1 所谓系统服务(service),就是随系统启动而启动,随系统关闭而关闭的程序。
2 命令介绍
service命令:可以启动、停止、重新启动和关闭系统服务,还可以显示所有系统服务的当前状态。(当前会话),是去/etc/init.d目录下寻找相应的服务,进行开启和关闭等操作。
chkconfig命令:控制在系统启动的时候是否自动开启,系统关闭前是否自动关闭。(永久性)
systemctl命令:系统服务管理器指令,它实际上将 service 和 chkconfig 这两个命令组合到一起。
3 示例介绍
使用service启动服务实际上也是调用systemctl命令。
[root@localhost ~]# service httpd start
Redirecting to /bin/systemctl start httpd.service
4 systemctl命令的用法
Systemd是一个系统管理守护进程、工具和库的集合,用于取代System V初始进程。Systemd的功能是用于集中管理和配置类UNIX系统。systemd即为system daemon,是linux下的一种init软件。
服务存储目录
systemctl服务主体存贮目录:
/usr/lib/systemd/system/
systemctl服务开机启动链接存贮目录:
/etc/systemd/system/basic.target.wants/
Systemctl命令常见用法:
(1)列出所有可用单元:
[root@localhost ~]# systemctl list-unit-files
UNIT FILE STATE
proc-sys-fs-binfmt_misc.automount static
dev-hugepages.mount static
dev-mqueue.mount static
proc-fs-nfsd.mount static
proc-sys-fs-binfmt_misc.mount static
sys-fs-fuse-connections.mount static
sys-kernel-config.mount static
sys-kernel-debug.mount static
tmp.mount disabled
var-lib-nfs-rpc_pipefs.mount static
brandbot.path disabled
cups.path enabled
(2)列出所有可用单元:
[root@localhost ~]# systemctl list-units
UNIT LOAD ACTIVE SUB DESCRIPTION
proc-sys-fs-binfmt_misc.automount loaded active waiting Arbitrary
sys-devices-pci0000:00-0000:00:10.0-host2-target2:0:0-2:0:0:0-block-sda
sys-devices-pci0000:00-0000:00:10.0-host2-target2:0:0-2:0:0:0-block-sda
sys-devices-pci0000:00-0000:00:10.0-host2-target2:0:0-2:0:0:0-block-sda
sys-devices-pci0000:00-0000:00:10.0-host2-target2:0:1-2:0:1:0-block-sdb
sys-devices-pci0000:00-0000:00:10.0-host2-target2:0:1-2:0:1:0-block-sdb
sys-devices-pci0000:00-0000:00:11.0-0000:02:01.0-net-ens33.device loade
sys-devices-pci0000:00-0000:00:11.0-0000:02:02.0-sound-card0.device lo
(3)列出所有失败单元:
[root@localhost ~]# systemctl --failed
UNIT LOAD ACTIVE SUB DESCRIPTION
● network.service loaded failed failed LSB: Bring up/down networking
● teamd@team0.service loaded failed failed Team Daemon for device team0
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB
SUB = The low-level unit activation state, values depend on unit type.
2 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
(4)检查某个单元是否启动:
[root@localhost ~]# systemctl is-enabled httpd.service
enabled
(5)检查某个服务的运行状态:
[root@localhost ~]# systemctl status httpd.service
● httpd.service - The Apache HTTP Server
Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled; vendor preset: disabled)
Active: active (running) since 日 2018-10-14 18:21:46 CST; 1 day 2h ago
Docs: man:httpd(8)
man:apachectl(8)
Main PID: 19020 (httpd)
Status: "Total requests: 0; Current requests/sec: 0; Current traffic: 0 B/sec"
CGroup: /system.slice/httpd.service
├─19020 /usr/sbin/httpd -DFOREGROUND
├─27310 /usr/sbin/httpd -DFOREGROUND
├─27311 /usr/sbin/httpd -DFOREGROUND
├─27312 /usr/sbin/httpd -DFOREGROUND
├─27313 /usr/sbin/httpd -DFOREGROUND
└─27314 /usr/sbin/httpd -DFOREGROUND
10月 14 18:21:46 localhost systemd[1]: Starting The Apache HTTP Serv....
10月 14 18:21:46 localhost httpd[19020]: AH00558: httpd: Could not r...e
(6)列出所有服务:
[root@localhost ~]# systemctl list-unit-files --type=service
UNIT FILE STATE
abrt-ccpp.service enabled
abrt-oops.service enabled
abrt-pstoreoops.service disabled
abrt-xorg.service enabled
abrtd.service enabled
accounts-daemon.service enabled
alsa-restore.service static
alsa-state.service static
alsa-store.service static
arp-ethers.service disabled
atd.service disabled
auditd.service enabled
auth-rpcgss-module.service static
(7)启动,停止,重启服务等:
[root@localhost ~]# systemctl restart httpd.service
# systemctl restart httpd.service
# systemctl stop httpd.service
# systemctl reload httpd.service
# systemctl status httpd.service
(8)查询服务是否激活,和配置是否开机启动:
[root@localhost ~]# systemctl is-active httpd
active
[root@localhost ~]# systemctl disable httpd
Removed symlink /etc/systemd/system/multi-user.target.wants/httpd.service.
[root@localhost ~]# systemctl enable httpd
Created symlink from /etc/systemd/system/multi-user.target.wants/httpd.service to /usr/lib/systemd/system/httpd.service.
(9)使用systemctl命令杀死服务:
[root@localhost ~]# systemctl kill httpd
(10)列出系统的各项服务,挂载,设备等:
[root@localhost ~]# systemctl list-unit-files --type
automount device path snapshot swap timer
busname mount service socket target
(11)获得系统默认启动级别和设置默认启动级别:
[root@localhost ~]# systemctl get-default
graphical.target
[root@localhost ~]# systemctl set-default multi-user.target
(12)启动运行等级:
systemctl isolate multiuser.target
(13)重启、停止,挂起、休眠系统等:
# systemctl reboot
# systemctl halt
# systemctl suspend
# systemctl hibernate
# systemctl hybrid-sleep
5 : chkconfig可以更新(启动或停止)和查询系统服务(service)运行级信息。更简单一点,chkconfig是一个用于维护/etc/rc[0-6].d目录的命令行工具。
chkconfig常见用法:
[root@localhost ~]# chkconfig --help
chkconfig 版本 1.7.2 - 版权 (C) 1997-2000 红帽公司
在 GNU 公共许可条款下,本软件可以自由重发行。
用法:chkconfig [--list] [--type <类型>] [名称]
chkconfig --add <名称>
chkconfig --del <名称>
chkconfig --override <名称>
chkconfig [--level <级别>] [--type <类型>] <名称> <on|off|reset|resetpriorities>
(一)设置service开机是否启动:
chkconfig <name> on/off/reset
on、off、reset用于改变service的启动信息。
on表示开启,off表示关闭,reset表示重置。
默认情况下,on和off开关只对运行级2,3,4,5有效,reset可以对所有运行级有效。
[root@localhost ~]# chkconfig httpd on
注意:正在将请求转发到“systemctl enable httpd.service”。
在Redhat7上,运行chkconfig命令,都会被转到systemcle命令上。
(2)设置service运行级别:
chkconfig --level levels
该命令可以用来指定服务的运行级别,即指定运行级别2,3,4,5等。
等级0表示:表示关机
等级1表示:单用户模式
等级2表示:无网络连接的多用户命令行模式
等级3表示:有网络连接的多用户命令行模式
等级4表示:不可用
等级5表示:带图形界面的多用户模式
等级6表示:重新启动
例如:
[root@localhost ~]# chkconfig --level 5 httpd on
注意:正在将请求转发到“systemctl enable httpd.service”
(三)列出service启动信息:
# chkconfig --list [name]
如果不指定name,会列出所有services的信息。
每个service每个运行级别都会有一个启动和停止脚本;当切换运行级别时,init不会重启已经启动的service,也不会重新停止已经停止的service。
例如:
[root@localhost ~]# chkconfig --list
注意:该输出结果只显示 SysV 服务,并不包含原生 systemd 服务。SysV 配置数据可能被原生 systemd 配置覆盖。
如果您想列出 systemd 服务,请执行 'systemctl list-unit-files'。
欲查看对特定 target 启用的服务请执行
'systemctl list-dependencies [target]'。
netconsole 0:关 1:关 2:关 3:关 4:关 5:关 6:关
network 0:关 1:关 2:开 3:开 4:开 5:开 6:关
rhnsd 0:关 1:关 2:开 3:开 4:开 5:开 6:关
linux 运行级别:http://www.360doc.com/content/14/0107/15/13084517_343330992.shtml
不同运行级别之间的 差别的在于系统默认起动的服务的不同。