VLAN实验

最新推荐文章于 2024-08-25 12:26:45 发布

巷子里的酒

最新推荐文章于 2024-08-25 12:26:45 发布

阅读量75

点赞数

文章标签：网络开发语言

本文链接：https://blog.csdn.net/weixin_64651504/article/details/128963950

版权

该文详细描述了对多个交换机(SW1,SW2,SW3)的VLAN配置，包括access端口、hybrid端口和trunk端口的设置，以及PVID和允许通过的VLAN。同时，配置路由器R1的接口IP地址，创建并设置了两个DHCP地址池，用于分配192.168.1.0/24和192.168.2.0/24子网的IP地址。

摘要由CSDN通过智能技术生成

一. 实验要求

请添加图片描述

二. 配置

2.1 top

在这里插入图片描述

2.2 SW1

[sw1]vlan batch 2 to 6
[sw1-Ethernet0/0/1]port link-type access 
[sw1-Ethernet0/0/1]port default vlan 2
[sw1-Ethernet0/0/1]int e0/0/2
[sw1-Ethernet0/0/2]port hybrid pvid vlan 3
[sw1-Ethernet0/0/2]port hybrid untagged vlan 3 to 6
[sw1]int g0/0/2
[sw1-GigabitEthernet0/0/2]port link-type trunk
[sw1-GigabitEthernet0/0/2]port trunk allow-pass vlan all

[sw1]int g0/0/1
[sw1-GigabitEthernet0/0/1]port hybrid tagged vlan 2
[sw1-GigabitEthernet0/0/1]port hybrid untagged vlan 3 to 6

2.3 SW2

[sw2]vlan batch 2 to 6
[sw2]int e0/0/1
[sw2-Ethernet0/0/1]port l a 
[sw2-Ethernet0/0/1]port default vlan 2
[sw2-Ethernet0/0/1]int e0/0/2
[sw2-Ethernet0/0/2]port hybrid pvid vlan 4
[sw2-Ethernet0/0/2]port hybrid untagged vlan 3 to 5
[sw2-Ethernet0/0/2]int g0/0/1
[sw2-GigabitEthernet0/0/1]port l t
[sw2-GigabitEthernet0/0/1]port trunk allow-pass vlan all
[sw2-GigabitEthernet0/0/1]int g0/0/2
[sw2-GigabitEthernet0/0/2]port hybrid tagged vlan 2 to 6

2.4 SW3

[sw3]vlan batch 2 to 6
[sw3]int e0/0/1
[sw3-Ethernet0/0/1]port hybrid pvid vlan 5
[sw3-Ethernet0/0/1]port hybrid untagged vlan 3 to 5
[sw3-Ethernet0/0/1]int e0/0/2
[sw3-Ethernet0/0/2]port hybrid pvid vlan 6
[sw3-Ethernet0/0/2]port hybrid untagged vlan 3 6
[sw3-Ethernet0/0/2]int g0/0/1
[sw3-GigabitEthernet0/0/1]port hybrid tagged vlan 2 to 6

2.5 R1

[r1]int g0/0/0
[r1-GigabitEthernet0/0/0]ip add 192.168.2.1 24
[r1-GigabitEthernet0/0/0]int g0/0/0.1
[r1-GigabitEthernet0/0/0.1]dot1q termination vid 2
[r1-GigabitEthernet0/0/0.1]ip add 192.168.1.1 24
[r1-GigabitEthernet0/0/0.1]arp broadcast enable
[r1-GigabitEthernet0/0/0.1]q
[r1]dhcp enable
[r1]ip pool a
[r1-ip-pool-a]network 192.168.1.0 ma 24
[r1-ip-pool-a]gateway-list 192.168.1.1
[r1-ip-pool-a]q
[r1]ip pool b
[r1-ip-pool-b]network 192.168.2.0 mask 24
[r1-ip-pool-b]gateway-list 192.168.2.1
[r1-ip-pool-b]q
[r1]int g0/0/0
[r1-GigabitEthernet0/0/0]dhcp select global
[r1-GigabitEthernet0/0/0]int g0/0/0.1
[r1-GigabitEthernet0/0/0.1]dhcp select global