gprs ppp拨号

最新推荐文章于 2021-05-04 23:23:49 发布
最新推荐文章于 2021-05-04 23:23:49 发布
阅读量2.2k 收藏
点赞数
分类专栏： 3G 文章标签： gprs
gprs ppp拨号  2009-10-22 16:11:02

分类： LINUX

软件版本支持
pppd version 2.4.3
硬件支持
gprs 模块 wavecom Q2403A
 
拨号脚本
#cat /etc/ppp/peers/gprs
# write by lee
# Usage:   root>pppd call gprs
/dev/ttyS3
115200
nocrtscts
modem
#noauth
debug
nodetach
#hide-password
usepeerdns
noipdefault
defaultroute
user "cmnet"
0.0.0.0:0.0.0.0
ipcp-accept-local
ipcp-accept-remote
#lcp-echo-failure  12
#lcp-echo-interval 3
noccp
#novj
#novjccomp
persist
connect '/usr/sbin/chat -s -v -f /etc/ppp/gprs-connect-chat'
#connect '/bin/chat -v -s -f /etc/ppp/gprs-connect-chat'
#disconnect '/bin/chat -v -f /etc/ppp/gprs-disconnect-chat'
 
#cat /etc/ppp/gprs-connect-chat
# chat script for China Mobile, used wavecom module by lee.
TIMEOUT         15
ABORT           '\nDELAYED\r'
ABORT           '\nBUSY\r'
ABORT           '\nERROR\r'
ABORT           '\nNO DIALTONE\r'
ABORT           '\nNO CARRIER\r'
''              \rAT
OK              ATS0=0
OK              ATE0V1
OK              AT+CGDCONT=1,"IP","CMNET"
OK              ATDT*99***1#
CONNECT         ''
 
#cat /etc/ppp/chap-secrets
#client    server secret IP address 
"cmnet"    *     "cmnet"    *
 
#cat /etc/ppp/pap-secrets
 
# Secrets for authentication using PAP
# client server secret   IP addresses
####### redhat-config-network will overwrite this part!!! (begin) ##########
####### redhat-config-network will overwrite this part!!! (end) ############
sss   * 123456
 
拨号出现如下错误
#pppd call gprs
timeout set to 15 seconds
abort on (\nDELAYED\r)
abort on (\nBUSY\r)
abort on (\nERROR\r)
abort on (\nNO DIALTONE\r)
abort on (\nNO CARRIER\r)
send (^MAT^M)
expect (OK)
^M
OK
 -- got it
send (ATS0=0^M)
expect (OK)
^M
^M
OK
 -- got it
send (ATE0V1^M)
expect (OK)
^M
^M
OK
 -- got it
send (AT+CGDCONT=1,"IP","CMNET"^M)
expect (OK)
^M
^M
OK
 -- got it
send (ATDT*99***1#^M)
expect (CONNECT)
^M
^M
CONNECT
 -- got it
send (^M)
Serial connection established.
using channel 13
Using interface ppp0
Connect: ppp0 <--> /dev/ttyS3
Warning - secret file /etc/ppp/pap-secrets has world and/or group access
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xcd3a033f> <pcomp> <accomp>]
rcvd [LCP ConfRej id=0x1 <magic 0xcd3a033f>]
sent [LCP ConfReq id=0x2 <asyncmap 0x0> <pcomp> <accomp>]
rcvd [LCP ConfAck id=0x2 <asyncmap 0x0> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x1 <mru 1500> <asyncmap 0x0> <pcomp> <accomp> <auth pap>]
sent [LCP ConfNak id=0x1 <auth eap>]
rcvd [LCP ConfReq id=0x2 <mru 1500> <asyncmap 0x0> <pcomp> <accomp> <auth pap>]
sent [LCP ConfNak id=0x2 <auth eap>]
rcvd [LCP ConfReq id=0x3 <mru 1500> <asyncmap 0x0> <pcomp> <accomp> <auth pap>]
sent [LCP ConfNak id=0x3 <auth eap>]
rcvd [LCP ConfReq id=0x4 <mru 1500> <asyncmap 0x0> <pcomp> <accomp> <auth pap>]
sent [LCP ConfNak id=0x4 <auth eap>]
rcvd [LCP ConfReq id=0x5 <mru 1500> <asyncmap 0x0> <pcomp> <accomp> <auth pap>]
sent [LCP ConfNak id=0x5 <auth eap>]
rcvd [LCP ConfReq id=0x6 <mru 1500> <asyncmap 0x0> <pcomp> <accomp> <auth pap>]
sent [LCP ConfRej id=0x6 <auth pap>]
rcvd [LCP ConfReq id=0x7 <mru 1500> <asyncmap 0x0> <pcomp> <accomp>]
sent [LCP ConfAck id=0x7 <mru 1500> <asyncmap 0x0> <pcomp> <accomp>]
sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <
ms-dns3 0.0.0.0>]
rcvd [LCP TermReq id=0x8]
LCP terminated by peer
sent [LCP TermAck id=0x8]
Connection terminated.
timeout set to 15 seconds
abort on (\nDELAYED\r)
abort on (\nBUSY\r)
abort on (\nERROR\r)
abort on (\nNO DIALTONE\r)
abort on (\nNO CARRIER\r)
send (^MAT^M)
expect (OK)
^M
OK
 -- got it
send (ATS0=0^M)
expect (OK)
^M
^M
OK
 -- got it
send (ATE0V1^M)
expect (OK)
^M
^M
OK
 -- got it
send (AT+CGDCONT=1,"IP","CMNET"^M)
expect (OK)
^M
^M
OK
 -- got it
send (ATDT*99***1#^M)
expect (CONNECT)
^M
^M
CONNECT
 -- got it
send (^M)
Serial connection established.
using channel 14
Using interface ppp0
Connect: ppp0 <--> /dev/ttyS3
Warning - secret file /etc/ppp/pap-secrets has world and/or group access
sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0x68a817fb> <pcomp> <accomp>]
sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0x68a817fb> <pcomp> <accomp>]
sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0x68a817fb> <pcomp> <accomp>]
sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0x68a817fb> <pcomp> <accomp>]
sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0x68a817fb> <pcomp> <accomp>]
sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0x68a817fb> <pcomp> <accomp>]
sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0x68a817fb> <pcomp> <accomp>]
sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0x68a817fb> <pcomp> <accomp>]
sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0x68a817fb> <pcomp> <accomp>]
sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0x68a817fb> <pcomp> <accomp>]
rcvd [LCP ConfRej id=0x3 <magic 0x68a817fb>]
sent [LCP ConfReq id=0x4 <asyncmap 0x0> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x1 <mru 1500> <asyncmap 0x0> <pcomp> <accomp> <auth pap>]
sent [LCP ConfNak id=0x1 <auth eap>]
rcvd [LCP ConfRej id=0x3 <magic 0x68a817fb>]
rcvd [LCP ConfReq id=0x1 <mru 1500> <asyncmap 0x0> <pcomp> <accomp> <auth pap>]
sent [LCP ConfNak id=0x1 <auth eap>]
rcvd [LCP ConfRej id=0x3 <magic 0x68a817fb>]
rcvd [LCP ConfReq id=0x1 <mru 1500> <asyncmap 0x0> <pcomp> <accomp> <auth pap>]
sent [LCP ConfNak id=0x1 <auth eap>]
rcvd [LCP ConfRej id=0x3 <magic 0x68a817fb>]
rcvd [LCP ConfReq id=0x1 <mru 1500> <asyncmap 0x0> <pcomp> <accomp> <auth pap>]
sent [LCP ConfNak id=0x1 <auth eap>]
rcvd [LCP ConfRej id=0x3 <magic 0x68a817fb>]
rcvd [LCP ConfReq id=0x1 <mru 1500> <asyncmap 0x0> <pcomp> <accomp> <auth pap>]
sent [LCP ConfNak id=0x1 <auth eap>]
rcvd [LCP ConfRej id=0x3 <magic 0x68a817fb>]
rcvd [LCP ConfReq id=0x1 <mru 1500> <asyncmap 0x0> <pcomp> <accomp> <auth pap>]
sent [LCP ConfRej id=0x1 <auth pap>]
rcvd [LCP ConfRej id=0x3 <magic 0x68a817fb>]
rcvd [LCP ConfReq id=0x1 <mru 1500> <asyncmap 0x0> <pcomp> <accomp> <auth pap>]
sent [LCP ConfRej id=0x1 <auth pap>]
rcvd [LCP ConfRej id=0x3 <magic 0x68a817fb>]
rcvd [LCP ConfReq id=0x1 <mru 1500> <asyncmap 0x0> <pcomp> <accomp> <auth pap>]
sent [LCP ConfRej id=0x1 <auth pap>]
rcvd [LCP ConfRej id=0x3 <magic 0x68a817fb>]
rcvd [LCP ConfReq id=0x1 <mru 1500> <asyncmap 0x0> <pcomp> <accomp> <auth pap>]
sent [LCP ConfRej id=0x1 <auth pap>]
rcvd [LCP ConfRej id=0x3 <magic 0x68a817fb>]
rcvd [LCP ConfAck id=0x4 <asyncmap 0x0> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x2 <mru 1500> <asyncmap 0x0> <pcomp> <accomp> <auth pap>]
sent [LCP ConfRej id=0x2 <auth pap>]
rcvd [LCP ConfReq id=0x3 <mru 1500> <asyncmap 0x0> <pcomp> <accomp>]
sent [LCP ConfAck id=0x3 <mru 1500> <asyncmap 0x0> <pcomp> <accomp>]
sent [IPCP ConfReq id=0x2 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <
ms-dns3 0.0.0.0>]
rcvd [LCP TermReq id=0x4]
LCP terminated by peer
sent [LCP TermAck id=0x4]
Connection terminated.
tcflush failed: Bad file descriptor
tcsetattr: Invalid argument (line 962)
tcsetattr: Invalid argument (line 1001)
 
检查发现是用户名密码不正确
 
修改pap-cerects
#cat /etc/ppp/pap-cerects
# Secrets for authentication using PAP
# client server secret   IP addresses
####### redhat-config-network will overwrite this part!!! (begin) ##########
####### redhat-config-network will overwrite this part!!! (end) ############
cmnet   * cmnet
 
正确拨号过程为
#pppd call gprs
timeout set to 15 seconds
abort on (\nDELAYED\r)
abort on (\nBUSY\r)
abort on (\nERROR\r)
abort on (\nNO DIALTONE\r)
abort on (\nNO CARRIER\r)
send (^MAT^M)
expect (OK)
^MAT^M^M
OK
 -- got it
send (ATS0=0^M)
expect (OK)
^M
ATS0=0^M^M
OK
 -- got it
send (ATE0V1^M)
expect (OK)
^M
ATE0V1^M^M
OK
 -- got it
send (AT+CGDCONT=1,"IP","CMNET"^M)
expect (OK)
^M
^M
OK
 -- got it
send (ATDT*99***1#^M)
expect (CONNECT)
^M
^M
CONNECT
 -- got it
send (^M)
Serial connection established.
using channel 1
Using interface ppp0
Connect: ppp0 <--> /dev/ttyS3
Warning - secret file /etc/ppp/pap-secrets has world and/or group access
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x21f29666> <pcomp> <accomp>]
rcvd [LCP ConfRej id=0x1 <magic 0x21f29666>]
sent [LCP ConfReq id=0x2 <asyncmap 0x0> <pcomp> <accomp>]
rcvd [LCP ConfAck id=0x2 <asyncmap 0x0> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x1 <mru 1500> <asyncmap 0x0> <pcomp> <accomp> <auth pap>]
sent [LCP ConfAck id=0x1 <mru 1500> <asyncmap 0x0> <pcomp> <accomp> <auth pap>]
Warning - secret file /etc/ppp/pap-secrets has world and/or group access
sent [PAP AuthReq id=0x1 user="cmnet" password=<hidden>]
sent [PAP AuthReq id=0x2 user="cmnet" password=<hidden>]
sent [PAP AuthReq id=0x3 user="cmnet" password=<hidden>]
sent [PAP AuthReq id=0x4 user="cmnet" password=<hidden>]
sent [PAP AuthReq id=0x5 user="cmnet" password=<hidden>]
sent [PAP AuthReq id=0x6 user="cmnet" password=<hidden>]
sent [PAP AuthReq id=0x7 user="cmnet" password=<hidden>]
sent [PAP AuthReq id=0x8 user="cmnet" password=<hidden>]
sent [PAP AuthReq id=0x9 user="cmnet" password=<hidden>]
rcvd [PAP AuthAck id=0x1 "Welcome!"]
Remote message: Welcome!
PAP authentication succeeded
sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <
ms-dns3 0.0.0.0>]
rcvd [IPCP ConfReq id=0x1 <addr 192.168.111.111>]
sent [IPCP ConfAck id=0x1 <addr 192.168.111.111>]
rcvd [IPCP ConfRej id=0x1 <compress VJ 0f 01>]
sent [IPCP ConfReq id=0x2 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [IPCP ConfRej id=0x2 <ms-dns1 0.0.0.0>]
sent [IPCP ConfReq id=0x3 <addr 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [IPCP ConfRej id=0x3 <ms-dns3 0.0.0.0>]
sent [IPCP ConfReq id=0x4 <addr 0.0.0.0>]
rcvd [IPCP ConfNak id=0x4 <addr 192.168.111.112>]
sent [IPCP ConfReq id=0x5 <addr 192.168.111.112>]
rcvd [IPCP ConfAck id=0x5 <addr 192.168.111.112>]
local  IP address 192.168.111.112
remote IP address 192.168.111.111
rcvd [LCP TermReq id=0x2]
LCP terminated by peer
Connect time 0.0 minutes.
Sent 0 bytes, received 0 bytes.
sent [LCP TermAck id=0x2]
Connection terminated.
timeout set to 15 seconds
abort on (\nDELAYED\r)
abort on (\nBUSY\r)
abort on (\nERROR\r)
abort on (\nNO DIALTONE\r)
abort on (\nNO CARRIER\r)
send (^MAT^M)
expect (OK)
^M
OK
 -- got it
send (ATS0=0^M)
expect (OK)
^M
^M
OK
 -- got it
send (ATE0V1^M)
expect (OK)
^M
^M
OK
 -- got it
send (AT+CGDCONT=1,"IP","CMNET"^M)
expect (OK)
^M
^M
OK
 -- got it
send (ATDT*99***1#^M)
expect (CONNECT)
^M
^M
CONNECT
 -- got it
send (^M)
Serial connection established.
using channel 2
Using interface ppp0
Connect: ppp0 <--> /dev/ttyS3
Warning - secret file /etc/ppp/pap-secrets has world and/or group access
sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0xc967c996> <pcomp> <accomp>]
sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0xc967c996> <pcomp> <accomp>]
sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0xc967c996> <pcomp> <accomp>]
sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0xc967c996> <pcomp> <accomp>]
sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0xc967c996> <pcomp> <accomp>]
sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0xc967c996> <pcomp> <accomp>]
sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0xc967c996> <pcomp> <accomp>]
sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0xc967c996> <pcomp> <accomp>]
sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0xc967c996> <pcomp> <accomp>]
sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0xc967c996> <pcomp> <accomp>]
rcvd [LCP ConfRej id=0x3 <magic 0xc967c996>]
sent [LCP ConfReq id=0x4 <asyncmap 0x0> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x1 <mru 1500> <asyncmap 0x0> <pcomp> <accomp> <auth pap>]
sent [LCP ConfAck id=0x1 <mru 1500> <asyncmap 0x0> <pcomp> <accomp> <auth pap>]
rcvd [LCP ConfRej id=0x3 <magic 0xc967c996>]
rcvd [LCP ConfReq id=0x1 <mru 1500> <asyncmap 0x0> <pcomp> <accomp> <auth pap>]
sent [LCP ConfAck id=0x1 <mru 1500> <asyncmap 0x0> <pcomp> <accomp> <auth pap>]
rcvd [LCP ConfRej id=0x3 <magic 0xc967c996>]
rcvd [LCP ConfReq id=0x1 <mru 1500> <asyncmap 0x0> <pcomp> <accomp> <auth pap>]
sent [LCP ConfAck id=0x1 <mru 1500> <asyncmap 0x0> <pcomp> <accomp> <auth pap>]
rcvd [LCP ConfRej id=0x3 <magic 0xc967c996>]
rcvd [LCP ConfReq id=0x1 <mru 1500> <asyncmap 0x0> <pcomp> <accomp> <auth pap>]
sent [LCP ConfAck id=0x1 <mru 1500> <asyncmap 0x0> <pcomp> <accomp> <auth pap>]
rcvd [LCP ConfRej id=0x3 <magic 0xc967c996>]
rcvd [LCP ConfReq id=0x1 <mru 1500> <asyncmap 0x0> <pcomp> <accomp> <auth pap>]
sent [LCP ConfAck id=0x1 <mru 1500> <asyncmap 0x0> <pcomp> <accomp> <auth pap>]
rcvd [LCP ConfRej id=0x3 <magic 0xc967c996>]
rcvd [LCP ConfReq id=0x1 <mru 1500> <asyncmap 0x0> <pcomp> <accomp> <auth pap>]
sent [LCP ConfAck id=0x1 <mru 1500> <asyncmap 0x0> <pcomp> <accomp> <auth pap>]
rcvd [LCP ConfRej id=0x3 <magic 0xc967c996>]
rcvd [LCP ConfReq id=0x1 <mru 1500> <asyncmap 0x0> <pcomp> <accomp> <auth pap>]
sent [LCP ConfAck id=0x1 <mru 1500> <asyncmap 0x0> <pcomp> <accomp> <auth pap>]
rcvd [LCP ConfRej id=0x3 <magic 0xc967c996>]
rcvd [LCP ConfReq id=0x1 <mru 1500> <asyncmap 0x0> <pcomp> <accomp> <auth pap>]
sent [LCP ConfAck id=0x1 <mru 1500> <asyncmap 0x0> <pcomp> <accomp> <auth pap>]
rcvd [LCP ConfRej id=0x3 <magic 0xc967c996>]
rcvd [LCP ConfReq id=0x1 <mru 1500> <asyncmap 0x0> <pcomp> <accomp> <auth pap>]
sent [LCP ConfAck id=0x1 <mru 1500> <asyncmap 0x0> <pcomp> <accomp> <auth pap>]
rcvd [LCP ConfRej id=0x3 <magic 0xc967c996>]
rcvd [LCP ConfAck id=0x4 <asyncmap 0x0> <pcomp> <accomp>]
Warning - secret file /etc/ppp/pap-secrets has world and/or group access
sent [PAP AuthReq id=0xa user="cmnet" password=<hidden>]
rcvd [PAP AuthAck id=0xa "Welcome!"]
Remote message: Welcome!
PAP authentication succeeded
sent [IPCP ConfReq id=0x6 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <
ms-dns3 0.0.0.0>]
rcvd [IPCP ConfReq id=0x1 <addr 192.168.111.111>]
sent [IPCP ConfAck id=0x1 <addr 192.168.111.111>]
rcvd [IPCP ConfRej id=0x6 <compress VJ 0f 01>]
sent [IPCP ConfReq id=0x7 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [IPCP ConfNak id=0x7 <addr 10.14.218.243> <ms-dns1 211.136.17.107> <ms-dns3
 211.136.20.203>]
sent [IPCP ConfReq id=0x8 <addr 10.14.218.243> <ms-dns1 211.136.17.107> <ms-dns3
 211.136.20.203>]
rcvd [IPCP ConfAck id=0x8 <addr 10.14.218.243> <ms-dns1 211.136.17.107> <ms-dns3
 211.136.20.203>]
local  IP address 10.14.218.243
remote IP address 192.168.111.111
primary   DNS address 211.136.17.107
secondary DNS address 211.136.20.203
 
快速的拨上过程为
#pppd call gprs &
[root@(none) /]$timeout set to 15 seconds
abort on (\nDELAYED\r)
abort on (\nBUSY\r)
abort on (\nERROR\r)
abort on (\nNO DIALTONE\r)
abort on (\nNO CARRIER\r)
send (^MAT^M)
expect (OK)
^M
OK
 -- got it
send (ATS0=0^M)
expect (OK)
^M
^M
OK
 -- got it
send (ATE0V1^M)
expect (OK)
^M
^M
OK
 -- got it
send (AT+CGDCONT=1,"IP","CMNET"^M)
expect (OK)
^M
^M
OK
 -- got it
send (ATDT*99***1#^M)
expect (CONNECT)
^M
^M
CONNECT
 -- got it
send (^M)
Serial connection established.
using channel 3
Using interface ppp0
Connect: ppp0 <--> /dev/ttyS3
rcvd [LCP ConfReq id=0x1 <mru 1500> <asyncmap 0x0> <pcomp> <accomp> <auth pap>]
Warning - secret file /etc/ppp/pap-secrets has world and/or group access
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa768de43> <pcomp> <accomp>]
sent [LCP ConfAck id=0x1 <mru 1500> <asyncmap 0x0> <pcomp> <accomp> <auth pap>]
rcvd [LCP ConfRej id=0x1 <magic 0xa768de43>]
sent [LCP ConfReq id=0x2 <asyncmap 0x0> <pcomp> <accomp>]
rcvd [LCP ConfAck id=0x2 <asyncmap 0x0> <pcomp> <accomp>]
Warning - secret file /etc/ppp/pap-secrets has world and/or group access
sent [PAP AuthReq id=0x1 user="cmnet" password=<hidden>]
rcvd [PAP AuthAck id=0x1 "Welcome!"]
Remote message: Welcome!
PAP authentication succeeded
sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <
ms-dns3 0.0.0.0>]
rcvd [IPCP ConfReq id=0x1 <addr 192.168.111.111>]
sent [IPCP ConfAck id=0x1 <addr 192.168.111.111>]
rcvd [IPCP ConfRej id=0x1 <compress VJ 0f 01>]
sent [IPCP ConfReq id=0x2 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [IPCP ConfNak id=0x2 <addr 10.14.221.254> <ms-dns1 211.136.17.107> <ms-dns3
 211.136.20.203>]
sent [IPCP ConfReq id=0x3 <addr 10.14.221.254> <ms-dns1 211.136.17.107> <ms-dns3
 211.136.20.203>]
rcvd [IPCP ConfAck id=0x3 <addr 10.14.221.254> <ms-dns1 211.136.17.107> <ms-dns3
 211.136.20.203>]
local  IP address 10.14.221.254
remote IP address 192.168.111.111
primary   DNS address 211.136.17.107
secondary DNS address 211.136.20.203
 
wujiangguizhen
关注
专栏目录
linux ppp拨号 USB,Linux中实现ppp拨号连接
weixin_29702195的博客
05-13 663
以SIM7600 3G/4G模块、联通sim卡为例实现ppp拨号连接，具体过程如下：1)安装pppd拨号软件，下载源码ppp-2.4.5.tar.gz，编译并安装(如是嵌入式环境，需交叉编译)，编译及安装命令如下：./configuremakemake install2)编辑和配置脚本/etc/ppp/peers/gprs-dial和/etc/chatscripts/gprs-chat；/etc/...
GPRS拨号上网配置详细过程
11-23
这是wince下，GPRS拨号上网配置的详细过程，及遇到问题的解决方法
GPRS实现pppd拨号
none
03-19 2571
1.1 pppd拨号程序 1.1.1 系统说明 系统采用pppd拨号之后，建立ppp0设备，与eth0相当，对系统来说就是提供了另外一个网路接口。 系统中存在两个网路接口，而上层的网路通信接口几乎都不指定使用哪个接口进行通信，这样就必须将ppp0设置为系统的默认网关。结果就是：系统根据目标地址将不是本地（即指不在eth0子网范围内）的数据包发送到ppp0上。 1.1.2 拨号控制分层 P
gprs拨号详解
04-21 2558
兄弟们通过在modem的高级--额外的初始化命命中加入AT+CGDCONT=1,"IP","cmwap"来上wap网。AT+CGDCONT=1,"IP","cmwap"  命令相信很多人都在使用at+ ：modem命令的标头，有它才执行。如 执行 at 返回一个 ok 表示modem接通正常。CGDCONT=1  ：定义PDP（分组数据协议类型）上下文，用于规定分组数据协议类型的字符串参数 当你拨*99***1#　就表示用CGDCONT=1  定义的分组数据协议类型来上网。在后面加上IP 表示使用因特网协议
GPRS 拨号上网
Linuxer
07-30 1100
     这几天做了一下gprs拨号上网，模块是西门子的mc39i。我的系统是fedora core 6。其实很简单，我又有高手指导，:-)。     首先从/usr/share/doc/ppp-2.4.4/scripts中cp ppp-on,ppp-off,ppp-on-dialer三个脚本到/home/a/ppp。然后做如下修改:在ppp-on里1.改电话号码为*99***1#2.将账号与密码
GPRS--手动拨号编程
PipiAvenger的博客
07-16 496
前言：     喔，终于熬过了期末考和实习，终于有属于自己的时间了，为了巩固之前的知识，就特此编写一个程序来实现这个功能；ps：程序本就是用来替代人手动的过程嘛。     前面我们实现了手动拨号上网，因此熟悉了拨号上网的流程，因此我们可以用程序来实现这个流程。拨号流程：1.工具准备2.软件准备3.连接准备4.手动拨号连接5.检查连接是否成功6.断开连接具体细节可参考我的pppd拨号连接博客：h...
ppp.rar_ ppp modem_PPP拨号软件_gprs ppp_ppp_ppp拨号
09-14
本文将深入探讨PPP拨号软件及其在GPRS连接中的应用。 PPP最初设计为电话线上的点对点通信协议，但随着时间的发展，它也被广泛应用在无线网络连接中，特别是GPRS（General Packet Radio Service）网络。GPRS是一种...
ppp.rar_PPP GPRS_dial gprs delphi_lwip ppp gprs_ppp拨号
09-19
标题中的"ppp.rar_PPP GPRS_dial gprs delphi_lwip ppp gprs_ppp拨号"提到了几个关键概念：PPP（Point-to-Point Protocol）、GPRS（General Packet Radio Service）、dial gprs（GPRS拨号）、Delphi编程语言以及lwip...
gprs_driver_test.rar_gprs ppp_ppp
09-23
GPRS是2G移动通信系统中的一种数据传输技术，而PPP则是一种在点对点连接上封装网络层协议的标准方法，常用于通过拨号连接进行互联网接入。 描述中的“gprs ppp连接实验环境2410”表明这是一个针对特定硬件平台——...
PPP实现GPRS的上网认证过程.doc
05-22
PPP实现GPRS的上网认证过程.doc
gprs拨号总结之二
heiniaoyuyouling的专栏
06-27 2158
<br />前一篇的GPRS拨号仅仅是解决了拨号这种功能性问题，要想让你的程序能够让别人来使用者是远远不够的。<br />接下来我就讲讲我们这个项目对GPRS功能完善的一些方法，如有错误请指教：<br />（1）GPRS网络首先要解决的是你的开发板是由有SIM卡，这是因为有可能你的SIM卡底座虚焊造成了SIM卡异常，无法拨号成功，如果你没有这么异步直接跳到拨号脚本进行拨号就会出现AT命令直接挂掉的情况，对于SIM卡的检测你的模块应该有标准的AT命令来指导你该如何做，可以加入一些其他的检测如信号质量、网络服务
linux GPRS模块拨号上网
guan的博客
01-23 1950
使用GPRS模块拨号上网之前需要一直pppd和chat 首先配置内核中的ppp选项， Make menuconfig Device dirver --->Network device    │ │                               *** CAIF transport drivers ***
windows通过GPRS模块拨号上网流程
Jogholy的专栏
09-07 4829
一） AT   指令设置部分     （1） AT+CGCLASS=”B”   置为“B”模式     （2） AT+CGDCONT=1,”IP”,”CMNET”     设置APN     （3） AT+CSQ       检查信号   若返回10—31，0之间的信号数字则继续，如果信号是99，99，则应该考虑不停的键入A/命令，不停的让模块去搜寻网络。     （4） AT+CGACT=1,1
2G、3G无线路由器拨号连接过程
u010783226的专栏
10-13 955
无线MODEM是为数据通信的数字信号在具有有限带宽的模拟信道上进行无线传输而设计的，它一般由基带处理、调制解调、信号放大和滤波、均衡等几部分组成。无线MODEM又名“无线调制解调器”，区别于传统modem之处在于调制后的信号是通过无线传输的。无线modem有2G和3G各种网络的,如GPRS、CDMA、EDGE、WCDMA、CDMA2000(EVDO)、TD-SCDMA等。 无线MODEM一般常见的接口有RS232串行口、USB口和PC卡式接口。RS232串行口和USB口一般都是外置式， PC卡式是为内置式
GPRS与PPP
CodeJoker的专栏
06-25 9422
From: http://topic.csdn.net/t/20030528/15/1845691.html 使用GPRS   MODEM上网，目前的实现方式是利用PPP作为中转，GPRS的传输层面是这样的：     --------     IP/X.25     --------       SNDCP     --------      
GPRS应用中TCP/IP/PPP基本概念
zhs_xa的专栏
02-29 1672
GPRS应用中TCP/IP/PPP基本概念： 实际上GPRS DTU上实现的是协议栈是TCP/IP Over PPP。我们在使用时必须要有一些相应的概念。因此在下面我们就与GPRS模块使用相关的一些事项作一些简要的说明，如果您想详细了解这些协议，请参见相关书籍： 1． 每一次GPRS模块拨ATD*99***1#(或ATD*99***1#)之后其实都在采用PPP协议和移动的接入设备（一般是移
linux pppoe内核模块,pppoe-server服务pap模式Connection terminated
weixin_35639750的博客
05-04 1197
启动pppoe进程/usr/sbin/pppoe-server -k -T 60 -I br-lan -N 100 -L 10.0.1.1 -R 10.0.1.2 # -k调用内核模块否则也是拨不上开始拨号chap可以，pap模式遇到的问题如下：pppoe-server[2379]: Session 6 created for client 64:00:6a:57:df:e2 (10.0.1.7...
ARM平台GPRS模块PPP拨号上网实战与学习
本文主要探讨了在Linux平台上使用GPRS模块进行PPP拨号上网的实践经验和心得。作者提到，尽管很多人认为这个过程相对简单，但由于自己在实际操作过程中遇到了诸多挑战，这个看似基础的任务实际上锻炼了他的分析能力和...
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值