Android recoveryUI方向修改(7.1+11)

有时候修改了屏幕的方向，recoveryUI的方向却没有跟着改变。

7.1系统修改recoveryUI方向

①新增文件graphics_rotate.cpp

• bootable/recovery/minui/graphics_rotate.cpp

/*
* Copyright (C) 2014 MediaTek Inc.
* Modification based on code covered by the mentioned copyright
* and/or permission notice(s).
*/

#include <stdbool.h>
#include <stdlib.h>
#include <unistd.h>
#include <inttypes.h>

#include <fcntl.h>
#include <stdio.h>

#include <sys/cdefs.h>
#include <sys/ioctl.h>
#include <sys/mman.h>
#include <sys/types.h>

#include <linux/fb.h>
#include <linux/kd.h>

#include "minui.h"
#include "graphics.h"

GRSurface __gr_canvas;

GRSurface* gr_canvas = NULL;
int rotate_index=-1;

static void print_surface_info(GRSurface *s, const char *name)
{
    printf("[graphics] %s > Height:%d, Width:%d, PixelBytes:%d, RowBytes:%d, Size:%d, Data: 0x%08" PRIxPTR "\n",
        name, s->height, s->width, s->pixel_bytes, s->row_bytes, s->height* s->row_bytes, (uintptr_t) s->data);
}

// Read configuration from LCM_PHYSICAL_ROTATION
#ifndef LCM_PHYSICAL_ROTATION
#define LCM_PHYSICAL_ROTATION "undefined"
#endif
static int rotate_config(GRSurface *gr_draw)
{
    printf("[graphics] %s > Height:%d, Width:%d, PixelBytes:%d, RowBytes:%d, Size:%d, Data: 0x%08" PRIxPTR "\n",
        name, s->height, s->width, s->pixel_bytes, s->row_bytes, s->height* s->row_bytes, (uintptr_t) s->data);
}

// Read configuration from LCM_PHYSICAL_ROTATION
#ifndef LCM_PHYSICAL_ROTATION
#define LCM_PHYSICAL_ROTATION "undefined"
#endif
static int rotate_config(GRSurface *gr_draw)
{
    if (rotate_index<0)
    {
        if (gr_draw->pixel_bytes != 4) rotate_index=0; // support 4 bytes pixel only
        else if (0 == strncmp(LCM_PHYSICAL_ROTATION, "90", 2)) rotate_index=1;
        else if (0 == strncmp(LCM_PHYSICAL_ROTATION, "180", 3)) rotate_index=2;
        else if (0 == strncmp(LCM_PHYSICAL_ROTATION, "270", 3)) rotate_index=3;
        else rotate_index=0;
        printf("[graphics] rotate_config %d %s\n", rotate_index, LCM_PHYSICAL_ROTATION);
    }
    return 3;
}

#define swap(x, y, type) {type z; z=x; x=y; y=z;}

// Allocate and setup the canvas object
void rotate_canvas_init(GRSurface *gr_draw)
{
    gr_canvas = &__gr_canvas;
    memcpy(gr_canvas, gr_draw, sizeof(GRSurface));

    // Swap canvas' height and width, if the rotate angle is 90" or 270"
    if (rotate_config(gr_draw)%2) {
        swap(gr_canvas->width, gr_canvas->height, int);
        gr_canvas->row_bytes = gr_canvas->width * gr_canvas->pixel_bytes;
    }

    gr_canvas->data = (unsigned char*) malloc(gr_canvas->height * gr_canvas->row_bytes);
    if (gr_canvas->data == NULL) {
        printf("[graphics] rotate_canvas_init() malloc gr_canvas->data failed\n");
        gr_canvas = NULL;
        return;
    }

    memset(gr_canvas->data,  0, gr_canvas->height * gr_canvas->row_bytes);

    print_surface_info(gr_draw, "gr_draw");
    print_surface_info(gr_canvas, "gr_canvas");
}

// Cleanup the canvas
void rotate_canvas_exit(void)
{
    if (gr_canvas) {
        if (gr_canvas->data)
            free(gr_canvas->data);
        free(gr_canvas);
    }
    gr_canvas=NULL;
}

// Return the canvas object
GRSurface *rotate_canvas_get(GRSurface *gr_draw)
{
    // Initialize the canvas, if it was not exist.
    if (gr_canvas==NULL)
        rotate_canvas_init(gr_draw);
    return gr_canvas;
}

// Surface Rotate Routines
static void rotate_surface_0(GRSurface *dst, GRSurface *src)
{
    memcpy(dst->data, src->data, src->height*src->row_bytes);
}

static void rotate_surface_270(GRSurface *dst, GRSurface *src)
{
    int v, w, h;
    unsigned int *src_pixel;
    unsigned int *dst_pixel;

    for (h=0, v=src->width-1; h<dst->height; h++, v--) {
        for (w=0; w<dst->width; w++) {
            dst_pixel = (unsigned int *)(dst->data + dst->row_bytes*h);
            src_pixel = (unsigned int *)(src->data + src->row_bytes*w);
            *(dst_pixel+w)=*(src_pixel+v);
        }
    }
}

static void rotate_surface_180(GRSurface *dst, GRSurface *src)
{
    int v, w, k, h;
    unsigned int *src_pixel;
    unsigned int *dst_pixel;

    for (h=0, k=src->height-1; h<dst->height && k>=0 ; h++, k--) {
        dst_pixel = (unsigned int *)(dst->data + dst->row_bytes*h);
        src_pixel = (unsigned int *)(src->data + src->row_bytes*k);
        for (w=0, v=src->width-1; w<dst->width && v>=0; w++, v--) {
            *(dst_pixel+w)=*(src_pixel+v);
        }
    }
}

static void rotate_surface_90(GRSurface *dst, GRSurface *src)
{
    int w, k, h;
    unsigned int *src_pixel;
    unsigned int *dst_pixel;

    for (h=0; h<dst->height; h++) {
        for (w=0, k=src->height-1; w<dst->width; w++, k--) {
            dst_pixel = (unsigned int *)(dst->data + dst->row_bytes*h);
            src_pixel = (unsigned int *)(src->data + src->row_bytes*k);
            *(dst_pixel+w)=*(src_pixel+h);
        }
    }
}

typedef void (*rotate_surface_t) (GRSurface *, GRSurface *);

rotate_surface_t rotate_func[4]=
{
    rotate_surface_0,
    rotate_surface_90,
    rotate_surface_180,
    rotate_surface_270
};

// rotate and copy src* surface to dst surface
void rotate_surface(GRSurface *dst, GRSurface *src)
{
    rotate_surface_t rotate;
    rotate=rotate_func[rotate_config(dst)];
    rotate(dst, src);
}

②新增文件graphics_rotate.h

• bootable/recovery/minui/graphics_rotate.h

/*
* Copyright (C) 2014 MediaTek Inc.
* Modification based on code covered by the mentioned copyright
* and/or permission notice(s).
*/

#ifndef MT_GRAPHICS_ROTATE_H_
#define MT_GRAPHICS_ROTATE_H_

#include "minui.h"

void rotate_canvas_exit(void);
void rotate_canvas_init(GRSurface *gr_draw);
void rotate_surface(GRSurface *dst, GRSurface *src);
GRSurface *rotate_canvas_get(GRSurface *gr_draw);

#endif

③graphics_rotate.cpp加入编译

• bootable/recovery/minui/Android.mk

LOCAL_PATH := $(call my-dir)
include $(CLEAR_VARS)

LOCAL_SRC_FILES := \
    events.cpp \
    graphics.cpp \
    graphics_adf.cpp \
    graphics_drm.cpp \
    graphics_fbdev.cpp \
    resources.cpp \
    graphics_rotate.cpp \

④修改graphics_fbdev.cpp

• bootable/recovery/minui/graphics_fbdev.cpp

include <stdbool.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>

#include <fcntl.h>
#include <stdio.h>

#include <sys/cdefs.h>
#include <sys/ioctl.h>
#include <sys/mman.h>
#include <sys/types.h>

#include <linux/fb.h>
#include <linux/kd.h>

#include "minui.h"
#include "graphics.h"
// add for recovery ui
#include "graphics_rotate.h"

static GRSurface* fbdev_init(minui_backend*);
static GRSurface* fbdev_flip(minui_backend*);
static void fbdev_blank(minui_backend*, bool);
static void fbdev_exit(minui_backend*);

static GRSurface gr_framebuffer[2];
static bool double_buffered;
static GRSurface* gr_draw = NULL;
static int displayed_buffer;

static fb_var_screeninfo vi;
static int fb_fd = -1;

static minui_backend my_backend = {
    .init = fbdev_init,
    .flip = fbdev_flip,
    .blank = fbdev_blank,
    .exit = fbdev_exit,
};

minui_backend* open_fbdev() {
    return &my_backend;
}

static void fbdev_blank(minui_backend* backend __unused, bool blank)
{
    int ret;

    ret = ioctl(fb_fd, FBIOBLANK, blank ? FB_BLANK_POWERDOWN : FB_BLANK_UNBLANK);
    if (ret < 0)
        perror("ioctl(): blank");
}

static void set_displayed_framebuffer(unsigned n)
{
    if (n > 1 || !double_buffered) return;

    vi.yres_virtual = gr_framebuffer[0].height * 2;
    vi.yoffset = n * gr_framebuffer[0].height;
    vi.bits_per_pixel = gr_framebuffer[0].pixel_bytes * 8;
    if (ioctl(fb_fd, FBIOPUT_VSCREENINFO, &vi) < 0) {
        perror("active fb swap failed");
    }
    displayed_buffer = n;
}

static GRSurface* fbdev_init(minui_backend* backend) {
    int fd = open("/dev/graphics/fb0", O_RDWR);
    if (fd == -1) {
        perror("cannot open fb0");
        return NULL;
    }

    fb_fix_screeninfo fi;
    if (ioctl(fd, FBIOGET_FSCREENINFO, &fi) < 0) {
        perror("failed to get fb0 info");
        close(fd);
        return NULL;
    }

    if (ioctl(fd, FBIOGET_VSCREENINFO, &vi) < 0) {
        perror("failed to get fb0 info");
        close(fd);
        return NULL;
    }
    
    // We print this out for informational purposes only, but
    // throughout we assume that the framebuffer device uses an RGBX
    // pixel format.  This is the case for every development device I
    // have access to.  For some of those devices (eg, hammerhead aka
    // Nexus 5), FBIOGET_VSCREENINFO *reports* that it wants a
    // different format (XBGR) but actually produces the correct
    // results on the display when you write RGBX.
    //
    // If you have a device that actually *needs* another pixel format
    // (ie, BGRX, or 565), patches welcome...
    
    printf("fb0 reports (possibly inaccurate):\n"
           "  vi.bits_per_pixel = %d\n"
           "  vi.red.offset   = %3d   .length = %3d\n"
           "  vi.green.offset = %3d   .length = %3d\n"
           "  vi.blue.offset  = %3d   .length = %3d\n",
           vi.bits_per_pixel,
           vi.red.offset, vi.red.length,
           vi.green.offset, vi.green.length,
           vi.blue.offset, vi.blue.length);

    void* bits = mmap(0, fi.smem_len, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
    if (bits == MAP_FAILED) {
        perror("failed to mmap framebuffer");
        close(fd);
        return NULL;
    }

    memset(bits, 0, fi.smem_len);
    
    gr_framebuffer[0].width = vi.xres;
    gr_framebuffer[0].height = vi.yres;
    gr_framebuffer[0].row_bytes = fi.line_length;
    gr_framebuffer[0].pixel_bytes = vi.bits_per_pixel / 8;
    gr_framebuffer[0].data = reinterpret_cast<uint8_t*>(bits);
    memset(gr_framebuffer[0].data, 0, gr_framebuffer[0].height * gr_framebuffer[0].row_bytes);

    /* check if we can use double buffering */
    if (vi.yres * fi.line_length * 2 <= fi.smem_len) {
        double_buffered = true;

        memcpy(gr_framebuffer+1, gr_framebuffer, sizeof(GRSurface));
        gr_framebuffer[1].data = gr_framebuffer[0].data +
            gr_framebuffer[0].height * gr_framebuffer[0].row_bytes;

        gr_draw = gr_framebuffer+1;
    } else {
        double_buffered = false;

        // Without double-buffering, we allocate RAM for a buffer to
        // draw in, and then "flipping" the buffer consists of a
        // memcpy from the buffer we allocated to the framebuffer.

        gr_draw = (GRSurface*) malloc(sizeof(GRSurface));
        memcpy(gr_draw, gr_framebuffer, sizeof(GRSurface));
        gr_draw->data = (unsigned char*) malloc(gr_draw->height * gr_draw->row_bytes);
        if (!gr_draw->data) {
            perror("failed to allocate in-memory surface");
            return NULL;
        }
    }
    
    memset(gr_draw->data, 0, gr_draw->height * gr_draw->row_bytes);
    fb_fd = fd;
    set_displayed_framebuffer(0);

    printf("framebuffer: %d (%d x %d)\n", fb_fd, gr_draw->width, gr_draw->height);

    fbdev_blank(backend, true);
    fbdev_blank(backend, false);

    // add for recovery ui
    // return gr_draw;
    return rotate_canvas_get(gr_draw);
    // end
}

static GRSurface* fbdev_flip(minui_backend* backend __unused) {
    // add for recovery ui
    rotate_surface(gr_draw, rotate_canvas_get(gr_draw));
    // end
    if (double_buffered) {
        // Change gr_draw to point to the buffer currently displayed,
        // then flip the driver so we're displaying the other buffer
        // instead.
        gr_draw = gr_framebuffer + displayed_buffer;
        set_displayed_framebuffer(1-displayed_buffer);
    } else {
        // Copy from the in-memory surface to the framebuffer.
        memcpy(gr_framebuffer[0].data, gr_draw->data,
               gr_draw->height * gr_draw->row_bytes);
    }
    // add for recovery ui
    //return gr_draw;
    return rotate_canvas_get(gr_draw);
    //end
}

static void fbdev_exit(minui_backend* backend __unused) {
    close(fb_fd);
    fb_fd = -1;

    // add for recovery ui
    rotate_canvas_exit();
    // end
    if (!double_buffered && gr_draw) {
        free(gr_draw->data);
        free(gr_draw);
    }
    gr_draw = NULL;
}

11.0系统修改recovUI方向

第一种方式

• bootable/recovery/minui/graphics.cpp

int gr_init() {
  // pixel_format needs to be set before loading any resources or initializing backends.
  std::string format = android::base::GetProperty("ro.minui.pixel_format", "");
  if (format == "ABGR_8888") {
    pixel_format = PixelFormat::ABGR;
  } else if (format == "RGBX_8888") {
    pixel_format = PixelFormat::RGBX;
  } else if (format == "ARGB_8888") {
    pixel_format = PixelFormat::ARGB;
  } else if (format == "BGRA_8888") {
    pixel_format = PixelFormat::BGRA;
  } else {
    pixel_format = PixelFormat::UNKNOWN;
  }

  int ret = gr_init_font("font", &gr_font);
  if (ret != 0) {
    printf("Failed to init font: %d, continuing graphic backend initialization without font file\n",
           ret);
  }
  
  auto backend = std::unique_ptr<MinuiBackend>{ std::make_unique<MinuiBackendAdf>() };
  gr_draw = backend->Init();

  if (!gr_draw) {
    backend = std::make_unique<MinuiBackendDrm>();
    gr_draw = backend->Init();
  }

  if (!gr_draw) {
    backend = std::make_unique<MinuiBackendFbdev>();
    gr_draw = backend->Init();
  }

  if (!gr_draw) {
    return -1;
  }

  gr_backend = backend.release();

  int overscan_percent = android::base::GetIntProperty("ro.minui.overscan_percent", 0);
  overscan_offset_x = gr_draw->width * overscan_percent / 100;
  overscan_offset_y = gr_draw->height * overscan_percent / 100;
  
  gr_flip();
  gr_flip();
  if (!gr_draw) {
    printf("gr_init: gr_draw becomes nullptr after gr_flip\n");
    return -1;
  }

  std::string rotation_str =
      android::base::GetProperty("ro.minui.default_rotation", "ROTATION_NONE");
  // add for recovery ui
  rotation_str = ROTATION_RIGHT；   
  // end
  if (rotation_str == "ROTATION_RIGHT") {
    gr_rotate(GRRotation::RIGHT);
  } else if (rotation_str == "ROTATION_DOWN") {
    gr_rotate(GRRotation::DOWN);
  } else if (rotation_str == "ROTATION_LEFT") {
    gr_rotate(GRRotation::LEFT);
  } else {  // "ROTATION_NONE" or unknown string
    gr_rotate(GRRotation::NONE);
  }

  if (gr_draw->pixel_bytes != 4) {
    printf("gr_init: Only 4-byte pixel formats supported\n");
  }

  return 0;
}

第二种方式

• device/mediateksample/{project}/BoardConfig.mk

# add for recovery ui
TARGET_RECOVERY_DEFAULT_ROTATION := ROTATION_RIGHT
# end