18系列AP在u-boot下不能直接启动tar文件,需要将tar文件解压得到part.bin文件然后才能启动。
在u-boot下使用bootipq tftp启动镜像。
(RNAQ-C7) # bootipq tftp
Specified BOOT: part2
Booting from tftp
Using eth1 device
TFTP from server 192.168.1.254; our IP address is 192.168.1.1
Filename 'part.bin'.
Load address: 0x45000000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
##################################
done
Bytes transferred = 19573381 (12aaa85 hex)
Signature returns 0
Image signing verification success, continue to run...
Using machid 0x1260 from environment
Starting image ...
[01/01/1970 00:00:00.0000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5387d
[01/01/1970 00:00:00.0000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[01/01/1970 00:00:00.0000] Machine: Cisco Systems 11ac Wave2 Wifi Access Point
[01/01/1970 00:00:00.0000] Memory policy: ECC disabled, Data cache writealloc
[01/01/1970 00:00:00.0000] Kernel command line: ubi.mtd=0 crashkernel=30M@1280M console=ttyHSL1,9600n8 activepart=tftp activeboot=0 wdgtriggered=0
[01/01/1970 00:00:00.1600] CPU1: Booted secondary processor
[01/01/1970 00:00:11.0467] ACPU PVS: 2
[01/01/1970 00:00:11.1667] msm_serial_hs: probe of msm_serial_hs.0 failed with error -2
[01/01/1970 00:00:11.8665] buginf tty flushing thread started, ttyport=ddff8e90
[01/01/1970 00:00:16.5050] msm_hsusb_host msm_hsusb_host: unable to find transceiver
[*01/01/1970 00:00:16.7149] buginf() enabled.
Welcome to Cisco.
Usage of this device is governed by Cisco's End User License Agreement,
available at:
http://www.cisco.com/c/en/us/td/docs/general/warranty/English/EU1KEN_.html.
Restricted Rights Legend
Use, duplication, or disclosure by the Government is subject to
restrictions as set forth in subparagraph (c) of the Commercial
Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and
subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
This product contains some software licensed under the
"GNU General Public License, version 2" provided with
ABSOLUTELY NO WARRANTY under the terms of
"GNU General Public License, version 2", available here:
http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
This product contains some software licensed under the
"GNU Library General Public License, version 2" provided
with ABSOLUTELY NO WARRANTY under the terms of "GNU Library
General Public License, version 2", available here:
http://www.gnu.org/licenses/old-licenses/lgpl-2.0.html
This product contains some software licensed under the
"GNU Lesser General Public License, version 2.1" provided
with ABSOLUTELY NO WARRANTY under the terms of "GNU Lesser
General Public License, version 2.1", available here:
http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html
This product contains some software licensed under the
"GNU General Public License, version 3" provided with
ABSOLUTELY NO WARRANTY under the terms of
"GNU General Public License, Version 3", available here:
http://www.gnu.org/licenses/gpl.html.
[*01/01/1970 00:00:16.7249] Made it into bootsh: Jun 7 2018 14:23:53
[*01/01/1970 00:00:16.7249] bootsh build T-8bfb55bdc885bb02b33a6d3b4b0055e5f22b33cc-g8bfb55bd-vipendya
init started: BusyBox v1.20.2 (2018-06-07 13:21:15 PDT)
User Access Verification
Username: [*01/01/1970 00:00:20.1439] Active version: 17.2.1.11
[*01/01/1970 00:00:20.1439] Backup version: 8.5.140.0
[*01/01/1970 00:00:20.4438] AP1810
[*01/01/1970 00:00:20.5238] nss_driver - Turbo Support 1
[*01/01/1970 00:00:20.5238] Supported Frequencies - 110Mhz 550Mhz 733Mhz
[*01/01/1970 00:00:26.6718] ssdk_plat_init start
[*01/01/1970 00:00:26.6718] Register QCA PHY driver
[*01/01/1970 00:00:26.6818] PHY ID is 0x4dd036
[*01/01/1970 00:00:26.8618] qca probe f1 phy driver succeeded!
[*01/01/1970 00:00:26.8618] qca-ssdk module init succeeded!
[*01/01/1970 00:00:26.8618] Chip version 0x1302
[*01/01/1970 00:00:27.4716]
[*01/01/1970 00:00:27.4716] Swtich config done.
[*01/01/1970 00:00:29.4110] Current value of FACTORY_RESET=0
[*08/07/2016 23:59:59.0000] Last reload time: May 6 08:18:02 2020
[*05/06/2020 08:18:02.0000] Setting system time Wed May 6 08:18:02 UTC 2020
[*05/06/2020 08:18:02.0699]
[*05/06/2020 08:18:02.0699]
[*05/06/2020 08:18:02.0699] === 5G radio domain is 51, COPY 5G BDF files from non_ETSI_BDF folder ===
[*05/06/2020 08:18:02.0699]
[*05/06/2020 08:18:02.0699]