11. Container With Most Water
Given n non-negative integers a1, a2, …, an , where each represents a point at coordinate (i, ai). n vertical lines are drawn such that the two endpoints of line i is at (i, ai) and (i, 0). Find two lines, which together with x-axis forms a container, such that the container contains the most water.
Note: You may not slant the container and n is at least 2.
The above vertical lines are represented by array [1,8,6,2,5,4,8,3,7]. In this case, the max area of water (blue section) the container can contain is 49.
Easy Concise Java O(N) Solution with Proof and Explanation：
AKA, the general idea to find some max is to go through all cases where max value can possibly occur and keep updating the max value.
The efficiency of the scan depends on the size of cases you plan to scan. To increase efficiency, all we need to do is to find a smart way of scan to cut off the useless cases and meanwhile 100% guarantee the max value can be reached through the rest of cases.
In this problem, the smart scan way is to set two pointers initialized at both ends of the array. Every time move the smaller value pointer to inner array. Then after the two pointers meet, all possible max cases have been scanned and the max situation is 100% reached somewhere in the scan. Following is a brief prove of this.
Given a1,a2,a3…an as input array. Lets assume a10 and a20 are the max area situation. We need to prove that a10 can be reached by left pointer and during the time left pointer stays at a10, a20 can be reached by right pointer. That is to say, the core problem is to prove: when left pointer is at a10 and right pointer is at a21, the next move must be right pointer to a20.
Since we are always moving the pointer with the smaller value, i.e. if a10 > a21, we should move pointer at a21 to a20, as we hope. Why a10 >a21? Because if a21>a10, then area of a10 and a20 must be less than area of a10 and a21. Because the area of a10 and a21 is at least height[a10] * (21-10) while the area of a10 and a20 is at most height[a10] * (20-10). So there is a contradiction of assumption a10 and a20 has the max area. So, a10 must be greater than a21, then next move a21 has to be move to a20. The max cases must be reached.
class Solution {
public int maxArea(int[] height) {
int left = 0, right = height.length - 1;
int maxArea = 0;
while (left < right) {
maxArea = Math.max(maxArea, Math.min(height[left], height[right])
* (right - left));
if (height[left] < height[right])
left++;
else
right--;
}
return maxArea;
}
}
15. 3Sum
Given an array nums of n integers, are there elements a, b, c in nums such that a + b + c = 0? Find all unique triplets in the array which gives the sum of zero.
Note:
The solution set must not contain duplicate triplets.
Concise O(N^2) Java solution：
The idea is to sort an input array and then run through all indices of a possible first element of a triplet. For each possible first element we make a standard bi-directional 2Sum sweep of the remaining part of the array. Also we want to skip equal elements to avoid duplicates in the answer without making a set or smth like that.
class Solution {
public List<List<Integer>> threeSum(int[] num) {
Arrays.sort(num);
List<List<Integer>> res = new LinkedList<>();
for (int i = 0; i < num.length-2; i++) {
if (i == 0 || (i > 0 && num[i] != num[i-1])) {
int lo = i+1, hi = num.length-1, sum = 0 - num[i];
while (lo < hi) {
if (num[lo] + num[hi] == sum) {
res.add(Arrays.asList(num[i], num[lo], num[hi]));
while (lo < hi && num[lo] == num[lo+1]) lo++;
while (lo < hi && num[hi] == num[hi-1]) hi--;
lo++; hi--;
} else if (num[lo] + num[hi] < sum) lo++;
else hi--;
}
}
}
return res;
}
}
31. Next Permutation
Implement next permutation, which rearranges numbers into the lexicographically next greater permutation of numbers.
If such arrangement is not possible, it must rearrange it as the lowest possible order (ie, sorted in ascending order).
The replacement must be in-place and use only constant extra memory.
Here are some examples. Inputs are in the left-hand column and its corresponding outputs are in the right-hand column.
Share O(n) time solution：
My idea is for an array:
- Start from its last element, traverse backward to find the first one with index i that satisfy num[i-1] < num[i]. So, elements from num[i] to num[n-1] is reversely sorted.
- To find the next permutation, we have to swap some numbers at different positions, to minimize the increased amount, we have to make the highest changed position as high as possible. Notice that index larger than or equal to i is not possible as num[i,n-1] is reversely sorted. So, we want to increase the number at index i-1, clearly, swap it with the smallest number between num[i,n-1] that is larger than num[i-1]. For example, original number is 121543321, we want to swap the ‘1’ at position 2 with ‘2’ at position 7.
- The last step is to make the remaining higher position part as small as possible, we just have to reversely sort the num[i,n-1]
The following is my code:
class Solution {
public void nextPermutation(int[] num) {
int n=num.length;
if(n<2)
return;
int index=n-1;
while(index>0){
if(num[index-1]<num[index])
break;
index--;
}
if(index==0){
reverseSort(num,0,n-1);
return;
}
else{
int val=num[index-1];
int j=n-1;
while(j>=index){
if(num[j]>val)
break;
j--;
}
swap(num,j,index-1);
reverseSort(num,index,n-1);
return;
}
}
public void swap(int[] num, int i, int j){
int temp=0;
temp=num[i];
num[i]=num[j];
num[j]=temp;
}
public void reverseSort(int[] num, int start, int end){
if(start>end)
return;
for(int i=start;i<=(end+start)/2;i++)
swap(num,i,start+end-i);
}
}
33. Search in Rotated Sorted Array
Suppose an array sorted in ascending order is rotated at some pivot unknown to you beforehand.
(i.e., [0,1,2,4,5,6,7] might become [4,5,6,7,0,1,2]).
You are given a target value to search. If found in the array return its index, otherwise return -1.
You may assume no duplicate exists in the array.
Your algorithm’s runtime complexity must be in the order of O(log n).
Concise O(log N) Binary search solution：
class Solution {
public:
int search(int A[], int n, int target) {
int lo=0,hi=n-1;
// find the index of the smallest value using binary search.
// Loop will terminate since mid < hi, and lo or hi will shrink by at least 1.
// Proof by contradiction that mid < hi: if mid==hi, then lo==hi and loop would have been terminated.
while(lo<hi){
int mid=(lo+hi)/2;
if(A[mid]>A[hi]) lo=mid+1;
else hi=mid;
}
// lo==hi is the index of the smallest value and also the number of places rotated.
int rot=lo;
lo=0;hi=n-1;
// The usual binary search and accounting for rotation.
while(lo<=hi){
int mid=(lo+hi)/2;
int realmid=(mid+rot)%n;
if(A[realmid]==target)return realmid;
if(A[realmid]<target)lo=mid+1;
else hi=mid-1;
}
return -1;
}
};
34. Find First and Last Position of Element in Sorted Array
Given an array of integers nums sorted in ascending order, find the starting and ending position of a given target value.
Your algorithm’s runtime complexity must be in the order of O(log n).
If the target is not found in the array, return [-1, -1].
A very simple Java solution, with only one binary search algorithm：
public class Solution {
public int[] searchRange(int[] A, int target) {
int start = Solution.firstGreaterEqual(A, target);
if (start == A.length || A[start] != target) {
return new int[]{-1, -1};
}
return new int[]{start, Solution.firstGreaterEqual(A, target + 1) - 1};
}
//find the first number that is greater than or equal to target.
//could return A.length if target is greater than A[A.length-1].
//actually this is the same as lower_bound in C++ STL.
private static int firstGreaterEqual(int[] A, int target) {
int low = 0, high = A.length;
while (low < high) {
int mid = low + ((high - low) >> 1);
//low <= mid < high
if (A[mid] < target) {
low = mid + 1;
} else {
//should not be mid-1 when A[mid]==target.
//could be mid even if A[mid]>target because mid<high.
high = mid;
}
}
return low;
}
}
39. Combination Sum
Given a set of candidate numbers (candidates) (without duplicates) and a target number (target), find all unique combinations in candidates where the candidate numbers sums to target.
The same repeated number may be chosen from candidates unlimited number of times.
Note:
—All numbers (including target) will be positive integers.
—The solution set must not contain duplicate combinations.
Java solution using recursive：
public class Solution {
public List<List<Integer>> combinationSum(int[] candidates, int target) {
Arrays.sort(candidates);
List<List<Integer>> result = new ArrayList<List<Integer>>();
getResult(result, new ArrayList<Integer>(), candidates, target, 0);
return result;
}
private void getResult(List<List<Integer>> result, List<Integer> cur, int candidates[], int target, int start){
if(target > 0){
for(int i = start; i < candidates.length && target >= candidates[i]; i++){
cur.add(candidates[i]);
getResult(result, cur, candidates, target - candidates[i], i);
cur.remove(cur.size() - 1);
}//for
}//if
else if(target == 0 ){
result.add(new ArrayList<Integer>(cur));
}//else if
}
}
48. Rotate Image
You are given an n x n 2D matrix representing an image.
Rotate the image by 90 degrees (clockwise).
Note:
You have to rotate the image in-place, which means you have to modify the input 2D matrix directly. DO NOT allocate another 2D matrix and do the rotation.
AC Java in place solution with explanation Easy to understand：
The idea was firstly transpose the matrix and then flip it symmetrically. For instance,
after transpose, it will be swap(matrix[i][j], matrix[j][i])
Then flip the matrix horizontally. (swap(matrix[i][j], matrix[i][matrix.length-1-j])
Hope this helps.
public class Solution {
public void rotate(int[][] matrix) {
for(int i = 0; i<matrix.length; i++){
for(int j = i; j<matrix[0].length; j++){
int temp = 0;
temp = matrix[i][j];
matrix[i][j] = matrix[j][i];
matrix[j][i] = temp;
}
}
for(int i =0 ; i<matrix.length; i++){
for(int j = 0; j<matrix.length/2; j++){
int temp = 0;
temp = matrix[i][j];
matrix[i][j] = matrix[i][matrix.length-1-j];
matrix[i][matrix.length-1-j] = temp;
}
}
}
}
55. Jump Game
Given an array of non-negative integers, you are initially positioned at the first index of the array.
Each element in the array represents your maximum jump length at that position.
Determine if you are able to reach the last index.
Simplest O(N) solution with constant space
Idea is to work backwards from the last index. Keep track of the smallest index that can “jump” to the last index. Check whether the current index can jump to this smallest index.
class Solution {
public bool canJump(int A[], int n) {
int last=n-1,i,j;
for(i=n-2;i>=0;i--){
if(i+A[i]>=last)last=i;
}
return last<=0;
}
}
56. Merge Intervals
Given a collection of intervals, merge all overlapping intervals.
A simple Java solution：
The idea is to sort the intervals by their starting points. Then, we take the first interval and compare its end with the next intervals starts. As long as they overlap, we update the end to be the max end of the overlapping intervals. Once we find a non overlapping interval, we can add the previous “extended” interval and start over.
Sorting takes O(n log(n)) and merging the intervals takes O(n). So, the resulting algorithm takes O(n log(n)).
I used an a lambda comparator (Java 8) and a for-each loop to try to keep the code clean and simple.
/**
* Definition for an interval.
* public class Interval {
* int start;
* int end;
* Interval() { start = 0; end = 0; }
* Interval(int s, int e) { start = s; end = e; }
* }
*/
class Solution {
public List<Interval> merge(List<Interval> intervals) {
if (intervals.size() <= 1)
return intervals;
// Sort by ascending starting point using an anonymous Comparator
intervals.sort((i1, i2) -> Integer.compare(i1.start, i2.start));
List<Interval> result = new LinkedList<Interval>();
int start = intervals.get(0).start;
int end = intervals.get(0).end;
for (Interval interval : intervals) {
if (interval.start <= end) // Overlapping intervals, move the end if needed
end = Math.max(end, interval.end);
else { // Disjoint intervals, add the previous one and reset bounds
result.add(new Interval(start, end));
start = interval.start;
end = interval.end;
}
}
// Add the last interval
result.add(new Interval(start, end));
return result;
}
}
62. Unique Paths
A robot is located at the top-left corner of a m x n grid (marked ‘Start’ in the diagram below).
The robot can only move either down or right at any point in time. The robot is trying to reach the bottom-right corner of the grid (marked ‘Finish’ in the diagram below).
How many possible unique paths are there?
Above is a 7 x 3 grid. How many possible unique paths are there?
Note: m and n will be at most 100.
AC solution using formula：
Binomial coefficient:
class Solution {
public int uniquePaths(int m, int n) {
int uniquePaths(int m, int n) {
int N = n + m - 2;// how much steps we need to do
int k = m - 1; // number of steps that need to go down
double res = 1;
// here we calculate the total possible path number
// Combination(N, k) = n! / (k!(n - k)!)
// reduce the numerator and denominator and get
// C = ( (n - k + 1) * (n - k + 2) * ... * n ) / k!
for (int i = 1; i <= k; i++)
res = res * (N - k + i) / i;
return (int)res;
}
}
First of all you should understand that we need to do n + m - 2 movements : m - 1 down, n - 1 right, because we start from cell (1, 1).
Secondly, the path it is the sequence of movements( go down / go right),therefore we can say that two paths are different when there is i-th (1 … m + n - 2) movement in path1 differ i-th movement in path2.
So, how we can build paths.Let’s choose (n - 1) movements(number of steps to the right) from (m + n - 2), and rest (m - 1) is (number of steps down).
I think now it is obvious that count of different paths are all combinations (n - 1) movements from (m + n-2).
扫一扫
1068
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
