地址的配置

1.所有设备预配，改名r1 r2

---

<Huawei>sy	
<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.
[Huawei]
Oct 30 2022 11:32:40-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[0]:Interface GigabitEt
hernet0/0/0 has turned into UP state.
[Huawei]sy	
[Huawei]sysname r1
[r1]us	
[r1]user-bind
[r1]user-group
[r1]user-interface co	
[r1]user-interface console 0
[r1-ui-console0]co	
[r1-ui-console0]id	
[r1-ui-console0]idle-timeout 0 0
[r1-ui-console0]

 

<Huawei>sy	
<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.
[Huawei]sy	
[Huawei]sysname r2
[r2]us	
[r2]user-bind
[r2]user-group
[r2]user-interface co	
[r2]user-interface console 0
[r2-ui-console0]id	
[r2-ui-console0]idle-timeout 0 0
[r2-ui-console0]

2.r1使用密码加密，密码为jincheng

[r1-ui-console0]id	
[r1-ui-console0]idle-timeout 0 0
[r1-ui-console0]au	
[r1-ui-console0]authentication-mode pa	
[r1-ui-console0]authentication-mode password 
Please configure the login password (maximum length 16):jincheng

3.r2 使用用户名为jincheng管理权限15密码为xueyuan

r2使用用户名为xuesheng管理权限0密码为123

[r2]aaa
[r2-aaa]lo	
[r2-aaa]local-user jincheng pr	
[r2-aaa]local-user jincheng privilege le	
[r2-aaa]local-user jincheng privilege level 15 pa	
[r2-aaa]local-user jincheng privilege level 15 password ci	
[r2-aaa]local-user jincheng privilege level 15 password cipher xueyuan
Info: Add a new user.
[r2-aaa]lo	
[r2-aaa]local-user xuesheng pt	
[r2-aaa]local-user xuesheng pr	
[r2-aaa]local-user xuesheng privilege le	
[r2-aaa]local-user xuesheng privilege level 0 pa	
[r2-aaa]local-user xuesheng privilege level 0 password ci	
[r2-aaa]local-user xuesheng privilege level 0 password cipher 123
Info: Add a new user.

4.r1可以ping通r2使用的地址是192.168.1.0/24

[r1-GigabitEthernet0/0/0]ip ad	
[r1-GigabitEthernet0/0/0]ip address 192.168.1.1 24
Oct 30 2022 11:49:10-08:00 r1 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r1-GigabitEthernet0/0/0]
[r1-GigabitEthernet0/0/0]dis	
[r1-GigabitEthernet0/0/0]display this
[V200R003C00]
#
interface GigabitEthernet0/0/0
 ip address 192.168.1.1 255.255.255.0 
#
return		
[r1-GigabitEthernet0/0/0]dis	
[r1-GigabitEthernet0/0/0]discard
[r1-GigabitEthernet0/0/0]display ip	
[r1-GigabitEthernet0/0/0]display ip int	
[r1-GigabitEthernet0/0/0]display ip interface br	
[r1-GigabitEthernet0/0/0]display ip interface brief 
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
The number of interface that is UP in Physical is 2
The number of interface that is DOWN in Physical is 2
The number of interface that is UP in Protocol is 2
The number of interface that is DOWN in Protocol is 2

Interface                         IP Address/Mask      Physical   Protocol  
GigabitEthernet0/0/0              192.168.1.1/24       up         up        
GigabitEthernet0/0/1              unassigned           down       down      
GigabitEthernet0/0/2              unassigned           down       down      
NULL0                             unassigned           up         up(s)   

[r2]in	
[r2]info-center
[r2]interface g0/0/0
[r2-GigabitEthernet0/0/0]ip	
[r2-GigabitEthernet0/0/0]ip ad	
[r2-GigabitEthernet0/0/0]ip address 192.168.1.2 24
[r2-GigabitEthernet0/0/0]dis	
[r2-GigabitEthernet0/0/0]discard
[r2-GigabitEthernet0/0/0]display this
[V200R003C00]
#
interface GigabitEthernet0/0/0
 ip address 192.168.1.2 255.255.255.0 
#
return
[r2-GigabitEthernet0/0/0]qu	
[r2-GigabitEthernet0/0/0]quit 
[r2]

<r1>ping 192.168.1.2
  PING 192.168.1.2: 56  data bytes, press CTRL_C to break
    Reply from 192.168.1.2: bytes=56 Sequence=1 ttl=255 time=110 ms
    Reply from 192.168.1.2: bytes=56 Sequence=2 ttl=255 time=20 ms
    Reply from 192.168.1.2: bytes=56 Sequence=3 ttl=255 time=20 ms
    Reply from 192.168.1.2: bytes=56 Sequence=4 ttl=255 time=30 ms
    Reply from 192.168.1.2: bytes=56 Sequence=5 ttl=255 time=10 ms

  --- 192.168.1.2 ping statistics ---
    5 packet(s) transmitted
    5 packet(s) received
    0.00% packet loss
    round-trip min/avg/max = 10/38/110 ms