oracle10g 裸设备建库

最新推荐文章于 2021-10-09 15:22:37 发布

谢锋

最新推荐文章于 2021-10-09 15:22:37 发布

阅读量1.2k

点赞数

文章标签： oracle10g oracle service processing command table

本文链接：https://blog.csdn.net/wonder_man/article/details/7229774

版权

rawdevice database：
安装iscsi服务端rpm包:
yum install scsi-target-utils
安装iscsi客户端rpm包:
yum install iscsi-initiator-utils

校验iscsi所需服务启动否:
service iscsi status
service iscsid status
service tgtd status

配置脚本:
vi /etc/tgt/targets.conf
----------------------------------------
<target iqn.2011-01.com.oracle.blues:luns1>
backing-store /dev/sda12
initiator-address 10.1.1.0/24
</target>
----------------------------------------

vi /etc/udev/scripts/iscsidev.sh
----------------------------------------
#!/bin/bash
BUS=${1}
HOST=${BUS%%:*}
[ -e /sys/class/iscsi_host ] || exit 1
file="/sys/class/iscsi_host/host${HOST}/device/session*/iscsi_session*/targetname"
target_name=$(cat ${file})
if [ -z "${target_name}" ] ; then
exit 1
fi
echo "${target_name##*:}"
----------------------------------------

chmod +x /etc/udev/scripts/iscsidev.sh

vi /etc/udev/rules.d/55-openiscsi.rules
-----------------------------------------------
KERNEL=="sd*",BUS=="scsi",PROGRAM="/etc/udev/scripts/iscsidev.sh %b",SYMLINK+="iscsi/%c"
-----------------------------------------------

在服务端发布设备:
service tgtd restart
tgtadm --lld iscsi --op bind --mode target --tid 1 -I ALL
service iscsi start

扫描iscsi服务器:
iscsiadm -m discovery -t sendtargets -p 10.1.1.xx -l
（关闭扫描错误的设备
iscsiadm -m session -u
iscsiadm -m discovery -t sendtargets -p 10.1.1.xx -l）

对iscsi共享盘分区：
dd if=/dev/zero of=/u01/spfile bs=1M count=10
dd if=/dev/zero of=/u01/ctl1 bs=1M count=10
dd if=/dev/zero of=/u01/ctl2 bs=1M count=10
dd if=/dev/zero of=/u01/ctl3 bs=1M count=10
dd if=/dev/zero of=/u01/redo1 bs=1M count=101
dd if=/dev/zero of=/u01/redo2 bs=1M count=101
dd if=/dev/zero of=/u01/redo3 bs=1M count=101
dd if=/dev/zero of=/u01/system bs=1M count=550
dd if=/dev/zero of=/u01/sysaux bs=1M count=300
dd if=/dev/zero of=/u01/undo bs=1M count=50
dd if=/dev/zero of=/u01/temp bs=1M count=50
dd if=/dev/zero of=/u01/users bs=1M count=50
dd if=/dev/zero of=/u01/example bs=1M count=150

将新建的分区加入rawdevice：
vi /etc/udev/rules.d/60-raw.rules
------------------------------------------------
ACTION=="add", KERNEL=="sdb1", RUN+="/bin/raw /dev/raw/raw1 %N"
ACTION=="add", KERNEL=="sdb2", RUN+="/bin/raw /dev/raw/raw2 %N"
ACTION=="add", KERNEL=="sdb3", RUN+="/bin/raw /dev/raw/raw3 %N"
ACTION=="add", KERNEL=="sdb5", RUN+="/bin/raw /dev/raw/raw5 %N"
ACTION=="add", KERNEL=="sdb6", RUN+="/bin/raw /dev/raw/raw6 %N"
ACTION=="add", KERNEL=="sdb7", RUN+="/bin/raw /dev/raw/raw7 %N"
ACTION=="add", KERNEL=="sdb8", RUN+="/bin/raw /dev/raw/raw8 %N"
ACTION=="add", KERNEL=="sdb9", RUN+="/bin/raw /dev/raw/raw9 %N"
ACTION=="add", KERNEL=="sdb10", RUN+="/bin/raw /dev/raw/raw10 %N"
ACTION=="add", KERNEL=="sdb11", RUN+="/bin/raw /dev/raw/raw11 %N"
ACTION=="add", KERNEL=="sdb12", RUN+="/bin/raw /dev/raw/raw12 %N"
ACTION=="add", KERNEL=="sdb13", RUN+="/bin/raw /dev/raw/raw13 %N"
ACTION=="add", KERNEL=="sdb14", RUN+="/bin/raw /dev/raw/raw14 %N"
KERNEL=="raw[1-3]", MODE="0660", GROUP="oinstall", OWNER="oracle"
KERNEL=="raw[5-9]", MODE="0660", GROUP="oinstall", OWNER="oracle"
KERNEL=="raw[10]", MODE="0660", GROUP="oinstall", OWNER="oracle"
KERNEL=="raw[11]", MODE="0660", GROUP="oinstall", OWNER="oracle"
KERNEL=="raw[12]", MODE="0660", GROUP="oinstall", OWNER="oracle"
KERNEL=="raw[13]", MODE="0660", GROUP="oinstall", OWNER="oracle"
KERNEL=="raw[14]", MODE="0660", GROUP="oinstall", OWNER="oracle"

启动udev:
start_udev

为dbca准备裸设备配置文件:
--vi /home/oracle/dbca_raw_config.txt--
spfile=/dev/raw/raw1
control1=/dev/raw/raw2
control2=/dev/raw/raw3
control3=/dev/raw/raw5
redo1_1=/dev/raw/raw6
redo1_2=/dev/raw/raw7
redo1_3=/dev/raw/raw8
system=/dev/raw/raw9
sysaux=/dev/raw/raw10
undotbs1=/dev/raw/raw11
temp=/dev/raw/raw12
users=/dev/raw/raw13
example=/dev/raw/raw14

具体操作：
[root@b95 ~]# rpm -qa | grep scsi-target-utils
[root@b95 ~]# rpm -qa | grep scsi
iscsi-initiator-utils-6.2.0.871-0.16.el5
[root@b95 ~]# fdisk -l

Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id System
/dev/sda1   *           1          64      514048+ 83 Linux
/dev/sda2              65        8988    71682030   83 Linux
/dev/sda3            8989       15362    51199155   83 Linux
/dev/sda4           15363       60801   364988767+   5 Extended
/dev/sda5           15363       20461    40957686   83 Linux
/dev/sda6           20462       25560    40957686   83 Linux
/dev/sda7           25561       30022    35840983+ 83 Linux
/dev/sda8           30023       34484    35840983+ 83 Linux
/dev/sda9           34485       38946    35840983+ 83 Linux
/dev/sda10          38947       42133    25599546   83 Linux
/dev/sda11          42134       42655     4192933+ 82 Linux swap / Solaris
/dev/sda12          42656       42668      104391   83 Linux
/dev/sda13          42669       42681      104391   83 Linux
[root@b95 ~]# mount
/dev/sda2 on / type ext3 (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
/dev/sda10 on /home type ext3 (rw)
/dev/sda9 on /var type ext3 (rw)
/dev/sda8 on /usr type ext3 (rw)
/dev/sda7 on /vmware type ext3 (rw)
/dev/sda6 on /tmp type ext3 (rw)
/dev/sda5 on /opt type ext3 (rw)
/dev/sda3 on /u1 type ext3 (rw)
/dev/sda1 on /boot type ext3 (rw)
tmpfs on /dev/shm type tmpfs (rw)
none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw)
none on /proc/fs/vmblock/mountPoint type vmblock (rw)
nfsd on /proc/fs/nfsd type nfsd (rw)
[root@b95 ~]# yum install scsi-target-utils
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Cluster                                                                      | 1.3 kB     00:00
ClusterStorage                                                               | 1.3 kB     00:00
Server                                                                       | 1.3 kB     00:00
VT                                                                           | 1.3 kB     00:00
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package scsi-target-utils.i386 0:0.0-6.20091205snap.el5_4.1 set to be updated
--> Processing Dependency: perl(Config::General) for package: scsi-target-utils
--> Processing Dependency: librdmacm.so.1 for package: scsi-target-utils
--> Processing Dependency: libibverbs.so.1 for package: scsi-target-utils
--> Running transaction check
---> Package libibverbs.i386 0:1.1.3-2.el5 set to be updated
--> Processing Dependency: openib >= 1.0 for package: libibverbs
--> Processing Dependency: libibverbs-driver for package: libibverbs
---> Package librdmacm.i386 0:1.0.10-1.el5 set to be updated
---> Package perl-Config-General.noarch 0:2.40-1.el5 set to be updated
--> Running transaction check
---> Package libnes.i386 0:0.9.0-2.el5 set to be updated
---> Package openib.noarch 0:1.4.1-5.el5 set to be updated
--> Finished Dependency Resolution

Dependencies Resolved

====================================================================================================
Package                   Arch         Version                          Repository            Size
====================================================================================================
Installing:
scsi-target-utils         i386         0.0-6.20091205snap.el5_4.1       ClusterStorage       142 k
Installing for dependencies:
libibverbs                i386         1.1.3-2.el5                      Server                45 k
libnes                    i386         0.9.0-2.el5                      Server                13 k
librdmacm                 i386         1.0.10-1.el5                     Server                23 k
openib                    noarch       1.4.1-5.el5                      Server                20 k
perl-Config-General       noarch       2.40-1.el5                       ClusterStorage        69 k

Transaction Summary
====================================================================================================
Install 6 Package(s)
Upgrade 0 Package(s)

Total download size: 311 k
Is this ok [y/N]: y
Downloading Packages:
----------------------------------------------------------------------------------------------------
Total                                                               6.2 MB/s | 311 kB     00:00
Running rpm_check_debug
Running Transaction Test
Finished Transaction Test
Transaction Test Succeeded
Running Transaction
Installing     : perl-Config-General                                                          1/6
Installing     : openib                                                                       2/6
Installing     : libibverbs                                                                   3/6
Installing     : librdmacm                                                                    4/6
Installing     : scsi-target-utils                                                            5/6
Installing     : libnes                                                                       6/6

Installed:
scsi-target-utils.i386 0:0.0-6.20091205snap.el5_4.1

Dependency Installed:
libibverbs.i386 0:1.1.3-2.el5                          libnes.i386 0:0.9.0-2.el5
librdmacm.i386 0:1.0.10-1.el5                          openib.noarch 0:1.4.1-5.el5
perl-Config-General.noarch 0:2.40-1.el5

Complete!
[root@b95 ~]# service iscsi status
iscsid is stopped
[root@b95 ~]# service iscsi start
iscsid is stopped
Starting iSCSI daemon:                                     [ OK ]
                                                           [ OK ]
Setting up iSCSI targets: iscsiadm: No records found!
                                                           [ OK ]
[root@b95 ~]# service iscsid status
iscsid (pid 3555) is running...
[root@b95 ~]# service tgtd status
tgtd is stopped
[root@b95 ~]# service tgtd start
Starting SCSI target daemon: Starting target framework daemon

[root@b95 ~]# service tgtd start
Starting SCSI target daemon:                               [ OK ]
[root@b95 ~]#
[root@b95 ~]#
[root@b95 ~]#
[root@b95 ~]# service tgtd status
tgtd (pid 3592 3591) is running...
[root@b95 ~]# chkconfig iscsi --list
iscsi           0:off   1:off   2:off   3:on    4:on    5:off   6:off
[root@b95 ~]# chkconfig iscsid --list
iscsid          0:off   1:off   2:off   3:on    4:on    5:off   6:off
[root@b95 ~]# chkconfig tgtd --list
tgtd            0:off   1:off   2:off   3:off   4:off   5:off   6:off
[root@b95 ~]#
[root@b95 ~]#
[root@b95 ~]#
[root@b95 ~]#
[root@b95 ~]#
[root@b95 ~]#
[root@b95 ~]# fdisk /dev/sda

The number of cylinders for this disk is set to 60801.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)

Command (m for help): p

Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Command (m for help): d
Partition number (1-13): 13

Command (m for help): d
Partition number (1-12): 12

Command (m for help): p

Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Command (m for help): n
First cylinder (42656-60801, default 42656):
Using default value 42656
Last cylinder or +size or +sizeM or +sizeK (42656-60801, default 60801): +20G

Command (m for help): p

Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Command (m for help): w
The partition table has been altered!

Calling ioctl() to re-read partition table.

WARNING: Re-reading the partition table failed with error 16: Device or resource busy.
The kernel still uses the old table.
The new table will be used at the next reboot.
Syncing disks.
[root@b95 ~]# partprobe /dev/sda
[root@b95 ~]# vi /etc/tgt/targets.conf
[root@b95 ~]# vi /etc/udev/scripts/iscsidev.sh
[root@b95 ~]# chmod +x /etc/udev/scripts/iscsidev.sh
[root@b95 ~]# vi /etc/udev/rules.d/55-openiscsi.rules
[root@b95 ~]# tgtadm --lld iscsi --op bind --mode target --tid 1 -I ALL
tgtadm: can't find the target
[root@b95 ~]# service iscsi start
iscsid (pid 3555) is running...
Setting up iSCSI targets: iscsiadm: No records found!
[ OK ]
[root@b95 ~]# tgtadm --lld iscsi --op bind --mode target --tid 1 -I ALL
tgtadm: can't find the target
[root@b95 ~]# service tgtd restart
Stopping SCSI target daemon: Stopping target framework daemon
[ OK ]
Starting SCSI target daemon: Starting target framework daemon

[root@b95 ~]# tgtadm --lld iscsi --op bind --mode target --tid 1 -I ALL
[root@b95 ~]# tgtadm --lld iscsi --op bind --mode target --tid 1 -I ALL
tgtadm: this access control rule already exists
[root@b95 ~]# iscsiadm -m discovery -t sendtargets -p 10.1.1.95 -l
10.1.1.95:3260,1 iqn.2011-01.com.oracle.blues:luns1
Logging in to [iface: default, target: iqn.2011-01.com.oracle.blues:luns1, portal: 10.1.1.95,3260]
Login to [iface: default, target: iqn.2011-01.com.oracle.blues:luns1, portal: 10.1.1.95,3260]: successful
[root@b95 ~]# fdisk -l

Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Disk /dev/sdb: 20.0 GB, 20012073984 bytes
64 heads, 32 sectors/track, 19085 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes

Disk /dev/sdb doesn't contain a valid partition table
[root@b95 ~]# fdisk /dev/sdb
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that, of course, the previous
content won't be recoverable.

The number of cylinders for this disk is set to 19085.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)

Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-19085, default 1):
Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-19085, default 19085): +10M

Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 2
First cylinder (12-19085, default 12):
Using default value 12
Last cylinder or +size or +sizeM or +sizeK (12-19085, default 19085): +20M

Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 3
First cylinder (32-19085, default 32):
Using default value 32
Last cylinder or +size or +sizeM or +sizeK (32-19085, default 19085): +20M

Command (m for help): n
Command action
e extended
p primary partition (1-4)
e
Selected partition 4
First cylinder (52-19085, default 52):
Using default value 52
Last cylinder or +size or +sizeM or +sizeK (52-19085, default 19085):
Using default value 19085

Command (m for help): n
First cylinder (52-19085, default 52):
Using default value 52
Last cylinder or +size or +sizeM or +sizeK (52-19085, default 19085): +20M

Command (m for help): n
First cylinder (72-19085, default 72):
Using default value 72
Last cylinder or +size or +sizeM or +sizeK (72-19085, default 19085): +51M

Command (m for help): n
First cylinder (122-19085, default 122):
Using default value 122
Last cylinder or +size or +sizeM or +sizeK (122-19085, default 19085): +51M

Command (m for help): n
First cylinder (172-19085, default 172):
Using default value 172
Last cylinder or +size or +sizeM or +sizeK (172-19085, default 19085): +51M

Command (m for help): n
First cylinder (222-19085, default 222):
Using default value 222
Last cylinder or +size or +sizeM or +sizeK (222-19085, default 19085): +600M

Command (m for help): n
First cylinder (795-19085, default 795):
Using default value 795
Last cylinder or +size or +sizeM or +sizeK (795-19085, default 19085): +400M

Command (m for help): n
First cylinder (1177-19085, default 1177):
Using default value 1177
Last cylinder or +size or +sizeM or +sizeK (1177-19085, default 19085): +100M

Command (m for help): n
First cylinder (1273-19085, default 1273):
Using default value 1273
Last cylinder or +size or +sizeM or +sizeK (1273-19085, default 19085): +100M

Command (m for help): n
First cylinder (1369-19085, default 1369):
Using default value 1369
Last cylinder or +size or +sizeM or +sizeK (1369-19085, default 19085): +100M

Command (m for help): n
First cylinder (1465-19085, default 1465):
Using default value 1465
Last cylinder or +size or +sizeM or +sizeK (1465-19085, default 19085): +200M

Command (m for help): p

Disk /dev/sdb: 20.0 GB, 20012073984 bytes
64 heads, 32 sectors/track, 19085 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes

   Device Boot      Start         End      Blocks   Id System
/dev/sdb1               1          11       11248   83 Linux
/dev/sdb2              12          31       20480   83 Linux
/dev/sdb3              32          51       20480   83 Linux
/dev/sdb4              52       19085    19490816    5 Extended
/dev/sdb5              52          71       20464   83 Linux
/dev/sdb6              72         121       51184   83 Linux
/dev/sdb7             122         171       51184   83 Linux
/dev/sdb8             172         221       51184   83 Linux
/dev/sdb9             222         794      586736   83 Linux
/dev/sdb10            795        1176      391152   83 Linux
/dev/sdb11           1177        1272       98288   83 Linux
/dev/sdb12           1273        1368       98288   83 Linux
/dev/sdb13           1369        1464       98288   83 Linux
/dev/sdb14           1465        1656      196592   83 Linux

Command (m for help): w
The partition table has been altered!

Calling ioctl() to re-read partition table.
Syncing disks.
[root@b95 ~]# partprobe /dev/sdb
[root@b95 ~]# vi /etc/udev/rules.d/60-raw.rules
[root@b95 ~]# start_udev
Starting udev:                                             [ OK ]
[root@b95 ~]# ll /dev/raw/
total 0
crw-rw---- 1 oracle oinstall 162, 1 Jul 14 22:41 raw1
crw------- 1 root   root     162, 10 Jul 14 22:41 raw10
crw------- 1 root   root     162, 11 Jul 14 22:41 raw11
crw------- 1 root   root     162, 12 Jul 14 22:41 raw12
crw------- 1 root   root     162, 13 Jul 14 22:41 raw13
crw------- 1 root   root     162, 14 Jul 14 22:41 raw14
crw-rw---- 1 oracle oinstall 162, 2 Jul 14 22:41 raw2
crw-rw---- 1 oracle oinstall 162, 3 Jul 14 22:41 raw3
crw-rw---- 1 oracle oinstall 162, 5 Jul 14 22:41 raw5
crw-rw---- 1 oracle oinstall 162, 6 Jul 14 22:41 raw6
crw-rw---- 1 oracle oinstall 162, 7 Jul 14 22:41 raw7
crw-rw---- 1 oracle oinstall 162, 8 Jul 14 22:41 raw8
crw-rw---- 1 oracle oinstall 162, 9 Jul 14 22:41 raw9
[root@b95 ~]# vi /etc/udev/rules.d/60-raw.rules
[root@b95 ~]# start_udev
Starting udev:                                             [ OK ]
[root@b95 ~]# ll /dev/raw/
total 0
crw-rw---- 1 oracle oinstall 162, 1 Jul 14 22:42 raw1
crw------- 1 root   root     162, 10 Jul 14 22:42 raw10
crw------- 1 root   root     162, 11 Jul 14 22:42 raw11
crw------- 1 root   root     162, 12 Jul 14 22:42 raw12
crw------- 1 root   root     162, 13 Jul 14 22:42 raw13
crw------- 1 root   root     162, 14 Jul 14 22:42 raw14
crw-rw---- 1 oracle oinstall 162, 2 Jul 14 22:42 raw2
crw-rw---- 1 oracle oinstall 162, 3 Jul 14 22:42 raw3
crw-rw---- 1 oracle oinstall 162, 5 Jul 14 22:42 raw5
crw-rw---- 1 oracle oinstall 162, 6 Jul 14 22:42 raw6
crw-rw---- 1 oracle oinstall 162, 7 Jul 14 22:42 raw7
crw-rw---- 1 oracle oinstall 162, 8 Jul 14 22:42 raw8
crw-rw---- 1 oracle oinstall 162, 9 Jul 14 22:42 raw9
[root@b95 ~]# chown oracle.oinstall /dev/raw/
[root@b95 ~]# ll /dev/raw
total 0
crw-rw---- 1 oracle oinstall 162, 1 Jul 14 22:42 raw1
crw------- 1 root   root     162, 10 Jul 14 22:42 raw10
crw------- 1 root   root     162, 11 Jul 14 22:42 raw11
crw------- 1 root   root     162, 12 Jul 14 22:42 raw12
crw------- 1 root   root     162, 13 Jul 14 22:42 raw13
crw------- 1 root   root     162, 14 Jul 14 22:42 raw14
crw-rw---- 1 oracle oinstall 162, 2 Jul 14 22:42 raw2
crw-rw---- 1 oracle oinstall 162, 3 Jul 14 22:42 raw3
crw-rw---- 1 oracle oinstall 162, 5 Jul 14 22:42 raw5
crw-rw---- 1 oracle oinstall 162, 6 Jul 14 22:42 raw6
crw-rw---- 1 oracle oinstall 162, 7 Jul 14 22:42 raw7
crw-rw---- 1 oracle oinstall 162, 8 Jul 14 22:42 raw8
crw-rw---- 1 oracle oinstall 162, 9 Jul 14 22:42 raw9
[root@b95 ~]# chown oracle.oinstall /dev/raw/*
[root@b95 ~]# ll /dev/raw
total 0
crw-rw---- 1 oracle oinstall 162, 1 Jul 14 22:42 raw1
crw------- 1 oracle oinstall 162, 10 Jul 14 22:42 raw10
crw------- 1 oracle oinstall 162, 11 Jul 14 22:42 raw11
crw------- 1 oracle oinstall 162, 12 Jul 14 22:42 raw12
crw------- 1 oracle oinstall 162, 13 Jul 14 22:42 raw13
crw------- 1 oracle oinstall 162, 14 Jul 14 22:42 raw14
crw-rw---- 1 oracle oinstall 162, 2 Jul 14 22:42 raw2
crw-rw---- 1 oracle oinstall 162, 3 Jul 14 22:42 raw3
crw-rw---- 1 oracle oinstall 162, 5 Jul 14 22:42 raw5
crw-rw---- 1 oracle oinstall 162, 6 Jul 14 22:42 raw6
crw-rw---- 1 oracle oinstall 162, 7 Jul 14 22:42 raw7
crw-rw---- 1 oracle oinstall 162, 8 Jul 14 22:42 raw8
crw-rw---- 1 oracle oinstall 162, 9 Jul 14 22:42 raw9
[root@b95 ~]# chmod 660 /dev/raw/*
[root@b95 ~]# ll /dev/raw
total 0
crw-rw---- 1 oracle oinstall 162, 1 Jul 14 22:42 raw1
crw-rw---- 1 oracle oinstall 162, 10 Jul 14 22:42 raw10
crw-rw---- 1 oracle oinstall 162, 11 Jul 14 22:42 raw11
crw-rw---- 1 oracle oinstall 162, 12 Jul 14 22:42 raw12
crw-rw---- 1 oracle oinstall 162, 13 Jul 14 22:42 raw13
crw-rw---- 1 oracle oinstall 162, 14 Jul 14 22:42 raw14
crw-rw---- 1 oracle oinstall 162, 2 Jul 14 22:42 raw2
crw-rw---- 1 oracle oinstall 162, 3 Jul 14 22:42 raw3
crw-rw---- 1 oracle oinstall 162, 5 Jul 14 22:42 raw5
crw-rw---- 1 oracle oinstall 162, 6 Jul 14 22:42 raw6
crw-rw---- 1 oracle oinstall 162, 7 Jul 14 22:42 raw7
crw-rw---- 1 oracle oinstall 162, 8 Jul 14 22:42 raw8
crw-rw---- 1 oracle oinstall 162, 9 Jul 14 22:42 raw9
[root@b95 ~]# su - roacle
su: user roacle does not exist
[root@b95 ~]# su - oracle
[oracle@b95 ~]$ vi /home/oracle/dbca_raw_config.txt
[oracle@b95 ~]$ dbca