单片机时钟实验

用8051控制，工作晶振为6M

7279作显示控制，cs 连接到P10 clk 接到P14  dat 接到P15 key 接到P3.3（INT1）

刚开始时，程序运行起来了，但是不显示，后来查看7279手册后发现7279传送指令时CLK的脉冲宽度为8us，修改延时后，可以。

#include <reg51.h> #include <absacc.h> #define CMD_RESET 0xa4 //restart sbit cs=P1^0; // cs P1.0 sbit clk=P1^4; // clk P1.4 sbit dat=P1^5; // data P1.5 sbit key=P3^3; // key P3.3 struct time { char second; char minute; char hour; }current_time; void long_delay(void) { unsigned char i; for (i=0;i<30;i++); } void short_delay(void) { unsigned char i; for (i=0;i<3;i++); } void send_byte(unsigned char out_byte) { unsigned char i; cs=0; long_delay(); for (i=0;i<8;i++) { if (out_byte&0x80) dat=1; else dat=0; clk=1; short_delay(); clk=0; short_delay(); out_byte=out_byte*2; } dat=0; } void send7279(unsigned char cmd, unsigned char dta) { send_byte (cmd); send_byte (dta); } void time1(void) interrupt 3 { static buf=0; TR1 = 0; TL1 = 0xaf; TH1 = 0x3c; buf++; if(buf>9) { buf=0; current_time.second++; if(current_time.second>59) { current_time.second = 0; current_time.minute++; if(current_time.minute>59) { current_time.minute=0; current_time.hour++; } } } TR1 = 1; } void main() { TMOD = 0x10; TL1 = 0xaf; TH1 = 0x3c; IE = 0x88; current_time.second = 0; current_time.minute = 0; current_time.hour = 0; send_byte(0xa4); send7279(0x82,0x0a); send7279(0x85,0x0a); TR1 = 1; while(1) { send7279(0x80,current_time.second%10); send7279(0x81,current_time.second/10); send7279(0x83,current_time.minute%10); send7279(0x84,current_time.minute/10); send7279(0x86,current_time.hour%10); send7279(0x87,current_time.hour/10); } }