit-band region */
#define PERIPH_BB_BASE        ((uint32_t)0x42000000) /*!< Peripheral base address in the bit-band region */

#define FSMC_R_BASE           ((uint32_t)0xA0000000) /*!< FSMC registers base address */

 

一开头讲过，如果定义使用外设驱动，则包含　stm32f10x_conf.h  用来配置所使用外设的库函数

#ifdef USE_STDPERIPH_DRIVER
  #include "stm32f10x_conf.h"
#endif

　定义一些宏的操作，下面是位操作。

/** @addtogroup Exported_macro
  * @{
  */

#define SET_BIT(REG, BIT)     ((REG) |= (BIT))

#define CLEAR_BIT(REG, BIT)   ((REG) &= ~(BIT))

#define READ_BIT(REG, BIT)    ((REG) & (BIT))

#define CLEAR_REG(REG)        ((REG) = (0x0))

#define WRITE_REG(REG, VAL)   ((REG) = (VAL))

#define READ_REG(REG)         ((REG))

#define MODIFY_REG(REG, CLEARMASK, SETMASK)  WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))

评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值