RIP实验

RIP实验

基础配置
R1:
[r1]int g0/0/0
[r1-GigabitEthernet0/0/0]ip add 192.168.1.1 24
[r1-LoopBack0]ip add 1.1.1.1 24
[r1-LoopBack1]ip add 1.1.2.1 24
R2:
[r2]int g0/0/1
[r2-GigabitEthernet0/0/1]ip add 192.168.1.2 24
[r2-GigabitEthernet0/0/1]int g0/0/1
[r2-GigabitEthernet0/0/1]ip add 192.168.2.1 24
[r2-GigabitEthernet0/0/1]int lo0
[r2-LoopBack0]ip add 2.2.1.1 24
[r2-LoopBack0]int lo 1
[r2-LoopBack1]ip add 2.2.2.1 24
R3:
[r3]int g0/0/1
[r3-GigabitEthernet0/0/1]ip add 192.168.2.2 24
[r3-GigabitEthernet0/0/1]int lo0 
[r3-LoopBack0]ip add 3.3.3.1 24

整个网络运行RIPV2但不能直接宣R3回环
[r1]rip 1
[r1-rip-1]ver 2
[r1-rip-1]network 1.0.0.0
[r1-rip-1]network 192.168.1.0
[r2]rip 1
[r2-rip-1]ver 2
[r2-rip-1]network 2.0.0.0
[r2-rip-1]network 192.168.1.0
[r2-rip-1]network 192.168.2.0
[r3]rip 1
[r3-rip-1]ver 2    
[r3-rip-1]network 192.168.2.0

为了全网可同将r3变为缺省路由
[r3]rip 1
[r3-rip-1]default-route originate 
减少路由条目
[r1]int g0/0/0
[r1-GigabitEthernet0/0/0]rip summ    
[r1-GigabitEthernet0/0/0]rip summary-address 1.1.0.0 255.255.252.0
[r2]int g0/0/1    
[r2-GigabitEthernet0/0/1]rip summary-address 2.2.0.0 255.255.252.0
[r2-GigabitEthernet0/0/1]q
[r2]int g0/0/0
[r2-GigabitEthernet0/0/0]rip summary-address 2.2.0.0 255.255.252.0
保障更新安全
[r1]int g0/0/0
[r1-GigabitEthernet0/0/0]rip authentication-mode md5 usual cipher 123456
[r2-GigabitEthernet0/0/0]rip authentication-mode md5 usual cipher 123456
[r2-GigabitEthernet0/0/0]int g0/0/1
[r2-GigabitEthernet0/0/1]rip authentication-mode md5 usual cipher 123456
[r3-LoopBack0]int g0/0/1
[r3-GigabitEthernet0/0/1]rip authentication-mode md5 usual cipher 123456