【云原生】Ubuntu系统部署Kubernetes-Docker集群

最新推荐文章于 2024-09-02 18:23:03 发布

云教员

最新推荐文章于 2024-09-02 18:23:03 发布

阅读量680

点赞数 4

文章标签：云原生 ubuntu kubernetes K8S Docker 云计算世界最美技术

本文链接：https://blog.csdn.net/weixin_73059729/article/details/140764422

版权

Ubuntu部署 Kubernetes1.23

文章目录

Ubuntu部署 Kubernetes1.23

资源列表

操作系统	配置	主机名	IP	所需软件
Ubuntu 24	2C4G	master	192.168.93.139	Docker Ce、kube-apiserver、kube-controller-manager、kube-scheduler、kubelet、Etcd、kube-proxy
Ubuntu 24	2C4G	node1	192.168.93.143	Docker CE、kubectl、kube-proxy、Flnnel
Ubuntu 24	2C4G	node2	192.168.93.144	Docker CE、kubectl、kube-proxy、Flnnel

基础环境

修改主机名

sudo hostnamectl set-hostname master
sudo hostnamectl set-hostname node1
sudo hostnamectl set-hostname node2

切换root用户

sudo -i

绑定hosts解析

cat >> /etc/hosts << EOF
192.168.93.139 master
192.168.93.143 node1
192.168.93.144 node2
EOF

一、环境准备（三台主机都要执行）

在正式开始部署kubernetes集群之前，先要进行如下准备工作。基础环境相关配置操作，在三台主机master、node01、node02上都需要执行。

1.1、安装常用软件

# 更新软件仓库
sudo apt update


# 安装常用软件
sudo apt install vim lrzsz unzip wget net-tools tree bash-completion telnet -y

1.2、关闭交换分区

kubeadm不支持swap交换分区

# 临时关闭
swapoff -a


# 永久关闭
sed -i '/swap/s/^/#/' /etc/fstab

1.3、开启IPv4转发和内核优化

cat <<EOF | sudo tee /etc/sysctl.d/k8s.conf
net.bridge.bridge-nf-call-iptables  = 1
net.bridge.bridge-nf-call-ip6tables = 1
net.ipv4.ip_forward                 = 1
EOF
sudo sysctl --system

1.4、时间同步

sudo apt -y install ntpdate
ntpdate ntp.aliyun.com

二、安装Docker（三台主机都要执行）

所有节点都要操作
在Ubuntu系统中安装Docker时，官方推荐Ubuntu系统最好是64位，可以在终端执行uname -a命令查看当前系统是否位64位操作系统。

2.1、卸载残留Docker软件包

for pkg in docker.io docker-doc docker-compose docker-compose-v2 podman-docker containerd runc; do sudo apt-get remove $pkg; done

2.2、更新软件包

在终端中执行以下命令来更新Ubuntu软件包列表和已安装软件的版本升级

sudo apt update
sudo apt upgrade

2.3、安装Docker依赖

Docker在Ubuntu上依赖一些软件包，执行以下命令来安装这些依赖

apt-get -y install ca-certificates curl gnupg lsb-release

2.4、添加Docker官方GPG密钥

执行以下命令来添加Docker官方的GPG密钥

# 最终回显OK表示运行命令正确
curl -fsSL http://mirrors.aliyun.com/docker-ce/linux/ubuntu/gpg | sudo apt-key add -

2.5、添加Docker软件源

注意：该命令需要使用root权限
执行以下命令来添加Docker的软件源

# 需要管理员交互式按一下回车键
sudo add-apt-repository "deb [arch=amd64] http://mirrors.aliyun.com/docker-ce/linux/ubuntu $(lsb_release -cs) stable"

2.6、安装Docker

执行以下命令安装Docker

apt-get -y install docker-ce docker-ce-cli containerd.io

2.7、配置用户组（可选）

默认情况下，只有root用户和Docker组的用户才能运行Docker命令。我们可以将当前用户添加到Docker组，以避免每次使用时都需要使用sudo。
注意：重新登录才能使更改生效

sudo usermod -aG docker $USER

2.8、安装工具

apt-get -y install apt-transport-https ca-certificates curl software-properties-common

2.9、开启Docker

systemctl start docker
systemctl enable docker

2.10、配置Docker加速器

vim /etc/docker/daemon.json
{
    "registry-mirrors": [
        "https://registry.docker-cn.com",
        "http://hub-mirror.c.163.com",
        "https://docker.mirrors.ustc.edu.cn",
        "https://kfwkfulq.mirror.aliyuncs.com"
    ]
}


# 重启Docker
systemctl daemon-reload
systemctl restart docker

三、部署Kubernetes集群

准备好基础环境和Docker环境，下面就开始通过kubeadm来部署kubernetes集群

3.1、配置Kubernetes的YUM源（三台主机都要执行）

这里使用aliyun的源

# 安装软件包
apt-get install -y apt-transport-https ca-certificates curl

# 下载Kubernetes GPG密钥
curl -fsSLo /usr/share/keyrings/kubernetes-archive-keyring.gpg  https://mirrors.aliyun.com/kubernetes/apt/doc/apt-key.gpg

# 将GPG密钥添加到APT的密钥管理中
cat /usr/share/keyrings/kubernetes-archive-keyring.gpg |  sudo apt-key add -

# 指定软件仓库位置
echo "deb https://mirrors.aliyun.com/kubernetes/apt/ kubernetes-xenial main" | sudo tee /etc/apt/sources.list.d/kubernetes.list

# 更新软件仓库
apt-get update

3.2、查看Kubernetes可用版本

apt-cache madison kubeadm

3.3、安装kubeadm管理工具三台主机都要执行

kubectl：命令行管理工具、kubeadm：安装K8S集群工具、kubelet管理容器工具

# 安装1.23版本的Kubernetes，因为1.23以后Kubernetes就不再支持Docker做底层容器运行时
apt-get install -y kubelet=1.23.0-00 kubeadm=1.23.0-00 kubectl=1.23.0-00


# 锁定版本，防止自动升级
apt-mark hold kubelet kubeadm kubectl


# 查看版本
kubelet --version
kubeadm version
kubectl version

3.4、设置Kubelet开机启动三台主机都要执行

systemctl enable kubelet

四、kubeadm初始化集群

4.1、master节点生成初始化配置文件

root@master:~# kubeadm config print init-defaults > init-config.yaml

4.2、master节点修改初始化配置文件

root@master:~# vim init-config.yaml
apiVersion: kubeadm.k8s.io/v1beta3
bootstrapTokens:
- groups:
  - system:bootstrappers:kubeadm:default-node-token
  token: abcdef.0123456789abcdef
  ttl: 24h0m0s
  usages:
  - signing
  - authentication
kind: InitConfiguration
localAPIEndpoint:
  advertiseAddress: 192.168.93.139  # master节点IP地址
  bindPort: 6443
nodeRegistration:
  criSocket: /var/run/dockershim.sock
  imagePullPolicy: IfNotPresent
  name: master   # 如果使用域名保证可以解析，或直接使用IP地址
  taints: null
---
apiServer:
  timeoutForControlPlane: 4m0s
apiVersion: kubeadm.k8s.io/v1beta3
certificatesDir: /etc/kubernetes/pki
clusterName: kubernetes
controllerManager: {}
dns: {}
etcd:
  local:
    dataDir: /var/lib/etcd
imageRepository: registry.aliyuncs.com/google_containers # 默认地址国内无法访问，修改为国内地址
kind: ClusterConfiguration
kubernetesVersion: 1.23.0   # 指定kubernetes部署的版本
networking:
  dnsDomain: cluster.local
  serviceSubnet: 10.96.0.0/12   # service资源的网段，集群内部的网络
  podSubnet: 10.244.0.0/16  # 新增加Pod资源网段，需要与下面的pod网络插件地址一致
scheduler: {}

4.3、master节点拉取所需镜像

# 查看初始化需要的镜像
root@master:~# kubeadm config images list --config=init-config.yaml
registry.aliyuncs.com/google_containers/kube-apiserver:v1.23.0
registry.aliyuncs.com/google_containers/kube-controller-manager:v1.23.0
registry.aliyuncs.com/google_containers/kube-scheduler:v1.23.0
registry.aliyuncs.com/google_containers/kube-proxy:v1.23.0
registry.aliyuncs.com/google_containers/pause:3.6
registry.aliyuncs.com/google_containers/etcd:3.5.1-0
registry.aliyuncs.com/google_containers/coredns:v1.8.6


# 拉取所需镜像
root@master:~# kubeadm config images pull --config=init-config.yaml
[config/images] Pulled registry.aliyuncs.com/google_containers/kube-apiserver:v1.23.0
[config/images] Pulled registry.aliyuncs.com/google_containers/kube-controller-manager:v1.23.0
[config/images] Pulled registry.aliyuncs.com/google_containers/kube-scheduler:v1.23.0
[config/images] Pulled registry.aliyuncs.com/google_containers/kube-proxy:v1.23.0
[config/images] Pulled registry.aliyuncs.com/google_containers/pause:3.6
[config/images] Pulled registry.aliyuncs.com/google_containers/etcd:3.5.1-0
[config/images] Pulled registry.aliyuncs.com/google_containers/coredns:v1.8.6


# 查看拉取的镜像
oot@master:~# docker images
REPOSITORY                                                        TAG       IMAGE ID       CREATED       SIZE
registry.aliyuncs.com/google_containers/kube-apiserver            v1.23.0   e6bf5ddd4098   2 years ago   135MB
registry.aliyuncs.com/google_containers/kube-proxy                v1.23.0   e03484a90585   2 years ago   112MB
registry.aliyuncs.com/google_containers/kube-controller-manager   v1.23.0   37c6aeb3663b   2 years ago   125MB
registry.aliyuncs.com/google_containers/kube-scheduler            v1.23.0   56c5af1d00b5   2 years ago   53.5MB
registry.aliyuncs.com/google_containers/etcd                      3.5.1-0   25f8c7f3da61   2 years ago   293MB
registry.aliyuncs.com/google_containers/coredns                   v1.8.6    a4ca41631cc7   2 years ago   46.8MB
hello-world                                                       latest    feb5d9fea6a5   2 years ago   13.3kB
registry.aliyuncs.com/google_containers/pause                     3.6       6270bb605e12   2 years ago   683kB

4.4、master初始化集群

root@master:~# kubeadm init --config=init-config.yaml
[init] Using Kubernetes version: v1.23.0
[preflight] Running pre-flight checks
	[WARNING SystemVerification]: this Docker version is not on the list of validated versions: 27.1.1. Latest validated version: 20.10
[preflight] Pulling images required for setting up a Kubernetes cluster
[preflight] This might take a minute or two, depending on the speed of your internet connection
[preflight] You can also perform this action in beforehand using 'kubeadm config images pull'
[certs] Using certificateDir folder "/etc/kubernetes/pki"
[certs] Generating "ca" certificate and key
[certs] Generating "apiserver" certificate and key
[certs] apiserver serving cert is signed for DNS names [kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local master] and IPs [10.96.0.1 192.168.93.139]
[certs] Generating "apiserver-kubelet-client" certificate and key
[certs] Generating "front-proxy-ca" certificate and key
[certs] Generating "front-proxy-client" certificate and key
[certs] Generating "etcd/ca" certificate and key
[certs] Generating "etcd/server" certificate and key
[certs] etcd/server serving cert is signed for DNS names [localhost master] and IPs [192.168.93.139 127.0.0.1 ::1]
[certs] Generating "etcd/peer" certificate and key
[certs] etcd/peer serving cert is signed for DNS names [localhost master] and IPs [192.168.93.139 127.0.0.1 ::1]
[certs] Generating "etcd/healthcheck-client" certificate and key
[certs] Generating "apiserver-etcd-client" certificate and key
[certs] Generating "sa" key and public key
[kubeconfig] Using kubeconfig folder "/etc/kubernetes"
[kubeconfig] Writing "admin.conf" kubeconfig file
[kubeconfig] Writing "kubelet.conf" kubeconfig file
[kubeconfig] Writing "controller-manager.conf" kubeconfig file
[kubeconfig] Writing "scheduler.conf" kubeconfig file
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Starting the kubelet
[control-plane] Using manifest folder "/etc/kubernetes/manifests"
[control-plane] Creating static Pod manifest for "kube-apiserver"
[control-plane] Creating static Pod manifest for "kube-controller-manager"
[control-plane] Creating static Pod manifest for "kube-scheduler"
[etcd] Creating static Pod manifest for local etcd in "/etc/kubernetes/manifests"
[wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory "/etc/kubernetes/manifests". This can take up to 4m0s
[apiclient] All control plane components are healthy after 5.002861 seconds
[upload-config] Storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace
[kubelet] Creating a ConfigMap "kubelet-config-1.23" in namespace kube-system with the configuration for the kubelets in the cluster
NOTE: The "kubelet-config-1.23" naming of the kubelet ConfigMap is deprecated. Once the UnversionedKubeletConfigMap feature gate graduates to Beta the default name will become just "kubelet-config". Kubeadm upgrade will handle this transition transparently.
[upload-certs] Skipping phase. Please see --upload-certs
[mark-control-plane] Marking the node master as control-plane by adding the labels: [node-role.kubernetes.io/master(deprecated) node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]
[mark-control-plane] Marking the node master as control-plane by adding the taints [node-role.kubernetes.io/master:NoSchedule]
[bootstrap-token] Using token: abcdef.0123456789abcdef
[bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles
[bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to get nodes
[bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials
[bootstrap-token] configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token
[bootstrap-token] configured RBAC rules to allow certificate rotation for all node client certificates in the cluster
[bootstrap-token] Creating the "cluster-info" ConfigMap in the "kube-public" namespace
[kubelet-finalize] Updating "/etc/kubernetes/kubelet.conf" to point to a rotatable kubelet client certificate and key
[addons] Applied essential addon: CoreDNS
[addons] Applied essential addon: kube-proxy
#############################################################
Your Kubernetes control-plane has initialized successfully!
#############################################################
To start using your cluster, you need to run the following as a regular user:





#############################################################
  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config
#############################################################





Alternatively, if you are the root user, you can run:

  export KUBECONFIG=/etc/kubernetes/admin.conf

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
  https://kubernetes.io/docs/concepts/cluster-administration/addons/

Then you can join any number of worker nodes by running the following on each as root:
#############################################################
kubeadm join 192.168.93.139:6443 --token abcdef.0123456789abcdef \
	--discovery-token-ca-cert-hash sha256:0d52197239b2e78ab5bfcae2b0800881c32729b970452f183b018abc002c0256
#############################################################

4.5、master节点复制k8s认证文件到用户的home目录

root@master:~# mkdir -p $HOME/.kube
root@master:~# sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
root@master:~# sudo chown $(id -u):$(id -g) $HOME/.kube/config

4.6、Node节点加入集群

直接把master节点初始化之后的最后回显的token复制粘贴到node节点回车即可，无须做任何配置

# node1
root@node1:~# kubeadm join 192.168.93.139:6443 --token abcdef.0123456789abcdef \> --discovery-token-ca-cert-hash sha256:0d52197239b2e78ab5bfcae2b0800881c32729b970452f183b018abc002c0256
[preflight] Running pre-flight checks
	[WARNING SystemVerification]: this Docker version is not on the list of validated versions: 27.1.1. Latest validated version: 20.10
[preflight] Reading configuration from the cluster...
[preflight] FYI: You can look at this config file with 'kubectl -n kube-system get cm kubeadm-config -o yaml'
W0728 12:55:56.892027    8586 utils.go:69] The recommended value for "resolvConf" in "KubeletConfiguration" is: /run/systemd/resolve/resolv.conf; the provided value is: /run/systemd/resolve/resolv.conf
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Starting the kubelet
[kubelet-start] Waiting for the kubelet to perform the TLS Bootstrap...

This node has joined the cluster:
* Certificate signing request was sent to apiserver and a response was received.
* The Kubelet was informed of the new secure connection details.

Run 'kubectl get nodes' on the control-plane to see this node join the cluster.

# node2
root@node2:~# kubeadm join 192.168.93.139:6443 --token abcdef.0123456789abcdef \> --discovery-token-ca-cert-hash sha256:0d52197239b2e78ab5bfcae2b0800881c32729b970452f183b018abc002c0256
[preflight] Running pre-flight checks
	[WARNING SystemVerification]: this Docker version is not on the list of validated versions: 27.1.1. Latest validated version: 20.10
[preflight] Reading configuration from the cluster...
[preflight] FYI: You can look at this config file with 'kubectl -n kube-system get cm kubeadm-config -o yaml'
W0728 12:56:01.262467    9134 utils.go:69] The recommended value for "resolvConf" in "KubeletConfiguration" is: /run/systemd/resolve/resolv.conf; the provided value is: /run/systemd/resolve/resolv.conf
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Starting the kubelet
[kubelet-start] Waiting for the kubelet to perform the TLS Bootstrap...

This node has joined the cluster:
* Certificate signing request was sent to apiserver and a response was received.
* The Kubelet was informed of the new secure connection details.

Run 'kubectl get nodes' on the control-plane to see this node join the cluster.

4.7、在master主机查看节点状态

在初始化k8s-master时并没有网络相关的配置，所以无法跟node节点通信，因此状态都是“Not Ready”。但是通过kubeadm join加入的node节点已经在master上可以看到

root@master:~# kubectl get node
NAME     STATUS     ROLES                  AGE    VERSION
master   NotReady   control-plane,master   4m3s   v1.23.0
node1    NotReady   <none>                 93s    v1.23.0
node2    NotReady   <none>                 90s    v1.23.0

五、安装flannel网络插件

flannel是一个轻量级的网络插件，基于虚拟网络的方式，使用了多种后端实现，如基于Overlay的VXLAN和基于Host-Gateway的方式。它创建了一个覆盖整个集群的群集网络，使得Pod可以跨节点通信

5.1、安装flannel网络插件master

可以使用的网络插件有很多，本次使用flannel

root@master:~# kubectl apply -f kube-flannel.yaml 
namespace/kube-flannel created
clusterrole.rbac.authorization.k8s.io/flannel created
clusterrolebinding.rbac.authorization.k8s.io/flannel created
serviceaccount/flannel created
configmap/kube-flannel-cfg created
daemonset.apps/kube-flannel-ds created

5.2、查看节点状态

# 查看Node节点状态
root@master:~# kubectl get node
NAME     STATUS   ROLES                  AGE     VERSION
master   Ready    control-plane,master   6m31s   v1.23.0
node1    Ready    <none>                 4m1s    v1.23.0
node2    Ready    <none>                 3m58s   v1.23.0

# 查看所有Pod状态
root@master:~# kubectl get pod -A
NAMESPACE      NAME                             READY   STATUS    RESTARTS   AGE
kube-flannel   kube-flannel-ds-24zvx            1/1     Running   0          72s
kube-flannel   kube-flannel-ds-297b4            1/1     Running   0          72s
kube-flannel   kube-flannel-ds-x4zkl            1/1     Running   0          72s
kube-system    coredns-6d8c4cb4d-58lcm          1/1     Running   0          7m1s
kube-system    coredns-6d8c4cb4d-vqbw4          1/1     Running   0          7m1s
kube-system    etcd-master                      1/1     Running   0          7m14s
kube-system    kube-apiserver-master            1/1     Running   0          7m16s
kube-system    kube-controller-manager-master   1/1     Running   0          7m16s
kube-system    kube-proxy-bwsdq                 1/1     Running   0          4m47s
kube-system    kube-proxy-jsvmj                 1/1     Running   0          4m44s
kube-system    kube-proxy-znwcq                 1/1     Running   0          7m1s
kube-system    kube-scheduler-master            1/1     Running   0          7m15s

# 查看组件状态
root@master:~# kubectl get cs
Warning: v1 ComponentStatus is deprecated in v1.19+
NAME                 STATUS    MESSAGE                         ERROR
scheduler            Healthy   ok                              
controller-manager   Healthy   ok                              
etcd-0               Healthy   {"health":"true","reason":""}