linux -- centos 下网卡配置文件ifcfg-eth*的选项说明

在cent-os中，你可以redhat-config-network工具非常方便的配置网络信息。如果你没有安装这个工具也没关系，你可以通过直接编辑/etc/sysconfig/network-scripts/下面的网卡配置文件来进行配置，下面说明一下网卡配置文件夹的各个选项参数：

 

• BOOTPROTO=<protocol> , where <protocol> is one of the following:

  • none — No boot-time protocol should be used.

  • bootp — The BOOTP protocol should be used.

  • dhcp — The DHCP protocol should be used.

• BROADCAST=<address> , where <address> is the broadcast address. This directive is deprecated.

• DEVICE=<name> , where <name> is the name of the physical device (except for dynamically-allocated PPP devices where it is the logical name ).

• DNS{1,2} =<address> , where <address> is a name server address to be placed in /etc/resolv.conf if the PEERDNS directive is set to yes .

• IPADDR=<address> , where <address> is the IP address.

• NETMASK=<mask> , where <mask> is the netmask value.

• NETWORK=<address> , where <address> is the network address. This directive is deprecated.

• ONBOOT=<answer> , where <answer> is one of the following:

  • yes — This device should be activated at boot-time.

  • no — This device should not be activated at boot-time.

• PEERDNS=<answer> , where <answer> is one of the following:

  • yes — Modify /etc/resolv.conf if the DNS directive is set. If using DCHP, then yes is the default.

  • no — Do not modify /etc/resolv.conf .

• SRCADDR=<address> , where <address> is the specified source IP address for outgoing packets.

• USERCTL=<answer> , where <answer> is one of the following:

  • yes — Non-root users are allowed to control this device.

  • no — Non-root users are not allowed to control this device.