对接国标摄像头需要使用
SIP 协议进行通信，以下是整合 springboot 和
SIP 协议的代码示例：
1. 添加依赖
在 pom.xml 文件中添加以下依赖：
```xml
<dependency>
<group
Id>org.springframework.boot</group
Id>
<artifact
Id>spring-boot-starter-
sip</artifact
Id>
<version>2.4.5</version>
</dependency>
```
2. 配置
SIP
在 application.properties 文件中添加以下配置：
```properties
#
SIP server configuration
spring.
sip.server.address=192.168.0.1
spring.
sip.server.port=5060
spring.
sip.server.transport=udp
#
SIP client configuration
spring.
sip.client.address=192.168.0.2
spring.
sip.client.port=5060
spring.
sip.client.transport=udp
spring.
sip.client.username=username
spring.
sip.client.password=password
```
3. 编写代码
创建一个
SIP 消息监听器，用于处理
SIP 消息：
```java
@Component
public class
SipListener implements MessageListener {
@Autowired
private
SipSessionRegistry
sipSessionRegistry;
@Overr
ide
public vo
id onMessage(
SipMessage
sipMessage) {
// 处理
SIP 消息
}
}
```
创建一个
SIP 客户端，用于向
SIP 服务器发送请求：
```java
@Service
public class
SipClient {
@Autowired
private
SipSessionRegistry
sipSessionRegistry;
@Autowired
private
SipMessageFactory
sipMessageFactory;
@Autowired
private
SipClientTransactionFactory
sipClientTransactionFactory;
@Autowired
private
SipServerLocator
sipServerLocator;
public vo
id sendInvite(String address) throws Exception {
Request request =
sipMessageFactory.createRequest(
"INVITE", "
sip:" + address + ":5060", "
SIP/2.0");
// 添加必要的头部信息
request.addHeader("From", "<
sip:username@192.168.0.2>;
tag=123456");
request.addHeader("To", "<
sip:" + address + ":5060>");
request.addHeader("Call-
ID", UU
ID.randomUU
ID().toString());
request.addHeader("CSeq", "1 INVITE");
request.addHeader("Contact", "<
sip:username@192.168.0.2>");
request.addHeader("Content-Type", "application/sdp");
// 设置 SDP
String sdp = "v=0\r\n" +
"o=- 0 0 IN IP4 192.168.0.2\r\n" +
"s=Java
SIP Client\r\n" +
"c=IN IP4 192.168.0.2\r\n" +
"t=0 0\r\n" +
"m=v
ideo 5004 RTP/AVP 96\r\n" +
"a=rtpmap:96 H264/90000\r\n" +
"a=fmtp:96 packetization-mode=1; profile-level-
id=42001E; sprop-parameter-sets=Z00AH5pmDoAtyA==,aOvssiw=\r\n" +
"a=sendonly";
request.setContent(sdp, "application/sdp");
// 发送 INVITE 请求
SipClientTransaction transaction =
sipClientTransactionFactory.createClientTransaction(request);
transaction.sendRequest();
// 将会话保存到会话注册表中
SipSession session = new
SipSession();
session.setTransaction(transaction);
session.setRemoteAddress(address);
session.setRemotePort(5060);
sipSessionRegistry.addSession(session);
}
}
```
4. 调用
SIP 客户端
在需要发送 INVITE 请求的地方调用
SIP 客户端的 sendInvite 方法即可：
```java
@Autowired
private
SipClient
sipClient;
public vo
id sendInviteRequest(String address) throws Exception {
sipClient.sendInvite(address);
}
```
5. 配置国标摄像头
配置国标摄像头需要使用国标协议，以下是配置国标摄像头的代码示例：
```java
public vo
id configureCamera(String address) throws Exception {
// 创建
SIP 客户端
SipClient
sipClient = new
SipClient();
// 发送 INVITE 请求
sipClient.sendInvite(address);
// 等待响应
Thread.sleep(5000);
// 获取 SDP
SipSession session =
sipSessionRegistry.getSession(address);
String sdp = session.getResponse().getContent().toString();
// 解析 SDP 获取视频流地址
String v
ideoUrl = parseV
ideoUrlFromSdp(sdp);
// 配置国标摄像头
configureGbCamera(v
ideoUrl);
}
```
以上就是整合 springboot 和
SIP 协议进行国标摄像头对接的流程和代码示例。
4432
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
