C51轮询多个独立按键

C51轮询多个独立按键

注：
P3 [3:0] 分别对应 4个独立按键
P2 [7:0] 分别对应 8个流水灯

#include "reg52.h"			

#define LEN 9

unsigned int  Dly, i;
unsigned char step = 0;
unsigned char mod = 0;
unsigned char spd = 0;

unsigned char F_LED[3][LEN] = {				//通过更改数组来更改流水灯样式
	{0x01,0x02,0x04,0x08,0x10,0x10,0x20,0x40,0x80},
	{0x18,0x24,0x42,0x81,0x00,0x81,0x42,0x24,0x18},
	{0xA5,0x5A,0xA5,0x5A,0xA5,0x5A,0xA5,0x5A,0xA5}
};

void delay(unsigned char i){
	while(i--);
}

void key_check(void){
	if(P3==0x0F) delay(1000);
	else {
		delay(1000);
		return;
	}
	P3 &= 0x0F;
	if(!(P3&0x01)){					//press k2
		mod = mod+2;				//mod = 3 + mod-1
		mod %= 3;	
	}
	else if(!(P3&0x02)){			//press k1
		mod++;
		mod %= 3;
	}
	else if(!(P3&0x04)){			//press k3
		spd += 0x40;
	}
	else if(!(P3&0x08)){			//press k4    func: reset
		step = 0;
		mod = 0;
		spd = 0;
	}
	return;
}

void main()
{	
	P3 = 0x0F;						//由单片机要求，写 ‘1’ 以正确读取管脚输入信号
	while(1){
		Dly = 250 + 2*spd;
		for(i = 0; i < Dly; i++){			//delay
			key_check();
			//delay(1)
			P2=F_LED[mod][step];
		}
		step++;
		step %= LEN;
		P2=F_LED[mod][step];
	}
}