AM335 uboot启动参数

include/env_default.h中：

#elif defined(DEFAULT_ENV_INSTANCE_STATIC)
static char default_environment[] = {
#else
const uchar default_environment[] = {
#endif
代码略
#ifdef	CONFIG_EXTRA_ENV_SETTINGS
	CONFIG_EXTRA_ENV_SETTINGS
#endif
代码略

CONFIG_EXTRA_ENV_SETTINGS定义在include/configs/am335x_evm.h中：

#define CONFIG_EXTRA_ENV_SETTINGS \
	"loadaddr=0x80200000\0" \
	"kloadaddr=0x80007fc0\0" \
	"fdtaddr=0x80F80000\0" \
	"fdt_high=0xffffffff\0" \
	"rdaddr=0x81000000\0" \
	"bootfile=uImage\0" \
	"fdtfile=\0" \
	"console=ttyO0,115200n8\0" \
	"optargs=\0" \
	"mtdids=" MTDIDS_DEFAULT "\0" \
	"mtdparts=" MTDPARTS_DEFAULT "\0" \
	"dfu_alt_info_mmc=" DFU_ALT_INFO_MMC "\0" \
	"dfu_alt_info_emmc=rawemmc mmc 0 3751936\0" \
	"dfu_alt_info_nand=" DFU_ALT_INFO_NAND "\0" \
	"mmcdev=1\0" \
	"mmcroot=/dev/mmcblk0p4 rw\0" \
	"mmcrootfstype=ext4 rootwait\0" \
	"nandroot=ubi0:rootfs rw ubi.mtd=7,2048\0" \
	"nandrootfstype=ubifs rootwait=1\0" \
	"nandsrcaddr=0x280000\0" \
	"nandimgsize=0x500000\0" \
	"rootpath=/export/rootfs\0" \
	"nfsopts=nolock\0" \
	"static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
		"::off\0" \
	"ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${rdaddr},64M\0" \
	"ramrootfstype=ext2\0" \
	"ip_method=off\0" \
	"bootargs_defaults=setenv bootargs " \
		"console=${console} " \
		"${optargs}\0" \
	"mmcargs=run bootargs_defaults;" \
		"setenv bootargs ${bootargs} " \
		"androidboot.console=ttyO0 " \
		"root=${mmcroot} " \
		"rootfstype=${mmcrootfstype} emmcboot init=/init ip=${ip_method}\0" \
	"nandargs=setenv bootargs console=${console} " \
		"${optargs} " \
		"root=${nandroot} " \
		"rootfstype=${nandrootfstype}\0" \
	"spiroot=/dev/mtdblock4 rw\0" \
	"spirootfstype=jffs2\0" \
	"spisrcaddr=0xe0000\0" \
	"spiimgsize=0x362000\0" \
	"spibusno=0\0" \
	"spiargs=setenv bootargs console=${console} " \
		"${optargs} " \
		"root=${spiroot} " \
		"rootfstype=${spirootfstype}\0" \
	"netargs=setenv bootargs console=${console} " \
		"${optargs} " \
		"root=/dev/nfs " \
		"nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
		"ip=dhcp\0" \
	"bootenv=uEnv.txt\0" \
	"loadbootenv=fatload mmc ${mmcdev}:3 ${loadaddr} ${bootenv}\0" \
	"importbootenv=echo Importing environment from mmc ...; " \
		"env import -t $loadaddr $filesize\0" \
	"ramargs=setenv bootargs console=${console} " \
		"${optargs} " \
		"root=${ramroot} " \
		"rootfstype=${ramrootfstype}\0" \
	"loadramdisk=fatload mmc ${mmcdev}:4 ${rdaddr} ramdisk.gz\0" \
	"loaduimagefat=fatload mmc ${mmcdev}:3 ${kloadaddr} ${bootfile}\0" \
	"loaduimage=fatload mmc ${mmcdev} ${kloadaddr} ${bootfile}\0" \	
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"bootm ${kloadaddr}\0" \
	"nandboot=echo Booting from nand ...; " \
		"run nandargs; " \
		"nand read ${loadaddr} ${nandsrcaddr} ${nandimgsize}; " \
		"bootm ${loadaddr}\0" \
	"spiboot=echo Booting from spi ...; " \
		"run spiargs; " \
		"sf probe ${spibusno}:0; " \
		"sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \
		"bootm ${loadaddr}\0" \
	"netboot=echo Booting from network ...; " \
		"setenv autoload no; " \
		"dhcp; " \
		"tftp ${loadaddr} ${bootfile}; " \
		"run netargs; " \
		"bootm ${loadaddr}\0" \
	"ramboot=echo Booting from ramdisk ...; " \
		"run ramargs; " \
		"bootm ${loadaddr}\0" \
	"findfdt="\
		"if test $board_name = A335BONE; then " \
			"setenv fdtfile am335x-bone.dtb; fi; " \
		"if test $board_name = A33515BB; then " \
			"setenv fdtfile am335x-evm.dtb; fi; " \
		"if test $board_name = A335X_SK; then " \
			"setenv fdtfile am335x-evmsk.dtb; fi\0"

这么多参数不是所有的都是有用的。

当uboot自动启动内核时，调用的命令是bootcmd，内核参数是bootargs

先看bootcmd，在include/env_default.h中：

#ifdef	CONFIG_BOOTCOMMAND
	"bootcmd="	CONFIG_BOOTCOMMAND		"\0"
#endif

CONFIG_BOOTCOMMAND的定义在am335x_evm.h中：

#define CONFIG_BOOTCOMMAND \
	"mmc dev ${mmcdev}; if mmc rescan; then " \
		"echo SD/MMC found on device ${mmcdev};" \
		"if run loadbootenv; then " \    看上面loadbootenv的定义，会发现这条命令会启动失败
			"echo Loaded environment from ${bootenv};" \
			"run importbootenv;" \
		"fi;" \
		"if test -n $uenvcmd; then " \
			"echo Running uenvcmd ...;" \
			"run uenvcmd;" \
		"fi;" \
		"if run loaduimagefat; then " \     这条会启动成功，看这条
			"run mmcboot;" \          这条命令会执行
		"elif run loaduimage; then " \
			"run mmcboot;" \
		"else " \
			"echo Could not find ${bootfile} ;" \
		"fi;" \
	"else " \
		"run nandboot;" \
	"fi;" \

loaduimagefat的定义：

loaduimagefat=fatload mmc ${mmcdev}:3 ${kloadaddr} ${bootfile}

当命令执行run mmcboot时，

	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"bootm ${kloadaddr}\0" \

当执行run mmcargs，

	"mmcargs=run bootargs_defaults;" \
		"setenv bootargs ${bootargs} " \
		"androidboot.console=ttyO0 " \
		"root=${mmcroot} " \
		"rootfstype=${mmcrootfstype} emmcboot init=/init ip=${ip_method}\0" \

这里使用setenv bootargs设置了内核启动参数。

启动参数是：

console=ttyO0,115200n8 androidboot.console=ttyO0 root=/dev/mmcblk0p4 rw rootfstype=ext4 rootwait emmcboot init=/init ip=off