Androidの使用AIDL调用系统打电话接口
1. 最近看了系统源码,需要使用打电话接口,顺便看了该AIDL
路径为:framework/base/core/telephony/com/android/internal/telephony;
interface ITelephony {
void dial(String number); //这个是拨打电话的
/**
* Place a call to the specified number.
* @param number the number to be called.
*/
void call(String callingPackage, String number);
/**
* If there is currently a call in progress, show the call screen.
* The DTMF dialpad may or may not be visible initially, depending on
* whether it was up when the user last exited the InCallScreen.
*
* @return true if the call screen was shown.
*/
boolean showCallScreen();
/**
* Variation of showCallScreen() that also specifies whether the
* DTMF dialpad should be initially visible when the InCallScreen
* comes up.
* @param showDialpad if true, make the dialpad visible initially,
* otherwise hide the dialpad initially.
* @return true if the call screen was shown.
* @see showCallScreen
*/
boolean showCallScreenWithDialpad(boolean showDialpad);
/**
* End call if there is a call in progress, otherwise does nothing.
* @return whether it hung up
*/
boolean endCall();
/**
* Answer the currently-ringing call.
*
* If there's already a current active call, that call will be
* automatically put on hold. If both lines are currently in use, the
* current active call will be ended.
*
* TODO: provide a flag to let the caller specify what policy to use
* if both lines are in use. (The current behavior is hardwired to
* "answer incoming, end ongoing", which is how the CALL button
* is specced to behave.)
*
* TODO: this should be a oneway call (especially since it's called
* directly from the key queue thread).
*/
void answerRingingCall();
/**
* Silence the ringer if an incoming call is currently ringing.
* (If vibrating, stop the vibrator also.)
*
* It's safe to call this if the ringer has already been silenced, or
* even if there's no incoming call. (If so, this method will do nothing.)
*
* TODO: this should be a oneway call too (see above).
* (Actually *all* the methods here that return void can
* probably be oneway.)
*/
void silenceRinger();
/**
* Check if we are in either an active or holding call
* @return true if the phone state is OFFHOOK.
*/
boolean isOffhook();
/**
* Check if an incoming phone call is ringing or call waiting.
* @return true if the phone state is RINGING.
*/
boolean isRinging();
/**
* Check if the phone is idle.
* @return true if the phone state is IDLE.
*/
boolean isIdle();
/**
* Check to see if the radio is on or not.
* @return returns true if the radio is on.
*/
boolean isRadioOn();
/**
* Check if the SIM pin lock is enabled.
* @return true if the SIM pin lock is enabled.
*/
boolean isSimPinEnabled();
以上附上部分接口。
2. 使用过程
首先在自己项目中添加路径文件夹:com/android/internal/telephony
然后将该 aidl 文件复制到该路径下,即可。
再次再调用过程中,需要添加
try {
iTel = ITelephony.Stub.asInterface(ServiceManager.getService(Context.TELEPHONY_SERVICE));
iTel.call("这里是自己项目中的包名", "这里是拨打电话号码——顾文");
} catch (RemoteException e) {
e.printStackTrace();
}
使用可以不用bindservice() 来绑定该service。
以上即可调用打电话aidl 了。
3. 打电话 adil 文件下载地址: