官网中文离线视频

宽度规则高级设置 - 检查物理连接铜（Advanced Setting of the Width Rule - Check Physically Connected Copper）

http://altiumvideos.live.altium.com.cn/#Detail/1225/True

在这次的设计诀窍中我们将向您展示一些鲜为人知的Altium Designer中强大的宽度规则设置 - 检查物理连接铜的最小/最大宽度的功能。假设在板级中您已经完成了所有的布线，现在只剩下最后的设计规则检查了。我们运行DRC后，没有发现任何冲突。然而在我们所建议的手动检查后，总会在设计中发现一些比希望看到的东西。使用宽度规则的新选项，我们可以轻松发现这样的连接瑕疵，并把它标记为冲突。这样可以非常容易的发现并修正跟生产或应力相关的错误，这将大大提高印刷电路板的可靠性。

In this Design Secret we show you a little-known, yet very powerful Width rule setting from Altium Designer - the ability to check the min/max width for physically connected copper. Let’s assume you have done all the routing on your Board and now all that is left is a final Design Rule Check. Running the DRC flags no violations on the board. However after an additional manual check - which is always recommended - some rather awkward routing connections are discovered (see picture). With the use of this setting in the Width rule you can detect such connections and mark them as violations. This increases the reliability of your PCB, and reduces production-related or stress-related failures.