锐捷交换机堆叠配置

1、主配置
Ruijie_1(config)#switch virtual domain 102
Ruijie_1(config-vs-domain)#switch 1
Ruijie_1(config-vs-domain)#switch 1 priority 200    #优先级高的为主
Ruijie_1(config-vs-domain)#switch 1 description Sw1
Ruijie_1(config)#vsl-port
Ruijie_1(config-vsl-port)#port-member interface HundredGigabitEthernet 0/51
Ruijie_1(config-vsl-port)#port-member interface HundredGigabitEthernet 0/52
Ruijie_1#wr     #必需先保存配置再转换模式
Ruijie_1#switch convert mode virtual     #转换模式后设备自动重启

2、备配置
Ruijie_2(config)#switch virtual domain 102
Ruijie_2(config-vs-domain)#switch 2 priority 100    #不能先配置优先级，需先更改switch ID
% Failed to configure device priority for the reason current configured switch is 1.
Ruijie_2(config-vs-domain)#switch 2
Ruijie_2(config-vs-domain)#switch 2 priority 100
Ruijie_2(config-vs-domain)#switch 2 description Sw2
Ruijie_2(config)#vsl-port
Ruijie_2(config-vsl-port)#port-member interface HundredGigabitEthernet 0/51
Ruijie_2(config-vsl-port)#port-member interface HundredGigabitEthernet 0/52
Ruijie_2#wr    #必需先保存配置再转换模式
Ruijie_2#switch convert mode virtual     #转换模式后设备自动重启

3、堆叠优化配置，bfd检测、聚合端口检测二选一
Ruijie(config)#switch virtual domain 102
Ruijie(config-vs-domain)#dual-active detection bfd
Ruijie(config-vs-domain)#dual-active bfd interface mgmt 1/0
Ruijie(config-vs-domain)#dual-active detection aggregateport
Ruijie(config-vs-domain)#dual-active interface aggregatePort 1
Ruijie(config-vs-domain)#switch cfg_mode single
Ruijie(config-vs-domain)#dual-active auto-recovery enable

4、堆叠状态检查
Ruijie#show switch virtual config    #查看堆叠配置
Ruijie#show switch virtual role
Ruijie(config)#redundancy forceswitch    #锐捷主备切换
Ruijie#show switch virtual link
Ruijie#show switch virtual

配置示例

switch virtual domain 100
 devid:1 sn:xxxxxxxxxx
 switch 1 priority 200
 switch 1 description sw1
 devid:2 sn:xxxxxxxxxx
 switch 2 priority 100
 switch 2 description sw2
 switch convert mode virtual
 switch cfg_mode single
 dual-active detection bfd
 dual-active bfd interface Mgmt 1/0
 dual-active bfd interface Mgmt 2/0
 dual-active auto-recovery enable
!
vsl-port
 port-member interface FortyGigabitEthernet 1/0/53
 port-member interface FortyGigabitEthernet 1/0/54
 port-member interface FortyGigabitEthernet 2/0/53
 port-member interface FortyGigabitEthernet 2/0/54

 参考链接：https://search.ruijie.com.cn:8447/rqs/preview.html?#ie=utf-8&wd=eHAiOjE1NDU4NzUxNDcsIm5iZiI6MTU0NTYxNTk0N302018092015041100299LqqZuvMhE7V7Ygl6r5RWsTHbWazT     #VSU基本配置