网络类型实验

        

一：R5为ISP，配置IP地址

[r5]in s3/0/0
[r5-Serial3/0/0]ip ad	
[r5-Serial3/0/0]ip address 15.0.0.1 24
[r5-Serial3/0/0]int s4/0/0
[r5]int s4/0/0
[r5-Serial4/0/0]ip ad	
[r5-Serial4/0/0]ip address 45.0.0.1 24
[r5]int s3/0/1
[r5-Serial3/0/1]ip ad 	
[r5-Serial3/0/1]ip address 35.0.0.1 24
[r5]int 	
[r5]interface g0/0/0
[r5-GigabitEthernet0/0/0]ip ad	
[r5-GigabitEthernet0/0/0]ip address 25.0.0.1 24

2.r1与r5使用pap认证

[r5]aaa
[r5-aaa]lo	
[r5-aaa]local-user hua	
[r5-aaa]local-user huawei pa	
[r5-aaa]local-user huawei password ci	
[r5-aaa]local-user huawei password cipher 123456
Info: Add a new user.
[r5-aaa]lo	
[r5-aaa]local-user hua	
[r5-aaa]local-user huawei se	
[r5-aaa]local-user huawei service-type ppp
[r5-aaa]qu
[r5]int	
[r5]interface s3/0/0
[r5-Serial3/0/0]ppp aut	
[r5-Serial3/0/0]ppp authentication-mode pap
[r1-Serial4/0/0]ppp pap local-user huawei password cipher 123456

r2与r5使用chap认证

[R2]interface s4/0/0
[R2-Serial4/0/0]ip address 35.0.0.2 24
[R2]interface g0/0/0
[R2-GigabitEthernet0/0/0]ip address 192.168.3.1 24
[R5]aaa
[R5-aaa]local-user hhy password cipher 123
Info: Add a new user.	
[R5-aaa]local-user hhy service-type ppp
[R5]interface s3/0/1	
[R5-Serial3/0/1]ppp authentication-mode chap 

r3与r5hdlc封装

[r5-Serial4/0/0]link-protocol hdlc 
[r5-Serial4/0/0]ip address unnumbered interface LoopBack 0

r1/r2/r3构建MGRE环境

r1]interface t0/0/0
[r1-Tunnel0/0/0]ip address 192.168.6.1 24	
[r1-Tunnel0/0/0]tunnel-protocol gre p2mp 
[r1-Tunnel0/0/0]source 15.0.0.2
[R2]interface t0/0/0
[R2-Tunnel0/0/0]ip address 192.168.6.2 24
[R2-Tunnel0/0/0]tunnel-protocol gre p2mp 
[R2-Tunnel0/0/0]source s4/0/0
[R2-Tunnel0/0/0]nhrp entry 192.168.6.1 15.0.0.2 register 
[r3]interface t0/0/0
[r3-Tunnel0/0/0]ip address 192.168.6.3 24
[r3-Tunnel0/0/0]tunnel-protocol gre p2mp 
[r3-Tunnel0/0/0]nhrp entry 192.168.6.1 15.0.0.2 register

基于rip全网可达

以r1为例

[r1]rip 1
[r1-rip-1]version 2
[r1-rip-1]network 192.168.1.0
[r1-rip-1]network 192.168.5.0
[r1-rip-1]network 192.168.6.0