重发布实验-----简单版

依照图配置IP

 

配置RIP

[r1]rip 1

[r1-rip-1]version 2

[r1-rip-1]network 1.0.0.0

[r1-rip-1]network 192.168.1.0

[r4]rip 1

[r4-rip-1]version 2

[r4-rip-1]network 192.168.2.0

配置OSPF

[r1]ospf 1[r1-ospf-1]area 0

[r1-ospf-1-area-0.0.0.0]network 1.1.1.1 0.0.0.0

[r1-ospf-1-area-0.0.0.0]network 192.168.3.1 0.0.0.0

[r4]ospf 1

[r4-ospf-1]area 0

[r4-ospf-1-area-0.0.0.0]network 4.4.4.4 0.0.0.0

[r4-ospf-1-area-0.0.0.0]network 192.168.4.1 0.0.0.0

进行双向重发布，控制选路

ospf重发布到RIP的控制选路

[r1]ip ip-prefix a index 10 permit 192.168.4.0 30

[r1]ip ip-prefix a index 20 permit 4.4.4.0 24               //前缀列表

[r1-GigabitEthernet0/0/0]rip metricout ip-prefix a 3    //在该接口出方向上匹配前缀列表a，度量加3

[r1-rip-1]import-route ospf 1

[r4]ip ip-prefix a index 10 permit 192.168.3.0 30

[r4-GigabitEthernet0/0/0]rip metricout ip-prefix a 3

[r4-rip-1]import-route ospf 1

RIP重发布到OSPF的控制选路

[r1]ip ip-prefix c  permit 1.1.1.0 24

[r4]ip ip-prefix b index 10 permit 192.168.1.0 30   

[r4]route-policy huahua permit node 10      //创建名位huahua的路由策略，大动作允许，序列号10

[r4-route-policy]if-match ip-prefix b             //匹配前缀列表a

[r4-route-policy]apply cost 3                      //将度量改位3

[r4]route-policy huahua permit node 20            //空表，允许所有

[r4-ospf-1]import-route rip 1 route-policy huahua

[r1]ip ip-prefix c  permit 192.168.2.0 30

[r1]route-policy huahua permit node 10

[r1-route-policy]if-match ip-prefix c

[r1-route-policy]apply cost 3

[r1]route-policy huahua permit node 30

[r1-ospf-1]import-route rip 1 route-policy huahua

R2路由表

 R3路由表

 

将R3的G0/0/0口shutdown后，R3的路由表