Struts2配置文件之default.properties

该配置文件位于struts2核心jar包中的org.apache.struts2包中，请注意该配置文件的第23行有一句为：can be overridden by a struts.properties file in the root of the classpath，表示该配置文件可以被struts.properties所覆盖，但是覆盖后的struts.properties文件必须要放在classpath的根路径，即编写时应放在src下，编译后对应classpath根路径。

#  $Id: Action.java 502296 2007-02-01 17:33:39Z niallp $
# 
#  Licensed to the Apache Software Foundation (ASF) under one
#  or more contributor license agreements.  See the NOTICE file
#  distributed with this work for additional information
#  regarding copyright ownership.  The ASF licenses this file
#  to you under the Apache License, Version 2.0 (the
#  "License"); you may not use this file except in compliance
#  with the License.  You may obtain a copy of the License at
# 
#   http://www.apache.org/licenses/LICENSE-2.0
# 
#  Unless required by applicable law or agreed to in writing,
#  software distributed under the License is distributed on an
#  "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
#  KIND, either express or implied.  See the License for the
#  specific language governing permissions and limitations
#  under the License.

### START SNIPPET: complete_file

### Struts default properties
###(can be overridden by a struts.properties file in the root of the classpath)
###

### Specifies the Configuration used to configure Struts 
### one could extend org.apache.struts2.config.Configuration
### to build one's customize way of getting the configurations parameters into Struts
# struts.configuration=org.apache.struts2.config.DefaultConfiguration

### This can be used to set your default locale and encoding scheme
# struts.locale=en_US
struts.i18n.encoding=UTF-8

### if specified, the default object factory can be overridden here
### Note: short-hand notation is supported in some cases, such as "spring"
###       Alternatively, you can provide a com.opensymphony.xwork2.ObjectFactory subclass name here  
# struts.objectFactory = spring

### specifies the autoWiring logic when using the SpringObjectFactory.
### valid values are: name, type, auto, and constructor (name is the default)
struts.objectFactory.spring.autoWire = name

### indicates to the struts-spring integration if Class instances should be cached
### this should, until a future Spring release makes it possible, be left as true
### unless you know exactly what you are doing!
### valid values are: true, false (true is the default)
struts.objectFactory.spring.useClassCache = true

### if specified, the default object type determiner can be overridden here
### Note: short-hand notation is supported in some cases, such as "tiger" or "notiger"
###       Alternatively, you can provide a com.opensymphony.xwork2.util.ObjectTypeDeterminer implementation name here
### Note: By default, com.opensymphony.xwork2.util.DefaultObjectTypeDeterminer is used which handles type detection
###       using generics. com.opensymphony.xwork2.util.GenericsObjectTypeDeterminer was deprecated since XWork 2, it's
###       functions are integrated in DefaultObjectTypeDeterminer now.
###       To disable tiger support use the "notiger" property value here.
#struts.objectTypeDeterminer = tiger
#struts.objectTypeDeterminer = notiger

### Parser to handle HTTP POST requests, encoded using the MIME-type multipart/form-data
# struts.multipart.parser=cos
# struts.multipart.parser=pell
struts.multipart.parser=jakarta
# uses javax.servlet.context.tempdir by default
struts.multipart.saveDir=
struts.multipart.maxSize=2097152

### Load custom property files (does not override struts.properties!)
# struts.custom.properties=application,org/apache/struts2/extension/custom

### How request URLs are mapped to and from actions
#struts.mapper.class=org.apache.struts2.dispatcher.mapper.DefaultActionMapper

### Used by the DefaultActionMapper
### You may provide a comma separated list, e.g. struts.action.extension=action,jnlp,do
struts.action.extension=action

### Used by FilterDispatcher
### If true then Struts serves static content from inside its jar. 
### If false then the static content must be available at <context_path>/struts
struts.serve.static=true

### Used by FilterDispatcher
### This is good for development where one wants changes to the static content be
### fetch on each request. 
### NOTE: This will only have effect if struts.serve.static=true
### If true -> Struts will write out header for static contents such that they will
###             be cached by web browsers (using Date, Cache-Content, Pragma, Expires)
###             headers).
### If false -> Struts will write out header for static contents such that they are
###            NOT to be cached by web browser (using Cache-Content, Pragma, Expires
###            headers)
struts.serve.static.browserCache=true

### Set this to false if you wish to disable implicit dynamic method invocation
### via the URL request. This includes URLs like foo!bar.action, as well as params
### like method:bar (but not action:foo). 
### An alternative to implicit dynamic method invocation is to use wildcard 
### mappings, such as <action name="*/*" method="{2}" class="actions.{1}">
struts.enable.DynamicMethodInvocation = true

### Set this to true if you wish to allow slashes in your action names.  If false,
### Actions names cannot have slashes, and will be accessible via any directory
### prefix.  This is the traditional behavior expected of WebWork applications.
### Setting to true is useful when you want to use wildcards and store values
### in the URL, to be extracted by wildcard patterns, such as 
### <action name="*/*" method="{2}" class="actions.{1}"> to match "/foo/edit" or 
### "/foo/save".
struts.enable.SlashesInActionNames = false

### use alternative syntax that requires %{} in most places
### to evaluate expressions for String attributes for tags
struts.tag.altSyntax=true

### when set to true, Struts will act much more friendly for developers. This
### includes:
### - struts.i18n.reload = true
### - struts.configuration.xml.reload = true
### - raising various debug or ignorable problems to errors
###   For example: normally a request to foo.action?someUnknownField=true should
###                be ignored (given that any value can come from the web and it
###                should not be trusted). However, during development, it may be
###                useful to know when these errors are happening and be told of
###                them right away.
struts.devMode = false

### when set to true, resource bundles will be reloaded on _every_ request.
### this is good during development, but should never be used in production
struts.i18n.reload=false

### Standard UI theme
### Change this to reflect which path should be used for JSP control tag templates by default
struts.ui.theme=xhtml
struts.ui.templateDir=template
#sets the default template type. Either ftl, vm, or jsp
struts.ui.templateSuffix=ftl

### Configuration reloading
### This will cause the configuration to reload struts.xml when it is changed
struts.configuration.xml.reload=false

### Location of velocity.properties file.  defaults to velocity.properties
struts.velocity.configfile = velocity.properties

### Comma separated list of VelocityContext classnames to chain to the StrutsVelocityContext
struts.velocity.contexts =

### Location of the velocity toolbox
struts.velocity.toolboxlocation=

### used to build URLs, such as the UrlTag
struts.url.http.port = 80
struts.url.https.port = 443
### possible values are: none, get or all
struts.url.includeParams = get

### Load custom default resource bundles
# struts.custom.i18n.resources=testmessages,testmessages2

### workaround for some app servers that don't handle HttpServletRequest.getParameterMap()
### often used for WebLogic, Orion, and OC4J
struts.dispatcher.parametersWorkaround = false

### configure the Freemarker Manager class to be used
### Allows user to plug-in customised Freemarker Manager if necessary
### MUST extends off org.apache.struts2.views.freemarker.FreemarkerManager
#struts.freemarker.manager.classname=org.apache.struts2.views.freemarker.FreemarkerManager

### Enables caching of FreeMarker templates
### Has the same effect as copying the templates under WEB_APP/templates
struts.freemarker.templatesCache=false

### See the StrutsBeanWrapper javadocs for more information
struts.freemarker.wrapper.altMap=true

### configure the XSLTResult class to use stylesheet caching.
### Set to true for developers and false for production.
struts.xslt.nocache=false

### A list of configuration files automatically loaded by Struts
struts.configuration.files=struts-default.xml,struts-plugin.xml,struts.xml

### Whether to always select the namespace to be everything before the last slash or not
struts.mapper.alwaysSelectFullNamespace=false

### END SNIPPET: complete_file

其中的一些解释：

struts.i18n.encoding=UTF-8，表示struts2默认编码；

struts.objectFactory.spring.autoWire = name，表示spring默认加载方式，按name形式加载Bean；

struts.multipart.saveDir= ，表示上传文件的保存路径

struts.multipart.maxSize=2097152，表示上传文件的最大字节数

struts.action.extension=action，表示后缀扩展名，即表单提交时的action中的url后缀