来源于：https://code.google.com/p/aspersa/
#!/bin/sh
# This program is part of Aspersa (http://code.google.com/p/aspersa/)
# ########################################################################
# A script to summarize system information in a nice way.
# Goals: work well on Linux; create a compact diff-able report that is
# easy to paste into a wiki or email, and easy to scan and compare too.
#
# Usage: $ wget -O- http://aspersa.googlecode.com/svn/trunk/summary |bash
# Options are set through the ASPERSA_SKIP environment variable. Set this
# variable to a comma-separated list of things you want to omit.
# Options:
# MOUNT: Don't print out mounted filesystems and disk fullness.
# NETWORK: Don't print out information on network controllers & config.
# PROCESS: Don't print out top processes and vmstat information.
#
# Authors:
# Baron Schwartz
# Kevin van Zonneveld (kvz@php.net || http://kevin.vanzonneveld.net)
# ########################################################################
# ########################################################################
# Globals, settings, helper functions
# ########################################################################
POSIXLY_CORRECT=1
export POSIXLY_CORRECT
# The awk code for fuzzy rounding. (It's used in a few places, so makes sense
# not to duplicate). It fuzzy-rounds the variable named fuzzy_var. It goes in
# steps of 5, 10, 25, then repeats by a factor of 10 larger (50, 100, 250), and
# so on, until it finds a number that's large enough. The pattern is slightly
# broken between the initial 1 and 50, because rounding to the nearest 2.5
# doesn't seem right to me.
fuzzy_formula='
rounded = 0;
if (fuzzy_var <= 10 ) {
rounded = 1;
}
factor = 1;
while ( rounded == 0 ) {
if ( fuzzy_var <= 50 * factor ) {
fuzzy_var = sprintf("%.0f", fuzzy_var / (5 * factor)) * 5 * factor;
rounded = 1;
}
else if ( fuzzy_var <= 100 * factor) {
fuzzy_var = sprintf("%.0f", fuzzy_var / (10 * factor)) * 10 * factor;
rounded = 1;
}
else if ( fuzzy_var <= 250 * factor) {
fuzzy_var = sprintf("%.0f", fuzzy_var / (25 * factor)) * 25 * factor;
rounded = 1;
}
factor = factor * 10;
}'
# Does fuzzy rounding: rounds to nearest interval, but the interval gets larger
# as the number gets larger. This is to make things easier to diff.
fuzz () {
echo $1 | $AP_AWK "{fuzzy_var=\$1; ${fuzzy_formula} print fuzzy_var;}"
}
# The temp files are for storing working results so we don't call commands many
# times (gives inconsistent results, maybe adds load on things I don't want to
# such as RAID controllers). They must not exist -- if they did, someone would
# symlink them to /etc/passwd and then run this program as root. Call this
# function with "rm" or "touch" as an argument.
temp_files() {
for file in /tmp/aspersa /tmp/aspersa2; do
case "$1" in
touch)
if ! touch "${file}"; then
echo "I can't make my temp file ${file}";
exit 1;
fi
;;
rm)
rm -f "${file}"
;;
esac
done
}
# Print a space-padded string into $line. Then translate spaces to hashes, and
# underscores to spaces. End result is a line of hashes with words at the
# start.
section () {
echo "$1" | awk '{l=sprintf("#_%-60s", $0 "_"); print l}' | sed -e 's/ /#/g' -e 's/_/ /g'
}
# Print a "name | value" line.
name_val() {
printf "%12s | %s\n" "$1" "$(echo $2)"
}
# Converts a value to units of power of 2. Arg 1: the value. Arg 2: precision (defaults to 2).
shorten() {
echo $@ | awk '{
unit = "k";
size = 1024;
val = $1;
prec = 2;
if ( $2 ~ /./ ) {
prec = $2;
}
if ( val >= 1099511627776 ) {
size = 1099511627776;
unit = "T";
}
else if ( val >= 1073741824 ) {
size = 1073741824;
unit = "G";
}
else if ( val >= 1048576 ) {
size = 1048576;
unit = "M";
}
printf "%." prec "f%s", val / size, unit;
}'
}
# ##############################################################################
# Function to take a file and collapse it into an aggregated list. This
# function works on $1, which it expects to be created with 'sort |
# uniq -c'. Leading whitespace is deleted. The result will look like
# "4xabc, 1xdef" Copy any changes to 'mysql-summary' too.
# ##############################################################################
group_concat () {
sed -e '{H; $!d}' -e 'x' -e 's/\n[[:space:]]*\([[:digit:]]*\)[[:space:]]*/, \1x/g' -e 's/[[:space:]][[:space:]]*/ /g' -e 's/, //' ${1}
# In words: save the whole file into the hold space,
# {H; $!d}
# Swap it back into the pattern space,
# x
# Join lines with a comma, delete leading whitespace, and put an 'x' between
# the number and the text that follows,
# s/\n[[:space:]]*\([[:digit:]]*\)[[:space:]]*/, \1x/g
# Collapse whitespace,
# s/[[:space:]][[:space:]]*/ /g
# And delete the leading comma-space.
# s/, //
}
# ##############################################################################
# Functions for parsing specific files and getting desired info from them.
# These are called from within main() and are separated so they can be tested
# easily. The calling convention is that the data they need to run is prepared
# first by putting it into /tmp/aspersa. Then code that's testing just needs to
# put sample data into /tmp/aspersa and call it.
# ##############################################################################
# ##############################################################################
# Parse Linux's /proc/cpuinfo, which should be stored in /tmp/aspersa.
# ##############################################################################
parse_proc_cpuinfo () {
# Physical processors are indicated by distinct 'physical id'. Virtual CPUs
# are indicated by paragraphs -- one per paragraph. We assume that all
# processors are identical, i.e. that there are not some processors with dual
# cores and some with quad cores.
virtual=$(grep -c ^processor /tmp/aspersa);
physical=$(grep 'physical id' /tmp/aspersa | sort -u | wc -l);
cores=$(grep 'cpu cores' /tmp/aspersa | head -n 1 | cut -d: -f2);
# Older kernel won't have 'physical id' or 'cpu cores'.
if [ "${physical}" = "0" ]; then physical=${virtual}; fi
if [ -z "${cores}" ]; then cores=0; fi
# Test for HTT; cannot trust the 'ht' flag. If physical * cores < virtual,
# then hyperthreading is in use.
cores=$((${cores} * ${physical}));
if [ ${cores} -gt 0 -a $cores -lt $virtual ]; then htt=yes; else htt=no; fi
name_val "Processors" "physical = ${physical}, cores = ${cores}, virtual = ${virtual}, hyperthreading = ${htt}"
awk -F: '/cpu MHz/{print $2}' /tmp/aspersa \
| sort | uniq -c > /tmp/aspersa2
name_val "Speeds" "$(group_concat /tmp/aspersa2)"
awk -F: '/model name/{print $2}' /tmp/aspersa \
| sort | uniq -c > /tmp/aspersa2
name_val "Models" "$(group_concat /tmp/aspersa2)"
awk -F: '/cache size/{print $2}' /tmp/aspersa \
| sort | uniq -c > /tmp/aspersa2
name_val "Caches" "$(group_concat /tmp/aspersa2)"
}
# ##############################################################################
# Parse sysctl -a output on FreeBSD, and format it as CPU info. The file is the
# first argument.
# ##############################################################################
parse_sysctl_cpu_freebsd() {
virtual="$(awk '/hw.ncpu/{print $2}' "$1")"
name_val "Processors" "virtual = ${virtual}"
name_val "Speeds" "$(awk '/hw.clockrate/{print $2}' "$1")"
name_val "Models" "$(awk -F: '/hw.model/{print substr($2, 2)}' "$1")"
}
# ##############################################################################
# Parse CPU info from psrinfo -v
# ##############################################################################
parse_psrinfo_cpus() {
name_val Processors $(grep -c 'Status of .* processor' "$1")
awk '/operates at/ {
start = index($0, " at ") + 4;
end = length($0) - start - 4
print substr($0, start, end);
}' "$1" | sort | uniq -c > /tmp/aspersa2
name_val "Speeds" "$(group_concat /tmp/aspersa2)"
}
# ##############################################################################
# Parse the output of 'free -b' plus the contents of /proc/meminfo
# ##############################################################################
parse_free_minus_b () {
physical=$(awk '/Mem:/{print $3}' "${1}")
swap=$(awk '/Swap:/{print $3}' "${1}")
virtual=$(shorten $(($physical + $swap)))
name_val Total $(shorten $(awk '/Mem:/{print $2}' "${1}"))
name_val Free $(shorten $(awk '/Mem:/{print $4}' "${1}"))
name_val Used "physical = $(shorten ${physical}), swap = $(shorten ${swap}), virtual = ${virtual}"
name_val Buffers $(shorten $(awk '/Mem:/{print $6}' "${1}"))
name_val Caches $(shorten $(awk '/Mem:/{print $7}' "${1}"))
name_val Dirty "$(awk '/Dirty:/ {print $2, $3}' "${1}")"
}
# ##############################################################################
# Parse FreeBSD memory info from sysctl output.
# ##############################################################################
parse_memory_sysctl_freebsd() {
physical=$(awk '/hw.realmem:/{print $2}' "${1}")
mem_hw=$(awk '/hw.physmem:/{print $2}' "${1}")
mem_used=$(awk '
/hw.physmem/ { mem_hw = $2; }
/vm.stats.vm.v_inactive_count/ { mem_inactive = $2; }
/vm.stats.vm.v_cache_count/ { mem_cache = $2; }
/vm.stats.vm.v_free_count/ { mem_free = $2; }
/hw.pagesize/ { pagesize = $2; }
END {
mem_inactive *= pagesize;
mem_cache *= pagesize;
mem_free *= pagesize;
print mem_hw - mem_inactive - mem_cache - mem_free;
}
' "$1");
name_val Total $(shorten ${mem_hw} 1)
name_val Virtual $(shorten ${physical} 1)
name_val Used $(shorten ${mem_used} 1)
}
# ##############################################################################
# Parse memory devices from the output of 'dmidecode', which should be stored in
# /tmp/aspersa.
# ##############################################################################
parse_dmidecode_mem_devices () {
echo " Locator Size Speed Form Factor Type Type Detail"
echo " ========= ======== ================= ============= ============= ==========="
# Print paragraphs containing 'Memory Device\n', extract the desired bits,
# concatenate them into one long line, then format as a table. The data
# comes out in this order for each paragraph:
# $2 Size 2048 MB
# $3 Form Factor <OUT OF SPEC>
# $4 Locator DIMM1
# $5 Type <OUT OF SPEC>
# $6 Type Detail Synchronous
# $7 Speed 667 MHz (1.5 ns)
sed -e '/./{H;$!d;}' \
-e 'x;/Memory Device\n/!d;' \
-e 's/: /:/g' \
-e 's/</{/g' \
-e 's/>/}/g' \
-e 's/[ \t]*\n/\n/g' \
/tmp/aspersa \
| awk -F: '/Size|Type|Form.Factor|Type.Detail|[^ ]Locator/{printf("|%s", $2)}/Speed/{print "|" $2}' \
| sed -e 's/No Module Installed/{EMPTY}/' \
| sort \
| awk -F'|' '{printf(" %-9s %-8s %-17s %-13s %-13s %-8s\n", $4, $2, $7, $3, $5, $6);}'
}
# ##############################################################################
# Parse the output of 'netstat -antp'
# ##############################################################################
parse_ip_s_link () {
echo " interface rx_bytes rx_packets rx_errors tx_bytes tx_packets tx_errors"
echo " ========= ========= ========== ========== ========== ========== =========="
awk "/^[1-9][0-9]*:/ {
save[\"iface\"] = substr(\$2, 0, index(\$2, \":\") - 1);
new = 1;
}
\$0 !~ /[^0-9 ]/ {
if ( new == 1 ) {
new = 0;
fuzzy_var = \$1; ${fuzzy_formula} save[\"bytes\"] = fuzzy_var;
fuzzy_var = \$2; ${fuzzy_formula} save[\"packs\"] = fuzzy_var;
fuzzy_var = \$3; ${fuzzy_formula} save[\"errs\"] = fuzzy_var;
}
else {
fuzzy_var = \$1; ${fuzzy_formula} tx_bytes = fuzzy_var;
fuzzy_var = \$2; ${fuzzy_formula} tx_packets = fuzzy_var;
fuzzy_var = \$3; ${fuzzy_formula} tx_errors = fuzzy_var;
printf \" %-8s %10d %10d %10d %10d %10d %10d\\n\", save[\"iface\"], save[\"bytes\"], save[\"packs\"], save[\"errs\"], tx_bytes, tx_packets, tx_errors;
}
}" $@
}
# ##############################################################################
# Parse the output of 'netstat -antp' which should be in /tmp/aspersa.
# ##############################################################################
parse_netstat () {
echo " Connections from remote IP addresses"
awk '$1 ~ /^tcp/ && $5 ~ /^[1-9]/ {
print substr($5, 0, index($5, ":") - 1);
}' /tmp/aspersa | sort | uniq -c \
| awk "{
fuzzy_var=\$1;
${fuzzy_formula}
printf \" %-15s %5d\\n\", \$2, fuzzy_var;
}" \
| sort -n -t . -k 1,1 -k 2,2 -k 3,3 -k 4,4
echo " Connections to local IP addresses"
awk '$1 ~ /^tcp/ && $5 ~ /^[1-9]/ {
print substr($4, 0, index($4, ":") - 1);
}' /tmp/aspersa | sort | uniq -c \
| awk "{
fuzzy_var=\$1;
${fuzzy_formula}
printf \" %-15s %5d\\n\", \$2, fuzzy_var;
}" \
| sort -n -t . -k 1,1 -k 2,2 -k 3,3 -k 4,4
echo " Connections to top 10 local ports"
awk '$1 ~ /^tcp/ && $5 ~ /^[1-9]/ {
print substr($4, index($4, ":") + 1);
}' /tmp/aspersa | sort | uniq -c | sort -rn | head -n10 \
| awk "{
fuzzy_var=\$1;
${fuzzy_formula}
printf \" %-15s %5d\\n\", \$2, fuzzy_var;
}" | sort
echo " States of connections"
awk '$1 ~ /^tcp/ {
print $6;
}' /tmp/aspersa | sort | uniq -c | sort -rn \
| awk "{
fuzzy_var=\$1;
${fuzzy_formula}
printf \" %-15s %5d\\n\", \$2, fuzzy_var;
}" | sort
}
# ##############################################################################
# Parse the joined output of 'mount' and 'df -hP'. $1 = file; $2 = ostype.
# ##############################################################################
parse_filesystems () {
# Filesystem names and mountpoints can be very long. We try to align things
# as nicely as possible by making columns only as wide as needed. This
# requires two passes through the file. The first pass finds the max size of
# these columns and prints out a printf spec, and the second prints out the
# file nicely aligned.
cat > /tmp/aspersa.awk <<-EOF
BEGIN {
device = 10;
fstype = 4;
options = 4;
}
/./ {
f_device = \$1;
f_fstype = \$10;
f_options = substr(\$11, 2, length(\$11) - 2);
if ( "$2" == "FreeBSD" ) {
f_fstype = substr(\$9, 2, length(\$9) - 2);
f_options = substr(\$0, index(\$0, ",") + 2);
f_options = substr(f_options, 1, length(f_options) - 1);
}
if ( length(f_device) > device ) {
device=length(f_device);
}
if ( length(f_fstype) > fstype ) {
fstype=length(f_fstype);
}
if ( length(f_options) > options ) {
options=length(f_options);
}
}
END{
print "%-" device "s %5s %4s %-" fstype "s %-" options "s %s";
}
EOF
spec="$( awk -f /tmp/aspersa.awk "$1" )";
#awk -f /tmp/aspersa.awk "$1"
#return;
cat > /tmp/aspersa.awk <<-EOF
BEGIN {
spec=" ${spec}\\n";
printf spec, "Filesystem", "Size", "Used", "Type", "Opts", "Mountpoint";
}
{
f_fstype = \$10;
f_options = substr(\$11, 2, length(\$11) - 2);
if ( "$2" == "FreeBSD" ) {
f_fstype = substr(\$9, 2, length(\$9) - 2);
f_options = substr(\$0, index(\$0, ",") + 2);
f_options = substr(f_options, 1, length(f_options) - 1);
}
printf spec, \$1, \$2, \$5, f_fstype, f_options, \$6;
}
EOF
awk -f /tmp/aspersa.awk "$1"
}
# ##############################################################################
# Parse the output of fdisk -l, which should be in /tmp/aspersa; there might be
# multiple fdisk -l outputs in the file.
# ##############################################################################
parse_fdisk () {
awk '
BEGIN {
format="%-12s %4s %10s %10s %18s\n";
printf(format, "Device", "Type", "Start", "End", "Size");
printf(format, "============", "====", "==========", "==========", "==================");
}
/Disk.*bytes/ {
disk = substr($2, 1, length($2) - 1);
size = $5;
printf(format, disk, "Disk", "", "", size);
}
/Units/ {
units = $9;
}
/^\/dev/ {
if ( $2 == "*" ) {
start = $3;
end = $4;
}
else {
start = $2;
end = $3;
}
printf(format, $1, "Part", start, end, sprintf("%.0f", (end - start) * units));
}
' /tmp/aspersa
}
# ##############################################################################
# Parse the output of dmesg, which should be in /tmp/aspersa, and detect
# virtualization.
# ##############################################################################
parse_virtualization_dmesg () {
if grep -qi -e vmware -e vmxnet -e 'paravirtualized kernel on vmi' /tmp/aspersa; then
echo "VMWare";
elif grep -qi -e 'paravirtualized kernel on xen' -e 'Xen virtual console' /tmp/aspersa; then
echo "Xen";
elif grep -qi qemu /tmp/aspersa; then
echo "QEmu";
elif grep -qi 'paravirtualized kernel on KVM' /tmp/aspersa; then
echo "KVM";
elif grep -q VBOX /tmp/aspersa; then
echo "VirtualBox";
elif grep -qi 'hd.: Virtual .., ATA.*drive' /tmp/aspersa; then
echo "Microsoft VirtualPC";
fi
}
# ##############################################################################
# Try to figure out if a system is a guest by looking at prtdiag, smbios, etc.
# ##############################################################################
parse_virtualization_generic() {
if grep -i -e virtualbox "$1" >/dev/null; then
echo VirtualBox
elif grep -i -e vmware "$1" >/dev/null; then
echo VMWare
fi
}
# ##############################################################################
# Parse the output of lspci, which should be in /tmp/aspersa, and detect
# Ethernet cards.
# ##############################################################################
parse_ethernet_controller_lspci () {
grep -i ethernet /tmp/aspersa | cut -d: -f3 | while read line; do
name_val Controller "${line}"
done
}
# ##############################################################################
# Parse the output of lspci, which should be in /tmp/aspersa, and detect RAID
# controllers.
# ##############################################################################
parse_raid_controller_lspci () {
if grep -q "RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS" /tmp/aspersa; then
echo 'LSI Logic MegaRAID SAS'
elif grep -q "Fusion-MPT SAS" /tmp/aspersa; then
echo 'Fusion-MPT SAS'
elif grep -q "RAID bus controller: LSI Logic / Symbios Logic Unknown" /tmp/aspersa; then
echo 'LSI Logic Unknown'
elif grep -q "RAID bus controller: Adaptec AAC-RAID" /tmp/aspersa; then
echo 'AACRAID'
elif grep -q "3ware [0-9]* Storage Controller" /tmp/aspersa; then
echo '3Ware'
elif grep -q "Hewlett-Packard Company Smart Array" /tmp/aspersa; then
echo 'HP Smart Array'
elif grep -q " RAID bus controller: " /tmp/aspersa; then
awk -F: '/RAID bus controller\:/ {print $3" "$5" "$6}' /tmp/aspersa
fi
}
# ##############################################################################
# Parse the output of dmesg, which should be in /tmp/aspersa, and detect RAID
# controllers.
# ##############################################################################
parse_raid_controller_dmesg () {
pat='scsi[0-9].*: .*'
if grep -qi "${pat}megaraid" /tmp/aspersa; then
echo 'LSI Logic MegaRAID SAS'
elif grep -q "Fusion MPT SAS" /tmp/aspersa; then
echo 'Fusion-MPT SAS'
elif grep -q "${pat}aacraid" /tmp/aspersa; then
echo 'AACRAID'
elif grep -q "${pat}3ware [0-9]* Storage Controller" /tmp/aspersa; then
echo '3Ware'
fi
}
# ##############################################################################
# Parse the output of "hpacucli ctrl all show config", which should be stored in
# /tmp/aspersa
# ##############################################################################
parse_hpacucli () {
grep 'logicaldrive\|physicaldrive' /tmp/aspersa
}
# ##############################################################################
# Parse the output of arcconf, which should be stored in /tmp/aspersa
# ##############################################################################
parse_arcconf () {
model=$(awk -F: '/Controller Model/{print $2}' /tmp/aspersa)
chan="$(awk -F: '/Channel description/{print $2}' /tmp/aspersa)"
cache="$(awk -F: '/Installed memory/{print $2}' /tmp/aspersa)"
status="$(awk -F: '/Controller Status/{print $2}' /tmp/aspersa)"
name_val Specs "${model/ /},${chan},${cache} cache,${status}"
battery=$(grep -A5 'Controller Battery Info' /tmp/aspersa \
| awk '/Capacity remaining/ {c=$4}
/Status/ {s=$3}
/Time remaining/ {t=sprintf("%dd%dh%dm", $7, $9, $11)}
END {printf("%d%%, %s remaining, %s", c, t, s)}')
name_val Battery "${battery}"
# ###########################################################################
# Logical devices
# ###########################################################################
echo
echo " LogicalDev Size RAID Disks Stripe Status Cache"
echo " ========== ========= ==== ===== ====== ======= ======="
for dev in $(awk '/Logical device number/{print $4}' /tmp/aspersa); do
sed -n -e "/^Logical device .* ${dev}$/,/^$\|^Logical device number/p" \
/tmp/aspersa \
| awk '
/Logical device name/ {d=$5}
/Size/ {z=$3 " " $4}
/RAID level/ {r=$4}
/Group [0-9]/ {g++}
/Stripe-unit size/ {p=$4 " " $5}
/Status of logical/ {s=$6}
/Write-cache mode.*Ena.*write-back/ {c="On (WB)"}
/Write-cache mode.*Ena.*write-thro/ {c="On (WT)"}
/Write-cache mode.*Disabled/ {c="Off"}
END {
printf(" %-10s %-9s %4d %5d %-6s %-7s %-7s\n",
d, z, r, g, p, s, c);
}'
done
# ###########################################################################
# Physical devices
# ###########################################################################
echo
echo " PhysiclDev State Speed Vendor Model Size Cache"
echo " ========== ======= ============= ======= ============ =========== ======="
# Find the paragraph with physical devices, tabularize with assoc arrays.
tempresult=""
sed -n -e '/Physical Device information/,/^$/p' /tmp/aspersa \
| awk -F: '
/Device #[0-9]/ {
device=substr($0, index($0, "#"));
devicenames[device]=device;
}
/Device is a/ {
devices[device ",isa"] = substr($0, index($0, "is a") + 5);
}
/State/ {
devices[device ",state"] = substr($2, 2);
}
/Transfer Speed/ {
devices[device ",speed"] = substr($2, 2);
}
/Vendor/ {
devices[device ",vendor"] = substr($2, 2);
}
/Model/ {
devices[device ",model"] = substr($2, 2);
}
/Size/ {
devices[device ",size"] = substr($2, 2);
}
/Write Cache/ {
if ( $2 ~ /Enabled .write-back./ )
devices[device ",cache"] = "On (WB)";
else
if ( $2 ~ /Enabled .write-th/ )
devices[device ",cache"] = "On (WT)";
else
devices[device ",cache"] = "Off";
}
END {
for ( device in devicenames ) {
if ( devices[device ",isa"] ~ /Hard drive/ ) {
printf(" %-10s %-7s %-13s %-7s %-12s %-11s %-7s\n",
devices[device ",isa"],
devices[device ",state"],
devices[device ",speed"],
devices[device ",vendor"],
devices[device ",model"],
devices[device ",size"],
devices[device ",cache"]);
}
}
}'
}
# ##############################################################################
# Parse the output of "lsiutil -i -s" from /tmp/aspersa
# ##############################################################################
parse_fusionmpt_lsiutil () {
echo
awk '/LSI.*Firmware/ { print " ", $0 }' /tmp/aspersa
grep . /tmp/aspersa | sed -n -e '/B___T___L/,$ {s/^/ /; p}'
}
# ##############################################################################
# Parse the output of MegaCli64 -AdpAllInfo -aALL from /tmp/aspersa.
# ##############################################################################
parse_lsi_megaraid_adapter_info () {
name=$(awk -F: '/Product Name/{print substr($2, 2)}' /tmp/aspersa);
int=$(awk '/Host Interface/{print $4}' /tmp/aspersa);
prt=$(awk '/Number of Backend Port/{print $5}' /tmp/aspersa);
bbu=$(awk '/^BBU :/{print $3}' /tmp/aspersa);
mem=$(awk '/Memory Size/{print $4}' /tmp/aspersa);
vdr=$(awk '/Virtual Drives/{print $4}' /tmp/aspersa);
dvd=$(awk '/Degraded/{print $3}' /tmp/aspersa);
phy=$(awk '/^ Disks/{print $3}' /tmp/aspersa);
crd=$(awk '/Critical Disks/{print $4}' /tmp/aspersa);
fad=$(awk '/Failed Disks/{print $4}' /tmp/aspersa);
name_val Model "${name}, ${int} interface, ${prt} ports"
name_val Cache "${mem} Memory, BBU ${bbu}"
}
# ##############################################################################
# Parse the output (saved in /tmp/aspersa) of
# /opt/MegaRAID/MegaCli/MegaCli64 -AdpBbuCmd -GetBbuStatus -aALL
# ##############################################################################
parse_lsi_megaraid_bbu_status () {
charge=$(awk '/Relative State/{print $5}' /tmp/aspersa);
temp=$(awk '/^Temperature/{print $2}' /tmp/aspersa);
soh=$(awk '/isSOHGood:/{print $2}' /tmp/aspersa);
name_val BBU "${charge}% Charged, Temperature ${temp}C, isSOHGood=${soh}"
}
# ##############################################################################
# Parse physical devices from the output (saved in /tmp/aspersa) of
# /opt/MegaRAID/MegaCli/MegaCli64 -LdPdInfo -aALL
# OR, it will also work with the output of
# /opt/MegaRAID/MegaCli/MegaCli64 -PDList -aALL
# ##############################################################################
parse_lsi_megaraid_devices () {
echo
echo " PhysiclDev Type State Errors Vendor Model Size"
echo " ========== ==== ======= ====== ======= ============ ==========="
for dev in $(awk '/Device Id/{print $3}' /tmp/aspersa); do
sed -e '/./{H;$!d;}' -e "x;/Device Id: ${dev}/!d;" /tmp/aspersa \
| awk '
/Media Type/ {d=substr($0, index($0, ":") + 2)}
/PD Type/ {t=$3}
/Firmware state/ {s=$3}
/Media Error Count/ {me=$4}
/Other Error Count/ {oe=$4}
/Predictive Failure Count/ {pe=$4}
/Inquiry Data/ {v=$3; m=$4;}
/Raw Size/ {z=$3}
END {
printf(" %-10s %-4s %-7s %6s %-7s %-12s %-7s\n",
substr(d, 0, 10), t, s, me "/" oe "/" pe, v, m, z);
}'
done
}
# ##############################################################################
# Parse virtual devices from the output (saved in /tmp/aspersa) of
# /opt/MegaRAID/MegaCli/MegaCli64 -LdPdInfo -aALL
# OR, it will also work with the output of
# /opt/MegaRAID/MegaCli/MegaCli64 -LDInfo -Lall -aAll
# ##############################################################################
parse_lsi_megaraid_virtual_devices () {
# Somewhere on the Internet, I found the following guide to understanding the
# RAID level, but I don't know the source anymore.
# Primary-0, Secondary-0, RAID Level Qualifier-0 = 0
# Primary-1, Secondary-0, RAID Level Qualifier-0 = 1
# Primary-5, Secondary-0, RAID Level Qualifier-3 = 5
# Primary-1, Secondary-3, RAID Level Qualifier-0 = 10
# I am not sure if this is always correct or not (it seems correct). The
# terminology MegaRAID uses is not clear to me, and isn't documented that I
# am aware of. Anyone who can clarify the above, please contact me.
echo
echo " VirtualDev Size RAID Level Disks SpnDpth Stripe Status Cache"
echo " ========== ========= ========== ===== ======= ====== ======= ========="
awk '
/^Virtual Disk:/ {
device = $3;
devicenames[device] = device;
}
/Number Of Drives/ {
devices[device ",numdisks"] = substr($0, index($0, ":") + 1);
}
/^Name:/ {
devices[device ",name"] = $2 > "" ? $2 : "(no name)";
}
/RAID Level/ {
devices[device ",primary"] = substr($3, index($3, "-") + 1, 1);
devices[device ",secondary"] = substr($4, index($4, "-") + 1, 1);
devices[device ",qualifier"] = substr($NF, index($NF, "-") + 1, 1);
}
/Span Depth/ {
devices[device ",spandepth"] = substr($2, index($2, ":") + 1);
}
/Number of Spans/ {
devices[device ",numspans"] = $4;
}
/^Size:/ {
devices[device ",size"] = substr($0, index($0, ":") + 1);
}
/^State:/ {
devices[device ",state"] = $2;
}
/^Stripe Size:/ {
devices[device ",stripe"] = $3;
}
/^Current Cache Policy/ {
devices[device ",wpolicy"] = $4 ~ /WriteBack/ ? "WB" : "WT";
devices[device ",rpolicy"] = $5 ~ /ReadAheadNone/ ? "no RA" : "RA";
}
END {
for ( device in devicenames ) {
raid = 0;
if ( devices[device ",primary"] == 1 ) {
raid = 1;
if ( devices[device ",secondary"] == 3 ) {
raid = 10;
}
}
else {
if ( devices[device ",primary"] == 5 ) {
raid = 5;
}
}
printf(" %-10s %-9s %-10s %5d %7s %6s %-7s %s\n",
device devices[device ",name"],
devices[device ",size"],
raid " (" devices[device ",primary"] "-" devices[device ",secondary"] "-" devices[device ",qualifier"] ")",
devices[device ",numdisks"],
devices[device ",spandepth"] "-" devices[device ",numspans"],
devices[device ",stripe"], devices[device ",state"],
devices[device ",wpolicy"] ", " devices[device ",rpolicy"]);
}
}' /tmp/aspersa
}
# ##############################################################################
# Simplifies vmstat and aligns it nicely. We don't need the memory stats, the
# system activity is enough.
# ##############################################################################
format_vmstat () {
cat > /tmp/aspersa.awk <<-EOF
BEGIN {
format = " %2s %2s %4s %4s %5s %5s %6s %6s %3s %3s %3s %3s %3s\n";
}
/procs/ {
print " procs ---swap-- -----io---- ---system---- --------cpu--------";
}
/bo/ {
printf format, "r", "b", "si", "so", "bi", "bo", "ir", "cs", "us", "sy", "il", "wa", "st";
}
\$0 !~ /r/ {
fuzzy_var = \$1; ${fuzzy_formula} r = fuzzy_var;
fuzzy_var = \$2; ${fuzzy_formula} b = fuzzy_var;
fuzzy_var = \$7; ${fuzzy_formula} si = fuzzy_var;
fuzzy_var = \$8; ${fuzzy_formula} so = fuzzy_var;
fuzzy_var = \$9; ${fuzzy_formula} bi = fuzzy_var;
fuzzy_var = \$10; ${fuzzy_formula} bo = fuzzy_var;
fuzzy_var = \$11; ${fuzzy_formula} ir = fuzzy_var;
fuzzy_var = \$12; ${fuzzy_formula} cs = fuzzy_var;
fuzzy_var = \$13; us = fuzzy_var;
fuzzy_var = \$14; sy = fuzzy_var;
fuzzy_var = \$15; il = fuzzy_var;
fuzzy_var = \$16; wa = fuzzy_var;
fuzzy_var = \$17; st = fuzzy_var;
printf format, r, b, si, so, bi, bo, ir, cs, us, sy, il, wa, st;
}
EOF
awk -f /tmp/aspersa.awk /tmp/aspersa
}
# ##############################################################################
# The main() function is called at the end of the script. This makes it
# testable. Major bits of parsing are separated into functions for testability.
# As a general rule, we cannot 'cp' files from /proc, because they might be
# empty afterwards. (I've seen 'cp /proc/cpuinfo' create an empty file.) But
# 'cat' works okay.
# ##############################################################################
main () {
# Begin by setting the $PATH to include some common locations that are not
# always in the $PATH, including the "sbin" locations, and some common
# locations for proprietary management software, such as RAID controllers.
export PATH="${PATH}:/usr/local/bin:/usr/bin:/bin:/usr/libexec"
export PATH="${PATH}:/usr/local/sbin:/usr/sbin:/sbin"
export PATH="${PATH}:/usr/StorMan/:/opt/MegaRAID/MegaCli/";
# Set up temporary files.
temp_files "rm"
temp_files "touch"
section Aspersa_System_Summary_Report
# ########################################################################
# Grab a bunch of stuff and put it into temp files for later.
# ########################################################################
sysctl -a > /tmp/aspersa.sysctl 2>/dev/null
# ########################################################################
# General date, time, load, etc
# ########################################################################
platform="$(uname -s)"
name_val "Date" "`date -u +'%F %T UTC'` (local TZ: `date +'%Z %z'`)"
name_val "Hostname" "$(uname -n)"
name_val "Uptime" "$(uptime | awk '{print substr($0, index($0, "up") + 3)}')"
if which dmidecode > /dev/null 2>&1; then
vendor="$(dmidecode -s system-manufacturer 2>/dev/null | sed 's/ *$//g')"
if [ "${vendor}" ]; then
product="$(dmidecode -s system-product-name 2>/dev/null | sed 's/ *$//g')"
version="$(dmidecode -s system-version 2>/dev/null | sed 's/ *$//g')"
chassis="$(dmidecode -s chassis-type 2>/dev/null | sed 's/ *$//g')"
system="${vendor}; ${product}; v${version} (${chassis})"
name_val "System" "${system}";
servicetag="$(dmidecode -s system-serial-number 2>/dev/null | sed 's/ *$//g')"
name_val "Service Tag" "${servicetag:-Not found}";
fi
fi
name_val "Platform" "${platform}"
if [ "${platform}" = "SunOS" ]; then
if which zonename >/dev/null 2>&1 ; then
name_val "Zonename" "$(zonename)"
fi
fi
# Try to find all sorts of different files that say what the release is.
if [ "${platform}" = "Linux" ]; then
kernel="$(uname -r)"
if [ -e /etc/fedora-release ]; then
release=$(cat /etc/fedora-release);
elif [ -e /etc/redhat-release ]; then
release=$(cat /etc/redhat-release);
elif [ -e /etc/system-release ]; then
release=$(cat /etc/system-release);
elif which lsb_release >/dev/null 2>&1; then
release="$(lsb_release -ds) ($(lsb_release -cs))"
elif [ -e /etc/lsb-release ]; then
release=$(grep DISTRIB_DESCRIPTION /etc/lsb-release |awk -F'=' '{print $2}' |sed 's#"##g');
elif [ -e /etc/debian_version ]; then
release="Debian-based version $(cat /etc/debian_version)";
if [ -e /etc/apt/sources.list ]; then
code=`cat /etc/apt/sources.list |awk '/^deb/ {print $3}' |awk -F/ '{print $1}'| awk 'BEGIN {FS="|"}{print $1}' | sort | uniq -c | sort -rn |head -n1 |awk '{print $2}'`
release="${release} (${code})"
fi
elif ls /etc/*release >/dev/null 2>&1; then
if grep -q DISTRIB_DESCRIPTION /etc/*release; then
release=$(grep DISTRIB_DESCRIPTION /etc/*release | head -n1);
else
release=$(cat /etc/*release | head -n1);
fi
fi
elif [ "${platform}" = "FreeBSD" ]; then
release="$(uname -r)"
kernel="$(sysctl -n kern.osrevision)"
elif [ "${platform}" = "SunOS" ]; then
release="$(head -n1 /etc/release)"
if [ -z "${release}" ]; then
release="$(uname -r)"
fi
kernel="$(uname -v)"
fi
name_val Release "${release}"
name_val Kernel "${kernel}"
CPU_ARCH='32-bit'
OS_ARCH='32-bit'
if [ "${platform}" = "Linux" ]; then
if grep -q ' lm ' /proc/cpuinfo; then
CPU_ARCH='64-bit'
fi
elif [ "${platform}" = "FreeBSD" ]; then
if sysctl hw.machine_arch | grep -v 'i[36]86' >/dev/null; then
CPU_ARCH='64-bit'
fi
elif [ "${platform}" = "SunOS" ]; then
if isainfo -b | grep 64 >/dev/null ; then
CPU_ARCH="64-bit"
fi
fi
if file /bin/sh | grep '64-bit' >/dev/null; then
OS_ARCH='64-bit'
fi
name_val "Architecture" "CPU = $CPU_ARCH, OS = $OS_ARCH"
# Threading library
if [ "${platform}" = "Linux" ]; then
name_val Threading "$(getconf GNU_LIBPTHREAD_VERSION)"
fi
if [ -x /lib/libc.so.6 ]; then
name_val "Compiler" "$(/lib/libc.so.6 | grep 'Compiled by' | cut -c13-)"
fi
if [ "${platform}" = "Linux" ]; then
if getenforce >/dev/null 2>&1; then
getenforce="$(getenforce 2>&1)";
fi
name_val "SELinux" "${getenforce:-No SELinux detected}";
fi
# We look in dmesg for virtualization information first, because it's often
# available to non-root users and usually has telltale signs. It's most
# reliable to look at /var/log/dmesg if possible. There are a number of
# other ways to find out if a system is virtualized.
cat /var/log/dmesg > /tmp/aspersa 2>/dev/null
if [ ! -s /tmp/aspersa ]; then
dmesg > /tmp/aspersa 2>/dev/null
fi
if [ -s /tmp/aspersa ]; then
virt="$(parse_virtualization_dmesg)"
fi
if [ -z "${virt}" ]; then
if which lspci >/dev/null 2>&1; then
lspci > /tmp/aspersa 2>/dev/null
if grep -qi virtualbox /tmp/aspersa; then
virt=VirtualBox
elif grep -qi vmware /tmp/aspersa; then
virt=VMWare
elif [ -e /proc/user_beancounters ]; then
virt="OpenVZ/Virtuozzo"
fi
fi
elif [ "${platform}" = "FreeBSD" ]; then
if ps -o stat | grep J ; then
virt="FreeBSD Jail"
fi
elif [ "${platform}" = "SunOS" ]; then
if which prtdiag >/dev/null 2>&1 && prtdiag > /tmp/aspersa.prtdiag 2>/dev/null; then
virt="$(parse_virtualization_generic /tmp/aspersa.prtdiag)"
elif which smbios >/dev/null 2>&1 && smbios > /tmp/aspersa.smbios 2>/dev/null; then
virt="$(parse_virtualization_generic /tmp/aspersa.smbios)"
fi
fi
name_val Virtualized "${virt:-No virtualization detected}"
# ########################################################################
# Processor/CPU, Memory, Swappiness, dmidecode
# ########################################################################
section Processor
if [ -f /proc/cpuinfo ]; then
cat /proc/cpuinfo > /tmp/aspersa 2>/dev/null
parse_proc_cpuinfo
elif [ "${platform}" = "FreeBSD" ]; then
parse_sysctl_cpu_freebsd /tmp/aspersa.sysctl
elif [ "${platform}" = "SunOS" ]; then
psrinfo -v > /tmp/aspersa
parse_psrinfo_cpus /tmp/aspersa
# TODO: prtconf -v actually prints the CPU model name etc.
fi
section Memory
if [ "${platform}" = "Linux" ]; then
free -b > /tmp/aspersa
cat /proc/meminfo >> /tmp/aspersa
parse_free_minus_b /tmp/aspersa
elif [ "${platform}" = "FreeBSD" ]; then
parse_memory_sysctl_freebsd /tmp/aspersa.sysctl
elif [ "${platform}" = "SunOS" ]; then
name_val Memory "$(prtconf | awk -F: '/Memory/{print $2}')"
fi
rss=$(ps -eo rss 2>/dev/null | awk '/[0-9]/{total += $1 * 1024} END {print total}')
name_val UsedRSS "$(shorten ${rss} 1)"
if [ "${platform}" = "Linux" ]; then
name_val Swappiness "$(sysctl vm.swappiness 2>&1)"
name_val DirtyPolicy "$(sysctl vm.dirty_ratio 2>&1), $(sysctl vm.dirty_background_ratio 2>&1)"
if sysctl vm.dirty_bytes > /dev/null 2>&1; then
name_val DirtyStatus "$(sysctl vm.dirty_bytes 2>&1), $(sysctl vm.dirty_background_bytes 2>&1)"
fi
fi
if which dmidecode >/dev/null 2>&1 && dmidecode > /tmp/aspersa 2>/dev/null; then
parse_dmidecode_mem_devices
fi
# ########################################################################
# Disks, RAID, Filesystems
# ########################################################################
# TODO: Add info about software RAID
if echo "${ASPERSA_SKIP}" | grep -v MOUNT >/dev/null; then
if [ "${platform}" != "SunOS" ]; then
section "Mounted_Filesystems"
cmd="df -h"
if [ "${platform}" = "Linux" ]; then
cmd="df -h -P"
fi
$cmd | sort > /tmp/aspersa2
mount | sort | join /tmp/aspersa2 - > /tmp/aspersa
parse_filesystems /tmp/aspersa "${platform}"
fi
fi
if [ "${platform}" = "Linux" ]; then
section "Disk_Schedulers_And_Queue_Size"
echo "" > /tmp/aspersa
for disk in $(ls /sys/block/ | grep -v -e ram -e loop -e 'fd[0-9]'); do
if [ -e "/sys/block/${disk}/queue/scheduler" ]; then
name_val "${disk}" "$(cat /sys/block/${disk}/queue/scheduler | grep -o '\[.*\]') $(cat /sys/block/${disk}/queue/nr_requests)"
fdisk -l "/dev/${disk}" >> /tmp/aspersa 2>/dev/null
fi
done
# Relies on /tmp/aspersa having data from the Disk Schedulers loop.
section "Disk_Partioning"
parse_fdisk
section "Kernel_Inode_State"
for file in dentry-state file-nr inode-nr; do
name_val "${file}" "$(cat /proc/sys/fs/${file} 2>&1)"
done
section "LVM_Volumes"
if which lvs >/dev/null 2>&1 && test -x "$(which lvs)"; then
lvs 2>&1
else
echo "Cannot execute 'lvs'";
fi
fi
section "RAID_Controller"
# ########################################################################
# We look in lspci first because it's more reliable, then dmesg, because it's
# often available to non-root users. It's most reliable to look at
# /var/log/dmesg if possible.
# ########################################################################
if which lspci >/dev/null 2>&1 && lspci > /tmp/aspersa 2>/dev/null; then
controller="$(parse_raid_controller_lspci)"
fi
if [ -z "${controller}" ]; then
cat /var/log/dmesg > /tmp/aspersa 2>/dev/null
if [ ! -s /tmp/aspersa ]; then
dmesg > /tmp/aspersa 2>/dev/null
fi
controller="$(parse_raid_controller_dmesg)"
fi
name_val Controller "${controller:-No RAID controller detected}"
# ########################################################################
# Attempt to get, parse, and print RAID controller status from possibly
# proprietary management software. Any executables that are normally stored
# in a weird location, such as /usr/StorMan/arcconf, should have their
# location added to $PATH at the beginning of main().
# ########################################################################
notfound=""
if [ "${controller}" = "AACRAID" ]; then
if arcconf getconfig 1 > /tmp/aspersa 2>/dev/null; then
parse_arcconf
elif ! which arcconf >/dev/null 2>&1; then
notfound="e.g. http://www.adaptec.com/en-US/support/raid/scsi_raid/ASR-2120S/"
fi
elif [ "${controller}" = "HP Smart Array" ]; then
if hpacucli ctrl all show config > /tmp/aspersa 2>/dev/null; then
parse_hpacucli
elif ! which hpacucli >/dev/null 2>&1; then
notfound="your package repository or the manufacturer's website"
fi
elif [ "${controller}" = "LSI Logic MegaRAID SAS" ]; then
if MegaCli64 -AdpAllInfo -aALL -NoLog > /tmp/aspersa 2>/dev/null; then
parse_lsi_megaraid_adapter_info
elif ! which MegaCli64 >/dev/null 2>&1; then
notfound="your package repository or the manufacturer's website"
fi
if MegaCli64 -AdpBbuCmd -GetBbuStatus -aALL -NoLog > /tmp/aspersa 2>/dev/null; then
parse_lsi_megaraid_bbu_status
fi
if MegaCli64 -LdPdInfo -aALL -NoLog > /tmp/aspersa 2>/dev/null; then
parse_lsi_megaraid_virtual_devices
parse_lsi_megaraid_devices
fi
fi
if [ "${notfound}" ]; then
echo " RAID controller software not found; try getting it from"
echo " ${notfound}"
fi
if echo "${ASPERSA_SKIP}" | grep -v NETWORK >/dev/null; then
# #####################################################################
# Network stuff
# #####################################################################
if [ "${platform}" = "Linux" ]; then
section Network_Config
if which lspci > /dev/null 2>&1 && lspci > /tmp/aspersa 2>/dev/null; then
parse_ethernet_controller_lspci
fi
if sysctl net.ipv4.tcp_fin_timeout > /dev/null 2>&1; then
name_val "FIN Timeout" "$(sysctl net.ipv4.tcp_fin_timeout)"
name_val "Port Range" "$(sysctl net.ipv4.ip_local_port_range)"
fi
fi
# TODO cat /proc/sys/net/ipv4/ip_conntrack_max ; it might be
# /proc/sys/net/netfilter/nf_conntrack_max or /proc/sys/net/nf_conntrack_max
# in new kernels like Fedora 12?
if which ip >/dev/null 2>&1 && ip -s link > /tmp/aspersa 2>/dev/null; then
section Interface_Statistics
parse_ip_s_link /tmp/aspersa
fi
if [ "${platform}" = "Linux" ]; then
section Network_Connections
if netstat -antp > /tmp/aspersa 2>/dev/null; then
parse_netstat
fi
fi
fi
# ########################################################################
# Processes, load, etc
# ########################################################################
if echo "${ASPERSA_SKIP}" | grep -v PROCESS >/dev/null; then
section Top_Processes
if which prstat > /dev/null 2>&1; then
prstat | head
elif which top > /dev/null 2>&1 ; then
cmd="top -bn 1"
if [ "${platform}" = "FreeBSD" ]; then
cmd="top -b -d 1"
fi
$cmd | sed -e 's# *$##g' -e '/./{H;$!d;}' -e 'x;/PID/!d;' | grep . | head
fi
if which vmstat > /dev/null 2>&1 ; then
section "Simplified_and_fuzzy_rounded_vmstat_(wait_please)"
vmstat 1 5 > /tmp/aspersa
if [ "${platform}" = "Linux" ]; then
format_vmstat
else
# TODO: simplify/format for other platforms
cat /tmp/aspersa
fi
fi
fi
# ########################################################################
# All done. Signal the end so it's explicit.
# ########################################################################
temp_files "rm"
temp_files "check"
section The_End
}
# Execute the program if it was not included from another file. This makes it
# possible to include without executing, and thus test.
if [ "$(basename "$0")" = "summary" ] || [ "$(basename "$0")" = "bash" -a "$_" = "$0" ]; then
main $@
fi
执行信息
# Aspersa System Summary Report ##############################
Date | 2011-06-12 08:56:30 UTC (local TZ: CST +0800)
Hostname | ubuntu1104-dev01
Uptime | 2 days, 6:37, 2 users, load average: 0.00, 0.01, 0.05
System | Dell Inc.; OptiPlex 990; v01 (Mini Tower)
Service Tag | XXXXXXX
Platform | Linux
Release | Ubuntu 11.04 (natty)
Kernel | 2.6.38-8-generic
Architecture | CPU = 64-bit, OS = 64-bit
Threading | NPTL 2.13
SELinux | No SELinux detected
Virtualized | No virtualization detected
# Processor ##################################################
Processors | physical = 1, cores = 4, virtual = 8, hyperthreading = yes
Speeds | 7x1600.000, 1x2600.000
Models | 8xIntel(R) Core(TM) i7-2600 CPU @ 3.40GHz
Caches | 8x8192 KB
# Memory #####################################################
Total | 15.66G
Free | 13.08G
Used | physical = 2.59G, swap = 0.00k, virtual = 2.59G
Buffers | 175.48M
Caches | 1.55G
Dirty | 40 kB
UsedRSS | 746.0M
Swappiness | vm.swappiness = 60
DirtyPolicy | vm.dirty_ratio = 10, vm.dirty_background_ratio = 5
DirtyStatus | vm.dirty_bytes = 0, vm.dirty_background_bytes = 0
Locator Size Speed Form Factor Type Type Detail
========= ======== ================= ============= ============= ===========
ChannelA-DIMM0 4096 MB 1333 MHz (0.8 ns) DIMM {OUT OF SPEC} Synchronous
ChannelA-DIMM1 4096 MB 1333 MHz (0.8 ns) DIMM {OUT OF SPEC} Synchronous
ChannelB-DIMM0 4096 MB 1333 MHz (0.8 ns) DIMM {OUT OF SPEC} Synchronous
ChannelB-DIMM1 4096 MB 1333 MHz (0.8 ns) DIMM {OUT OF SPEC} Synchronous
# Mounted Filesystems ########################################
Filesystem Size Used Type Opts Mountpoint
/dev/sda1 902G 2% ext4 rw,errors=remount-ro,commit=0 /
none 7.9G 0% devpts rw,noexec,nosuid,gid=5,mode=0620 /var/lock
none 7.9G 0% tmpfs rw,nosuid,nodev /var/lock
none 7.9G 0% devtmpfs rw,mode=0755 /var/lock
none 7.9G 0% debugfs rw /var/lock
none 7.9G 0% securityfs rw /var/lock
none 7.9G 0% sysfs rw,noexec,nosuid,nodev /var/lock
none 7.9G 0% tmpfs rw,noexec,nosuid,nodev /var/lock
none 7.9G 0% tmpfs rw,nosuid,mode=0755 /var/lock
none 7.9G 1% devpts rw,noexec,nosuid,gid=5,mode=0620 /dev/shm
none 7.9G 1% tmpfs rw,nosuid,nodev /dev/shm
none 7.9G 1% devtmpfs rw,mode=0755 /dev/shm
none 7.9G 1% debugfs rw /dev/shm
none 7.9G 1% securityfs rw /dev/shm
none 7.9G 1% sysfs rw,noexec,nosuid,nodev /dev/shm
none 7.9G 1% tmpfs rw,noexec,nosuid,nodev /dev/shm
none 7.9G 1% tmpfs rw,nosuid,mode=0755 /dev/shm
none 7.9G 1% devpts rw,noexec,nosuid,gid=5,mode=0620 /dev
none 7.9G 1% tmpfs rw,nosuid,nodev /dev
none 7.9G 1% devtmpfs rw,mode=0755 /dev
none 7.9G 1% debugfs rw /dev
none 7.9G 1% securityfs rw /dev
none 7.9G 1% sysfs rw,noexec,nosuid,nodev /dev
none 7.9G 1% tmpfs rw,noexec,nosuid,nodev /dev
none 7.9G 1% tmpfs rw,nosuid,mode=0755 /dev
none 7.9G 1% devpts rw,noexec,nosuid,gid=5,mode=0620 /var/run
none 7.9G 1% tmpfs rw,nosuid,nodev /var/run
none 7.9G 1% devtmpfs rw,mode=0755 /var/run
none 7.9G 1% debugfs rw /var/run
none 7.9G 1% securityfs rw /var/run
none 7.9G 1% sysfs rw,noexec,nosuid,nodev /var/run
none 7.9G 1% tmpfs rw,noexec,nosuid,nodev /var/run
none 7.9G 1% tmpfs rw,nosuid,mode=0755 /var/run
# Disk Schedulers And Queue Size #############################
sda | [cfq] 128
sr0 | [cfq] 128
# Disk Partioning ############################################
Device Type Start End Size
============ ==== ========== ========== ==================
/dev/sda Disk 1000204886016
/dev/sda1 Part 1 119519 983069015040
/dev/sda2 Part 119519 121602 17133258240
/dev/sda5 Part 119519 121602 17133258240
# Kernel Inode State #########################################
dentry-state | 153236 143621 45 0 0 0
file-nr | 5664 0 1601386
inode-nr | 76942 2365
# LVM Volumes ################################################
Cannot execute 'lvs'
# RAID Controller ############################################
Controller | Intel Corporation 82801 SATA RAID Controller (rev 04)
# Network Config #############################################
Controller | Intel Corporation 82579LM Gigabit Network Connection (rev 04)
FIN Timeout | net.ipv4.tcp_fin_timeout = 60
Port Range | net.ipv4.ip_local_port_range = 32768 61000
# Interface Statistics #######################################
interface rx_bytes rx_packets rx_errors tx_bytes tx_packets tx_errors
========= ========= ========== ========== ========== ========== ==========
l 2000000000 12500000 0 2000000000 12500000 0
eth 100000000 350000 0 12500000 80000 0
vboxnet 0 0 0 0 0 0
# Network Connections ########################################
Connections from remote IP addresses
127.0.0. 2
192.168.0.23 1
Connections to local IP addresses
127.0.0. 2
192.168.0.24 1
Connections to top 10 local ports
22 1
4369 1
45022 1
States of connections
ESTABLISHED 3
LISTEN 8
# Top Processes ##############################################
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
1 root 20 0 24008 2212 1356 S 0 0.0 0:01.78 init
2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd
3 root 20 0 0 0 0 S 0 0.0 0:01.98 ksoftirqd/0
5 root 20 0 0 0 0 S 0 0.0 0:00.25 kworker/u:0
6 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/0
7 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/1
8 root 20 0 0 0 0 S 0 0.0 0:03.52 kworker/1:0
9 root 20 0 0 0 0 S 0 0.0 0:00.77 ksoftirqd/1
11 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/2
# Simplified and fuzzy rounded vmstat (wait please) ##########
procs ---swap-- -----io---- ---system---- --------cpu--------
r b si so bi bo ir cs us sy il wa st
0 0 0 0 1 1 25 1 0 0 99 0
0 0 0 0 0 0 250 450 0 0 100 0
0 0 0 0 0 125 150 250 0 0 99 1
0 0 0 0 0 0 100 150 0 0 100 0
0 0 0 0 0 0 100 225 0 0 100 0
# The End ####################################################
扫一扫
3550
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
