ocp-142

QUESTION NO: 142
You are an Oracle DBA responsible for an ASM instance. The disk controller on your system fails. You
suspect that the disk itself is okay. You know it will take 24 hours to replace the controller and you don’t
want to have to rebuild the disks from scratch. What do you do?
A. Take the whole disk group offline and wait for the controller card to be installed. Once it’s installed,
bring the disk group online again.
B. Change the ASM parameter ASM_PREFERRED_READ_FAILURE_GROUPS to indicate that you
want to read from the non-failed disk. Once the disk controller is replaced, reset the parameter to its
original value.
C. You have no choice but to rebuild the disk. Drop the disk from the disk group and wait for the controller
to be replaced. Once the controller is replaced, add the disk back into the disk group and allow ASM to
rebuild it.
D. If you are using any setting other than REDUNDANCY EXTERNAL for your disk group, you will have to
recover any data on that disk from a backup. The database will be unavailable until you can correct the
problem and perform recovery.
E. Change the attribute DISK_REPAIR_TIME on the disk group to a time greater than 24 hours.

Answer: E

---

你是一个Oracle DBA负责ASM实例。在
您的系统上的磁盘控制器失效了。您怀疑磁盘本身是好的。你知道这将需要24小时才能更换控制器并且你
不想从擦伤中重建磁盘。你会怎么做？
E.更改磁盘组上磁盘修复时间的属性为一个大于24小时的时间。

---